From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: Tue, 30 Apr 2013 17:24:35 +0000 (+0200)
Subject: ARM: dove: add si5351 clock driver to CuBox DT
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=53e9cb1dcde882cc667497328eca776a9835f965;p=linux-beck.git

ARM: dove: add si5351 clock driver to CuBox DT

This patch adds the device tree node for si5351 clock generator
and the corresponding oscillator connected to it. It also limits
i2c frequency to 100kHz as there are bus locks reported on higher
frequencies.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---

diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 7e3065abd751..5cae2ab69762 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -44,11 +44,60 @@
 			gpio = <&gpio0 1 0>;
 		};
 	};
+
+	clocks {
+		/* 25MHz reference crystal */
+		ref25: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
 };
 
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	si5351: clock-generator {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+
+		clkout1 {
+			reg = <1>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+
+		clkout2 {
+			reg = <2>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+		};
+	};
+};
 
 &sdio0 {
 	status = "okay";