From: Lars-Peter Clausen <lars@metafoo.de>
Date: Fri, 15 Feb 2013 16:57:13 +0000 (+0100)
Subject: hwmon: (adt7410) Use I2C_ADDRS helper macro
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=54be068d19ccdad6864dd8a24c20885af26f851c;p=linux-beck.git

hwmon: (adt7410) Use I2C_ADDRS helper macro

Use the I2C_ADDRS macro to initialize the I2C device's address_list. Doing so
saves a few lines of boilerplate code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---

diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
index 4ae16e05ca28..99f6d3239cba 100644
--- a/drivers/hwmon/adt7410.c
+++ b/drivers/hwmon/adt7410.c
@@ -78,10 +78,6 @@ enum adt7410_type {		/* keep sorted in alphabetical order */
 	adt7410,
 };
 
-/* Addresses scanned */
-static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
-					I2C_CLIENT_END };
-
 static const u8 ADT7410_REG_TEMP[4] = {
 	ADT7410_TEMPERATURE,		/* input */
 	ADT7410_T_ALARM_HIGH,		/* high */
@@ -453,7 +449,7 @@ static struct i2c_driver adt7410_driver = {
 	.probe		= adt7410_probe,
 	.remove		= adt7410_remove,
 	.id_table	= adt7410_ids,
-	.address_list	= normal_i2c,
+	.address_list	= I2C_ADDRS(0x48, 0x49, 0x4a, 0x4b),
 };
 
 module_i2c_driver(adt7410_driver);