From: Tom Yan Date: Thu, 21 Jul 2016 18:41:54 +0000 (+0800) Subject: libata-scsi: fix MODE SELECT translation for Control mode page X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=535fd072202dbc8afe5a4093178132bdd4ac2424;p=linux-beck.git libata-scsi: fix MODE SELECT translation for Control mode page scsi_done() was called repeatedly and apparently because of that, the kernel would call trace when we touch the Control mode page: Call Trace: [] dump_stack+0x63/0x81 [] __warn+0xcb/0xf0 [] warn_slowpath_null+0x1d/0x20 [] ata_eh_finish+0xe0/0xf0 [libata] [] sata_pmp_error_handler+0x640/0xa50 [libata] [] ahci_error_handler+0x1d/0x70 [libahci] [] ata_scsi_port_error_handler+0x430/0x770 [libata] [] ? ata_scsi_cmd_error_handler+0xdd/0x160 [libata] [] ata_scsi_error+0xa7/0xf0 [libata] [] scsi_error_handler+0xaa/0x560 [scsi_mod] [] ? scsi_eh_get_sense+0x180/0x180 [scsi_mod] [] kthread+0xd8/0xf0 [] ret_from_fork+0x1f/0x40 [] ? kthread_worker_fn+0x170/0x170 ---[ end trace 8b7501047e928a17 ]--- Removed the unnecessary code and let ata_scsi_translate() do the job. Also, since ata_mselect_control() has no ATA command to send to the device, ata_scsi_mode_select_xlat() should return 1 for it, so that ata_scsi_translate() will finish early to avoid ata_qc_issue(). Signed-off-by: Tom Yan Signed-off-by: Tejun Heo --- diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 0bc4532bb60a..be9c76c938b2 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3701,8 +3701,6 @@ static int ata_mselect_control(struct ata_queued_cmd *qc, dev->flags |= ATA_DFLAG_D_SENSE; else dev->flags &= ~ATA_DFLAG_D_SENSE; - qc->scsicmd->result = SAM_STAT_GOOD; - qc->scsicmd->scsi_done(qc->scsicmd); return 0; } @@ -3829,6 +3827,8 @@ static unsigned int ata_scsi_mode_select_xlat(struct ata_queued_cmd *qc) if (ata_mselect_control(qc, p, pg_len, &fp) < 0) { fp += hdr_len + bd_len; goto invalid_param; + } else { + goto skip; /* No ATA command to send */ } break; default: /* invalid page code */