From: Helmut Klein Date: Wed, 11 Nov 2015 14:03:04 +0000 (+0100) Subject: ARM: dts: Kirkwood: Fix QNAP TS219 power-off X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5442f0eadf2885453d5b2ed8c8592f32a3744f8e;p=linux-beck.git ARM: dts: Kirkwood: Fix QNAP TS219 power-off The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi" addressed the wrong uart (0 = console). This patch changes the address to select uart 1, which is the uart connected to the pic microcontroller, which can switch the device off. Signed-off-by: Helmut Klein Signed-off-by: Andrew Lunn Fixes: 4350a47bbac3 ("ARM: Kirkwood: Make use of the QNAP Power off driver.") Signed-off-by: Gregory CLEMENT --- diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index c56ab6bbfe3c..0e46560551f4 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -40,7 +40,7 @@ }; poweroff@12100 { compatible = "qnap,power-off"; - reg = <0x12000 0x100>; + reg = <0x12100 0x100>; clocks = <&gate_clk 7>; }; spi@10600 {