From: Tim Kryger <tim.kryger@gmail.com>
Date: Wed, 25 Jun 2014 07:25:34 +0000 (-0700)
Subject: mmc: sdhci: Improve external VDD regulator support
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=52221610dd84dc3e9196554f0292ca9e8ab3541d;p=linux-beck.git

mmc: sdhci: Improve external VDD regulator support

A standard compliant SDHCI can itself supply VDD at 1.8, 3.0, or 3.3v.
Several vendors ignore this and instead rely upon external regulators
to supply VDD.  While the external regulators typically can supply one
of the standard SDHCI voltage levels, there is no real reason for this
to be a hard requirement.

This patch alters the SDHCI driver such that external VDD regulators
that provide voltages other than the three mentioned above may be used
so long as they can supply a voltage that meets the needs of the card.

In the case that an external VDD regulator is provided, it is reasonable
to ignore the voltage capabilities of the host controller and allow the
external regulator to set the OCR mask.  Additionally, there is no need
to convert a VDD voltage request into one of the standard SDHCI voltage
levels or program it in the host controller's power control register.

Signed-off-by: Tim Kryger <tim.kryger@gmail.com>
Tested-by: Sachin Kamat <spk.linux@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index c23a87285a95..07a242675c0e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1226,6 +1226,13 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 	struct mmc_host *mmc = host->mmc;
 	u8 pwr = 0;
 
+	if (!IS_ERR(mmc->supply.vmmc)) {
+		spin_unlock_irq(&host->lock);
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd);
+		spin_lock_irq(&host->lock);
+		return;
+	}
+
 	if (mode != MMC_POWER_OFF) {
 		switch (1 << vdd) {
 		case MMC_VDD_165_195:
@@ -1284,12 +1291,6 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
 		if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
 			mdelay(10);
 	}
-
-	if (!IS_ERR(mmc->supply.vmmc)) {
-		spin_unlock_irq(&host->lock);
-		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd);
-		spin_lock_irq(&host->lock);
-	}
 }
 
 /*****************************************************************************\
@@ -3092,8 +3093,9 @@ int sdhci_add_host(struct sdhci_host *host)
 				   SDHCI_MAX_CURRENT_MULTIPLIER;
 	}
 
+	/* If OCR set by external regulators, use it instead */
 	if (mmc->ocr_avail)
-		ocr_avail &= mmc->ocr_avail;
+		ocr_avail = mmc->ocr_avail;
 
 	if (host->ocr_mask)
 		ocr_avail &= host->ocr_mask;