From: Dan Williams Date: Fri, 23 Jul 2010 22:47:56 +0000 (-0700) Subject: ioat2: catch and recover from broken vtd configurations v6 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=556ab45f9a775bfa4762bacc0a4afb5b44b067bc;p=linux-beck.git ioat2: catch and recover from broken vtd configurations v6 On some platforms (MacPro3,1) the BIOS assigns the ioatdma device to the incorrect iommu causing faults when the driver initializes. Add a quirk to catch this misconfiguration and try falling back to untranslated operation (which works in the MacPro3,1 case). Assuming there are other platforms with misconfigured iommus teach the ioatdma driver to treat initialization failures as non-fatal (just fail the driver load and emit a warning instead of triggering a BUG_ON). This can be classified as a boot regression since 2.6.32 on affected platforms since the ioatdma module did not autoload prior to that kernel. Cc: Acked-by: David Woodhouse Reported-by: Chris Li Tested-by: Chris Li Signed-off-by: Dan Williams --- diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 6d3a73b57e54..5216c8a92a21 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -97,6 +97,7 @@ struct ioat_chan_common { #define IOAT_RESET_PENDING 2 #define IOAT_KOBJ_INIT_FAIL 3 #define IOAT_RESHAPE_PENDING 4 + #define IOAT_RUN 5 struct timer_list timer; #define COMPLETION_TIMEOUT msecs_to_jiffies(100) #define IDLE_TIMEOUT msecs_to_jiffies(2000) diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 3c8b32a83794..216f9d383b5b 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -287,7 +287,10 @@ void ioat2_timer_event(unsigned long data) chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); dev_err(to_dev(chan), "%s: Channel halted (%x)\n", __func__, chanerr); - BUG_ON(is_ioat_bug(chanerr)); + if (test_bit(IOAT_RUN, &chan->state)) + BUG_ON(is_ioat_bug(chanerr)); + else /* we never got off the ground */ + return; } /* if we haven't made progress and we have already @@ -492,6 +495,8 @@ static struct ioat_ring_ent **ioat2_alloc_ring(struct dma_chan *c, int order, gf return ring; } +void ioat2_free_chan_resources(struct dma_chan *c); + /* ioat2_alloc_chan_resources - allocate/initialize ioat2 descriptor ring * @chan: channel to be initialized */ @@ -500,6 +505,7 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) struct ioat2_dma_chan *ioat = to_ioat2_chan(c); struct ioat_chan_common *chan = &ioat->base; struct ioat_ring_ent **ring; + u64 status; int order; /* have we already been set up? */ @@ -540,7 +546,20 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) tasklet_enable(&chan->cleanup_task); ioat2_start_null_desc(ioat); - return 1 << ioat->alloc_order; + /* check that we got off the ground */ + udelay(5); + status = ioat_chansts(chan); + if (is_ioat_active(status) || is_ioat_idle(status)) { + set_bit(IOAT_RUN, &chan->state); + return 1 << ioat->alloc_order; + } else { + u32 chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + + dev_WARN(to_dev(chan), + "failed to start channel chanerr: %#x\n", chanerr); + ioat2_free_chan_resources(c); + return -EFAULT; + } } bool reshape_ring(struct ioat2_dma_chan *ioat, int order) @@ -778,6 +797,7 @@ void ioat2_free_chan_resources(struct dma_chan *c) del_timer_sync(&chan->timer); device->cleanup_fn((unsigned long) c); device->reset_hw(chan); + clear_bit(IOAT_RUN, &chan->state); spin_lock_bh(&chan->cleanup_lock); spin_lock_bh(&ioat->prep_lock); diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 1cdd22e1051b..d0f499098479 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -361,7 +361,10 @@ static void ioat3_timer_event(unsigned long data) chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); dev_err(to_dev(chan), "%s: Channel halted (%x)\n", __func__, chanerr); - BUG_ON(is_ioat_bug(chanerr)); + if (test_bit(IOAT_RUN, &chan->state)) + BUG_ON(is_ioat_bug(chanerr)); + else /* we never got off the ground */ + return; } /* if we haven't made progress and we have already diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 796828fce34c..90938c7a74c1 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -3029,6 +3029,34 @@ static void __init iommu_exit_mempool(void) } +static void quirk_ioat_snb_local_iommu(struct pci_dev *pdev) +{ + struct dmar_drhd_unit *drhd; + u32 vtbar; + int rc; + + /* We know that this device on this chipset has its own IOMMU. + * If we find it under a different IOMMU, then the BIOS is lying + * to us. Hope that the IOMMU for this device is actually + * disabled, and it needs no translation... + */ + rc = pci_bus_read_config_dword(pdev->bus, PCI_DEVFN(0, 0), 0xb0, &vtbar); + if (rc) { + /* "can't" happen */ + dev_info(&pdev->dev, "failed to run vt-d quirk\n"); + return; + } + vtbar &= 0xffff0000; + + /* we know that the this iommu should be at offset 0xa000 from vtbar */ + drhd = dmar_find_matched_drhd_unit(pdev); + if (WARN_TAINT_ONCE(!drhd || drhd->reg_base_addr - vtbar != 0xa000, + TAINT_FIRMWARE_WORKAROUND, + "BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n")) + pdev->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO; +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB, quirk_ioat_snb_local_iommu); + static void __init init_no_remapping_devices(void) { struct dmar_drhd_unit *drhd;