From: Matt Ranostay Date: Sat, 4 Feb 2017 10:22:50 +0000 (-0800) Subject: devicetree: add documentation for MAX30102 oximeter X-Git-Tag: v4.12-rc1~84^2~771^2~44 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5247dd46cf1c2e3300545ea102b866a46aaddbc3;p=karo-tx-linux.git devicetree: add documentation for MAX30102 oximeter Acked-by: Rob Herring Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt new file mode 100644 index 000000000000..c695e7cbeefb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt @@ -0,0 +1,30 @@ +Maxim MAX30102 heart rate and pulse oximeter sensor + +* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf + +Required properties: + - compatible: must be "maxim,max30102" + - reg: the I2C address of the sensor + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic + interrupt client node bindings. + +Optional properties: + - maxim,red-led-current-microamp: configuration for RED LED current + - maxim,ir-led-current-microamp: configuration for IR LED current + + Note that each step is approximately 200 microamps, ranging from 0 uA to + 50800 uA. + +Example: + +max30100@57 { + compatible = "maxim,max30102"; + reg = <0x57>; + maxim,red-led-current-microamp = <7000>; + maxim,ir-led-current-microamp = <7000>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; +};