From: Linus Walleij Date: Thu, 11 Oct 2012 14:33:44 +0000 (+0200) Subject: pinctrl/nomadik: always use the simple irqdomain X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=51f58c68a364363b29c07668c90af19c9b8a8c85;p=linux-beck.git pinctrl/nomadik: always use the simple irqdomain Since the simple irqdomain will fall back to a linear domain if the first_irq provided is <= 0, just use this, just make sure the first_irq is negative in the device tree case. Cc: Rob Herring Acked-by: Lee Jones Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index f640f13f73ca..01aea1c3b5fa 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1281,6 +1281,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) struct clk *clk; int secondary_irq; void __iomem *base; + int irq_start = -1; int irq; int ret; @@ -1384,19 +1385,11 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) platform_set_drvdata(dev, nmk_chip); - if (np) { - /* The DT case will just grab a set of IRQ numbers */ - nmk_chip->domain = irq_domain_add_linear(np, NMK_GPIO_PER_CHIP, - &nmk_gpio_irq_simple_ops, nmk_chip); - } else { - /* Non-DT legacy mode, use hardwired IRQ numbers */ - int irq_start; - + if (!np) irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio); - nmk_chip->domain = irq_domain_add_simple(NULL, + nmk_chip->domain = irq_domain_add_simple(NULL, NMK_GPIO_PER_CHIP, irq_start, &nmk_gpio_irq_simple_ops, nmk_chip); - } if (!nmk_chip->domain) { dev_err(&dev->dev, "failed to create irqdomain\n"); ret = -ENOSYS;