From: Avinash Patil Date: Wed, 1 Oct 2014 17:55:25 +0000 (-0700) Subject: mwifiex: few more register offset entries for sdio card structure X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=554a0113ccb149e3d04ceb608114a3425c507f00;p=linux-beck.git mwifiex: few more register offset entries for sdio card structure This patch adds some more defitions to card specific register structure and removes static defines for these registers. Signed-off-by: Avinash Patil Signed-off-by: Cathy Luo Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index db9e4e347e4c..a22e9a91f2f2 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -448,28 +448,31 @@ static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter) static int mwifiex_init_sdio_new_mode(struct mwifiex_adapter *adapter) { u8 reg; + struct sdio_mmc_card *card = adapter->card; adapter->ioport = MEM_PORT; /* enable sdio new mode */ - if (mwifiex_read_reg(adapter, CARD_CONFIG_2_1_REG, ®)) + if (mwifiex_read_reg(adapter, card->reg->card_cfg_2_1_reg, ®)) return -1; - if (mwifiex_write_reg(adapter, CARD_CONFIG_2_1_REG, + if (mwifiex_write_reg(adapter, card->reg->card_cfg_2_1_reg, reg | CMD53_NEW_MODE)) return -1; /* Configure cmd port and enable reading rx length from the register */ - if (mwifiex_read_reg(adapter, CMD_CONFIG_0, ®)) + if (mwifiex_read_reg(adapter, card->reg->cmd_cfg_0, ®)) return -1; - if (mwifiex_write_reg(adapter, CMD_CONFIG_0, reg | CMD_PORT_RD_LEN_EN)) + if (mwifiex_write_reg(adapter, card->reg->cmd_cfg_0, + reg | CMD_PORT_RD_LEN_EN)) return -1; /* Enable Dnld/Upld ready auto reset for cmd port after cmd53 is * completed */ - if (mwifiex_read_reg(adapter, CMD_CONFIG_1, ®)) + if (mwifiex_read_reg(adapter, card->reg->cmd_cfg_1, ®)) return -1; - if (mwifiex_write_reg(adapter, CMD_CONFIG_1, reg | CMD_PORT_AUTO_EN)) + if (mwifiex_write_reg(adapter, card->reg->cmd_cfg_1, + reg | CMD_PORT_AUTO_EN)) return -1; return 0; @@ -496,17 +499,17 @@ static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter) } /* Read the IO port */ - if (!mwifiex_read_reg(adapter, IO_PORT_0_REG, ®)) + if (!mwifiex_read_reg(adapter, card->reg->io_port_0_reg, ®)) adapter->ioport |= (reg & 0xff); else return -1; - if (!mwifiex_read_reg(adapter, IO_PORT_1_REG, ®)) + if (!mwifiex_read_reg(adapter, card->reg->io_port_1_reg, ®)) adapter->ioport |= ((reg & 0xff) << 8); else return -1; - if (!mwifiex_read_reg(adapter, IO_PORT_2_REG, ®)) + if (!mwifiex_read_reg(adapter, card->reg->io_port_2_reg, ®)) adapter->ioport |= ((reg & 0xff) << 16); else return -1; @@ -514,8 +517,8 @@ cont: pr_debug("info: SDIO FUNC1 IO port: %#x\n", adapter->ioport); /* Set Host interrupt reset to read to clear */ - if (!mwifiex_read_reg(adapter, HOST_INT_RSR_REG, ®)) - mwifiex_write_reg(adapter, HOST_INT_RSR_REG, + if (!mwifiex_read_reg(adapter, card->reg->host_int_rsr_reg, ®)) + mwifiex_write_reg(adapter, card->reg->host_int_rsr_reg, reg | card->reg->sdio_int_mask); else return -1; @@ -708,7 +711,7 @@ static void mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter) struct sdio_func *func = card->func; sdio_claim_host(func); - mwifiex_write_reg_locked(func, HOST_INT_MASK_REG, 0); + mwifiex_write_reg_locked(func, card->reg->host_int_mask_reg, 0); sdio_release_irq(func); sdio_release_host(func); } @@ -729,7 +732,7 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter) return; } - sdio_ireg = card->mp_regs[HOST_INTSTATUS_REG]; + sdio_ireg = card->mp_regs[card->reg->host_int_status_reg]; if (sdio_ireg) { /* * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS @@ -794,7 +797,7 @@ static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter) } /* Simply write the mask to the register */ - ret = mwifiex_write_reg_locked(func, HOST_INT_MASK_REG, + ret = mwifiex_write_reg_locked(func, card->reg->host_int_mask_reg, card->reg->host_int_enable); if (ret) { dev_err(adapter->dev, "enable host interrupt failed\n"); @@ -1334,8 +1337,8 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) u32 pkt_type; /* read the len of control packet */ - rx_len = card->mp_regs[CMD_RD_LEN_1] << 8; - rx_len |= (u16) card->mp_regs[CMD_RD_LEN_0]; + rx_len = card->mp_regs[reg->cmd_rd_len_1] << 8; + rx_len |= (u16)card->mp_regs[reg->cmd_rd_len_0]; rx_blocks = DIV_ROUND_UP(rx_len, MWIFIEX_SDIO_BLOCK_SIZE); if (rx_len <= INTF_HEADER_LEN || (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) > @@ -1823,11 +1826,11 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter) sdio_set_drvdata(card->func, card); /* - * Read the HOST_INT_STATUS_REG for ACK the first interrupt got + * Read the host_int_status_reg for ACK the first interrupt got * from the bootloader. If we don't do this we get a interrupt * as soon as we register the irq. */ - mwifiex_read_reg(adapter, HOST_INTSTATUS_REG, &sdio_ireg); + mwifiex_read_reg(adapter, card->reg->host_int_status_reg, &sdio_ireg); /* Get SDIO ioport */ mwifiex_init_sdio_ioport(adapter); diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h index 6b8835ec88f1..5a08ebc882e4 100644 --- a/drivers/net/wireless/mwifiex/sdio.h +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -52,13 +52,9 @@ #define HOST_TERM_CMD53 (0x1U << 2) #define REG_PORT 0 #define MEM_PORT 0x10000 -#define CMD_RD_LEN_0 0xB4 -#define CMD_RD_LEN_1 0xB5 -#define CARD_CONFIG_2_1_REG 0xCD + #define CMD53_NEW_MODE (0x1U << 0) -#define CMD_CONFIG_0 0xB8 #define CMD_PORT_RD_LEN_EN (0x1U << 2) -#define CMD_CONFIG_1 0xB9 #define CMD_PORT_AUTO_EN (0x1U << 0) #define CMD_PORT_SLCT 0x8000 #define UP_LD_CMD_PORT_HOST_INT_STATUS (0x40U) @@ -70,38 +66,23 @@ /* Misc. Config Register : Auto Re-enable interrupts */ #define AUTO_RE_ENABLE_INT BIT(4) -/* Host Control Registers */ -/* Host Control Registers : I/O port 0 */ -#define IO_PORT_0_REG 0x78 -/* Host Control Registers : I/O port 1 */ -#define IO_PORT_1_REG 0x79 -/* Host Control Registers : I/O port 2 */ -#define IO_PORT_2_REG 0x7A - /* Host Control Registers : Configuration */ #define CONFIGURATION_REG 0x00 /* Host Control Registers : Host power