From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 23 Aug 2016 19:32:51 +0000 (-0400)
Subject: USB: avoid left shift by -1
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=53e5f36fbd2453ad69a3369a1db62dc06c30a4aa;p=linux-beck.git

USB: avoid left shift by -1

UBSAN complains about a left shift by -1 in proc_do_submiturb().  This
can occur when an URB is submitted for a bulk or control endpoint on
a high-speed device, since the code doesn't bother to check the
endpoint type; normally only interrupt or isochronous endpoints have
a nonzero bInterval value.

Aside from the fact that the operation is illegal, it shouldn't matter
because the result isn't used.  Still, in theory it could cause a
hardware exception or other problem, so we should work around it.
This patch avoids doing the left shift unless the shift amount is >= 0.

The same piece of code has another problem.  When checking the device
speed (the exponential encoding for interrupt endpoints is used only
by high-speed or faster devices), we need to look for speed >=
USB_SPEED_SUPER as well as speed == USB_SPEED HIGH.  The patch adds
this check.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Vittorio Zecca <zeccav@gmail.com>
Tested-by: Vittorio Zecca <zeccav@gmail.com>
Suggested-by: Bjørn Mork <bjorn@mork.no>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index e6a6d67c8705..09c8d9ca61ae 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1709,11 +1709,17 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb
 	as->urb->start_frame = uurb->start_frame;
 	as->urb->number_of_packets = number_of_packets;
 	as->urb->stream_id = stream_id;
-	if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
-			ps->dev->speed == USB_SPEED_HIGH)
-		as->urb->interval = 1 << min(15, ep->desc.bInterval - 1);
-	else
-		as->urb->interval = ep->desc.bInterval;
+
+	if (ep->desc.bInterval) {
+		if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
+				ps->dev->speed == USB_SPEED_HIGH ||
+				ps->dev->speed >= USB_SPEED_SUPER)
+			as->urb->interval = 1 <<
+					min(15, ep->desc.bInterval - 1);
+		else
+			as->urb->interval = ep->desc.bInterval;
+	}
+
 	as->urb->context = as;
 	as->urb->complete = async_completed;
 	for (totlen = u = 0; u < number_of_packets; u++) {