From: Rajkumar Manoharan Date: Thu, 20 Oct 2011 08:52:43 +0000 (+0530) Subject: ath9k_hw: Fix regression of register offset for AR9003 chips X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=52d6d4ef5e6d1517688e27c11c01ab303ec681dd;p=linux-beck.git ath9k_hw: Fix regression of register offset for AR9003 chips My recent commits (3782c69d, 324c74a) introduced regression for register offset selection that based on the macversion. Not using parentheses in proper manner for ternary operator leads to select wrong offset for the registers. This issue was observed with AR9462 chip that immediate disconnect after the association with the following message ieee80211 phy3: wlan0: Failed to send nullfunc to AP 00:23:69:12:ea:47 after 500ms, disconnecting. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 2f4023e66081..70e01031714f 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -572,14 +572,14 @@ #define AR_PHY_TXGAIN_TABLE (AR_SM_BASE + 0x300) -#define AR_PHY_TX_IQCAL_CONTROL_0 (AR_SM_BASE + AR_SREV_9485(ah) ? \ - 0x3c4 : 0x444) -#define AR_PHY_TX_IQCAL_CONTROL_1 (AR_SM_BASE + AR_SREV_9485(ah) ? \ - 0x3c8 : 0x448) -#define AR_PHY_TX_IQCAL_START (AR_SM_BASE + AR_SREV_9485(ah) ? \ - 0x3c4 : 0x440) -#define AR_PHY_TX_IQCAL_STATUS_B0 (AR_SM_BASE + AR_SREV_9485(ah) ? \ - 0x3f0 : 0x48c) +#define AR_PHY_TX_IQCAL_CONTROL_0 (AR_SM_BASE + (AR_SREV_9485(ah) ? \ + 0x3c4 : 0x444)) +#define AR_PHY_TX_IQCAL_CONTROL_1 (AR_SM_BASE + (AR_SREV_9485(ah) ? \ + 0x3c8 : 0x448)) +#define AR_PHY_TX_IQCAL_START (AR_SM_BASE + (AR_SREV_9485(ah) ? \ + 0x3c4 : 0x440)) +#define AR_PHY_TX_IQCAL_STATUS_B0 (AR_SM_BASE + (AR_SREV_9485(ah) ? \ + 0x3f0 : 0x48c)) #define AR_PHY_TX_IQCAL_CORR_COEFF_B0(_i) (AR_SM_BASE + \ (AR_SREV_9485(ah) ? \ 0x3d0 : 0x450) + ((_i) << 2)) @@ -931,10 +931,10 @@ #define AR_PHY_AIC_SRAM_ADDR_B1 (AR_SM1_BASE + 0x5f0) #define AR_PHY_AIC_SRAM_DATA_B1 (AR_SM1_BASE + 0x5f4) -#define AR_PHY_RTT_TABLE_SW_INTF_B(i) (0x384 + (i) ? \ - AR_SM1_BASE : AR_SM_BASE) -#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i) (0x388 + (i) ? \ - AR_SM1_BASE : AR_SM_BASE) +#define AR_PHY_RTT_TABLE_SW_INTF_B(i) (0x384 + ((i) ? \ + AR_SM1_BASE : AR_SM_BASE)) +#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i) (0x388 + ((i) ? \ + AR_SM1_BASE : AR_SM_BASE)) /* * Channel 2 Register Map */