From: Brice Goglin Date: Mon, 7 May 2007 21:52:22 +0000 (+0200) Subject: myri10ge: replace the chipset whitelist with firmware autodetection X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5443e9ead4f53fd7a43e6846cf10fdc0c5366a93;p=mv-sheeva.git myri10ge: replace the chipset whitelist with firmware autodetection Remove the aligned-completion whitelist, and replace it by using the 1.4.16 firmware's auto-detection features to choose which firmware to load. The driver now loads the aligned firmware, performs a MXGEFW_CMD_UNALIGNED_TEST, and falls back to using the unaligned firmware if: - The firmware is too old (ie, MXGEFW_CMD_UNALIGNED_TEST is an unknown command). - The MXGEFW_CMD_UNALIGNED_TEST returns MXGEFW_CMD_ERROR_UNALIGNED, meaning that it has seen an unaligned completion during the DMA test. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index f53b0dad65a..5d14be7405a 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -355,6 +355,8 @@ myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd, return 0; } else if (result == MXGEFW_CMD_UNKNOWN) { return -ENOSYS; + } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) { + return -E2BIG; } else { dev_err(&mgp->pdev->dev, "command %d failed, result = %d\n", @@ -2483,8 +2485,6 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp) err_cap |= PCI_ERR_CAP_ECRC_GENE; pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap); dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge)); - mgp->tx.boundary = 4096; - mgp->fw_name = myri10ge_fw_aligned; } /* @@ -2506,22 +2506,70 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp) * firmware image, and set tx.boundary to 4KB. */ -#define PCI_DEVICE_ID_INTEL_E5000_PCIE23 0x25f7 -#define PCI_DEVICE_ID_INTEL_E5000_PCIE47 0x25fa -#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1 0x3510 -#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4 0x351b -#define PCI_DEVICE_ID_INTEL_E3000_PCIE 0x2779 -#define PCI_DEVICE_ID_INTEL_E3010_PCIE 0x277a -#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST 0x140 -#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST 0x142 - -static void myri10ge_select_firmware(struct myri10ge_priv *mgp) +static void myri10ge_firmware_probe(struct myri10ge_priv *mgp) { - struct pci_dev *bridge = mgp->pdev->bus->self; + struct pci_dev *pdev = mgp->pdev; + struct device *dev = &pdev->dev; + int cap, status; + u16 val; + mgp->tx.boundary = 4096; + /* + * Verify the max read request size was set to 4KB + * before trying the test with 4KB. + */ + cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); + if (cap < 64) { + dev_err(dev, "Bad PCI_CAP_ID_EXP location %d\n", cap); + goto abort; + } + status = pci_read_config_word(pdev, cap + PCI_EXP_DEVCTL, &val); + if (status != 0) { + dev_err(dev, "Couldn't read max read req size: %d\n", status); + goto abort; + } + if ((val & (5 << 12)) != (5 << 12)) { + dev_warn(dev, "Max Read Request size != 4096 (0x%x)\n", val); + mgp->tx.boundary = 2048; + } + /* + * load the optimized firmware (which assumes aligned PCIe + * completions) in order to see if it works on this host. + */ + mgp->fw_name = myri10ge_fw_aligned; + status = myri10ge_load_firmware(mgp); + if (status != 0) { + goto abort; + } + + /* + * Enable ECRC if possible + */ + myri10ge_enable_ecrc(mgp); + + /* + * Run a DMA test which watches for unaligned completions and + * aborts on the first one seen. + */ + + status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST); + if (status == 0) + return; /* keep the aligned firmware */ + + if (status != -E2BIG) + dev_warn(dev, "DMA test failed: %d\n", status); + if (status == -ENOSYS) + dev_warn(dev, "Falling back to ethp! " + "Please install up to date fw\n"); +abort: + /* fall back to using the unaligned firmware */ mgp->tx.boundary = 2048; mgp->fw_name = myri10ge_fw_unaligned; +} + +static void myri10ge_select_firmware(struct myri10ge_priv *mgp) +{ if (myri10ge_force_firmware == 0) { int link_width, exp_cap; u16 lnk; @@ -2530,8 +2578,6 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp) pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk); link_width = (lnk >> 4) & 0x3f; - myri10ge_enable_ecrc(mgp); - /* Check to see if Link is less than 8 or if the * upstream bridge is known to provide aligned * completions */ @@ -2540,46 +2586,8 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp) link_width); mgp->tx.boundary = 4096; mgp->fw_name = myri10ge_fw_aligned; - } else if (bridge && - /* ServerWorks HT2000/HT1000 */ - ((bridge->vendor == PCI_VENDOR_ID_SERVERWORKS - && bridge->device == - PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE) - /* ServerWorks HT2100 */ - || (bridge->vendor == PCI_VENDOR_ID_SERVERWORKS - && bridge->device >= - PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST - && bridge->device <= - PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST) - /* All Intel E3000/E3010 PCIE ports */ - || (bridge->vendor == PCI_VENDOR_ID_INTEL - && (bridge->device == - PCI_DEVICE_ID_INTEL_E3000_PCIE - || bridge->device == - PCI_DEVICE_ID_INTEL_E3010_PCIE)) - /* All Intel 6310/6311/6321ESB PCIE ports */ - || (bridge->vendor == PCI_VENDOR_ID_INTEL - && bridge->device >= - PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1 - && bridge->device <= - PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4) - /* All Intel E5000 PCIE ports */ - || (bridge->vendor == PCI_VENDOR_ID_INTEL - && bridge->device >= - PCI_DEVICE_ID_INTEL_E5000_PCIE23 - && bridge->device <= - PCI_DEVICE_ID_INTEL_E5000_PCIE47))) { - dev_info(&mgp->pdev->dev, - "Assuming aligned completions (0x%x:0x%x)\n", - bridge->vendor, bridge->device); - mgp->tx.boundary = 4096; - mgp->fw_name = myri10ge_fw_aligned; - } else if (bridge && - bridge->vendor == PCI_VENDOR_ID_SGI && - bridge->device == 0x4002 /* TIOCE pcie-port */ ) { - /* this pcie bridge does not support 4K rdma request */ - mgp->tx.boundary = 2048; - mgp->fw_name = myri10ge_fw_aligned; + } else { + myri10ge_firmware_probe(mgp); } } else { if (myri10ge_force_firmware == 1) { @@ -2847,7 +2855,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) status = -ENODEV; goto abort_with_netdev; } - myri10ge_select_firmware(mgp); /* Find the vendor-specific cap so we can check * the reboot register later on */ @@ -2941,6 +2948,8 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto abort_with_ioremap; memset(mgp->rx_done.entry, 0, bytes); + myri10ge_select_firmware(mgp); + status = myri10ge_load_firmware(mgp); if (status != 0) { dev_err(&pdev->dev, "failed to load firmware\n");