up */ #define HOST_POWER_UP (0x1U << 1) -/* Host Control Registers : Host interrupt mask */ -#define HOST_INT_MASK_REG 0x02 /* Host Control Registers : Upload host interrupt mask */ #define UP_LD_HOST_INT_MASK (0x1U) /* Host Control Registers : Download host interrupt mask */ #define DN_LD_HOST_INT_MASK (0x2U) -/* Host Control Registers : Host interrupt status */ -#define HOST_INTSTATUS_REG 0x03 /* Host Control Registers : Upload host interrupt status */ #define UP_LD_HOST_INT_STATUS (0x1U) /* Host Control Registers : Download host interrupt status */ #define DN_LD_HOST_INT_STATUS (0x2U) -/* Host Control Registers : Host interrupt RSR */ -#define HOST_INT_RSR_REG 0x01 - /* Host Control Registers : Host interrupt status */ -#define HOST_INT_STATUS_REG 0x28 +#define CARD_INT_STATUS_REG 0x28 /* Card Control Registers : Card I/O ready */ #define CARD_IO_READY (0x1U << 3) @@ -203,10 +184,16 @@ struct mwifiex_sdio_card_reg { u8 base_1_reg; u8 poll_reg; u8 host_int_enable; + u8 host_int_rsr_reg; + u8 host_int_status_reg; + u8 host_int_mask_reg; u8 status_reg_0; u8 status_reg_1; u8 sdio_int_mask; u32 data_port_mask; + u8 io_port_0_reg; + u8 io_port_1_reg; + u8 io_port_2_reg; u8 max_mp_regs; u8 rd_bitmap_l; u8 rd_bitmap_u; @@ -219,6 +206,15 @@ struct mwifiex_sdio_card_reg { u8 rd_len_p0_l; u8 rd_len_p0_u; u8 card_misc_cfg_reg; + u8 card_cfg_2_1_reg; + u8 cmd_rd_len_0; + u8 cmd_rd_len_1; + u8 cmd_rd_len_2; + u8 cmd_rd_len_3; + u8 cmd_cfg_0; + u8 cmd_cfg_1; + u8 cmd_cfg_2; + u8 cmd_cfg_3; u8 fw_dump_ctrl; u8 fw_dump_start; u8 fw_dump_end; @@ -274,10 +270,16 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = { .base_1_reg = 0x0041, .poll_reg = 0x30, .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK, + .host_int_rsr_reg = 0x1, + .host_int_mask_reg = 0x02, + .host_int_status_reg = 0x03, .status_reg_0 = 0x60, .status_reg_1 = 0x61, .sdio_int_mask = 0x3f, .data_port_mask = 0x0000fffe, + .io_port_0_reg = 0x78, + .io_port_1_reg = 0x79, + .io_port_2_reg = 0x7A, .max_mp_regs = 64, .rd_bitmap_l = 0x04, .rd_bitmap_u = 0x05, @@ -296,10 +298,16 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = { .poll_reg = 0x50, .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK | CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK, + .host_int_rsr_reg = 0x1, + .host_int_status_reg = 0x03, + .host_int_mask_reg = 0x02, .status_reg_0 = 0xc0, .status_reg_1 = 0xc1, .sdio_int_mask = 0xff, .data_port_mask = 0xffffffff, + .io_port_0_reg = 0xD8, + .io_port_1_reg = 0xD9, + .io_port_2_reg = 0xDA, .max_mp_regs = 184, .rd_bitmap_l = 0x04, .rd_bitmap_u = 0x05, @@ -312,6 +320,15 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = { .rd_len_p0_l = 0x0c, .rd_len_p0_u = 0x0d, .card_misc_cfg_reg = 0xcc, + .card_cfg_2_1_reg = 0xcd, + .cmd_rd_len_0 = 0xb4, + .cmd_rd_len_1 = 0xb5, + .cmd_rd_len_2 = 0xb6, + .cmd_rd_len_3 = 0xb7, + .cmd_cfg_0 = 0xb8, + .cmd_cfg_1 = 0xb9, + .cmd_cfg_2 = 0xba, + .cmd_cfg_3 = 0xbb, .fw_dump_ctrl = 0xe2, .fw_dump_start = 0xe3, .fw_dump_end = 0xea,