From: Ingrid Cheung Date: Sun, 10 Nov 2013 04:02:50 +0000 (-0500) Subject: Staging: bcm: Fix checkpatch warnings for long lines. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5570de180d4a69f582564db82e89b08bfa09a151;p=linux-beck.git Staging: bcm: Fix checkpatch warnings for long lines. Fixes multiple checkpatch warnings for long lines in Bcmchar.c. Signed-off-by: Ingrid Cheung Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c index 2cf64df22938..6385b57572fa 100644 --- a/drivers/staging/bcm/Bcmchar.c +++ b/drivers/staging/bcm/Bcmchar.c @@ -268,7 +268,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) (uiTempVar == EEPROM_REJECT_REG_3) || (uiTempVar == EEPROM_REJECT_REG_4))) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "EEPROM Access Denied, not in VSG Mode\n"); return -EFAULT; } @@ -276,9 +277,11 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) (PUINT)sWrmBuffer.Data, sizeof(ULONG)); if (Status == STATUS_SUCCESS) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Done\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, + DBG_LVL_ALL, "WRM Done\n"); } else { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, + DBG_LVL_ALL, "WRM Failed\n"); Status = -EFAULT; } break; @@ -293,7 +296,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) (Adapter->bShutStatus == TRUE) || (Adapter->bPreparingForLowPowerMode == TRUE)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Rdms\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "Device in Idle Mode, Blocking Rdms\n"); return -EACCES; } @@ -319,7 +323,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) if ((((ULONG)sRdmBuffer.Register & 0x0F000000) != 0x0F000000) || ((ULONG)sRdmBuffer.Register & 0x3)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM Done On invalid Address : %x Access Denied.\n", + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "RDM Done On invalid Address : %x Access Denied.\n", (int)sRdmBuffer.Register); kfree(temp_buff); @@ -327,7 +332,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) } uiTempVar = sRdmBuffer.Register & EEPROM_REJECT_MASK; - bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register, (PUINT)temp_buff, IoBuffer.OutputLength); + bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register, + (PUINT)temp_buff, IoBuffer.OutputLength); if (bytes > 0) { Status = STATUS_SUCCESS; @@ -351,7 +357,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) (Adapter->bShutStatus == TRUE) || (Adapter->bPreparingForLowPowerMode == TRUE)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Device in Idle Mode, Blocking Wrms\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "Device in Idle Mode, Blocking Wrms\n"); return -EACCES; } @@ -369,7 +376,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) if ((((ULONG)sWrmBuffer.Register & 0x0F000000) != 0x0F000000) || ((ULONG)sWrmBuffer.Register & 0x3)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Done On invalid Address : %x Access Denied.\n", (int)sWrmBuffer.Register); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "WRM Done On invalid Address : %x Access Denied.\n", + (int)sWrmBuffer.Register); return -EINVAL; } @@ -381,17 +390,21 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) (uiTempVar == EEPROM_REJECT_REG_4)) && (cmd == IOCTL_BCM_REGISTER_WRITE)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "EEPROM Access Denied, not in VSG Mode\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "EEPROM Access Denied, not in VSG Mode\n"); return -EFAULT; } Status = wrmaltWithLock(Adapter, (UINT)sWrmBuffer.Register, - (PUINT)sWrmBuffer.Data, sWrmBuffer.Length); + (PUINT)sWrmBuffer.Data, + sWrmBuffer.Length); if (Status == STATUS_SUCCESS) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, "WRM Done\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, + DBG_LVL_ALL, "WRM Done\n"); } else { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "WRM Failed\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, + DBG_LVL_ALL, "WRM Failed\n"); Status = -EFAULT; } break; @@ -407,7 +420,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) (Adapter->bShutStatus == TRUE) || (Adapter->bPreparingForLowPowerMode == TRUE)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "GPIO Can't be set/clear in Low power Mode"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, + DBG_LVL_ALL, + "GPIO Can't be set/clear in Low power Mode"); return -EACCES; } @@ -425,7 +440,10 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) value = (1< is not correspond to LED !!!", value); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, + DBG_LVL_ALL, + "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!", + value); Status = -EINVAL; break; } @@ -433,27 +451,42 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) /* Set - setting 1 */ if (uiOperation) { /* Set the gpio output register */ - Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, (PUINT)(&value), sizeof(UINT)); + Status = wrmaltWithLock(Adapter, + BCM_GPIO_OUTPUT_SET_REG, + (PUINT)(&value), sizeof(UINT)); if (Status == STATUS_SUCCESS) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO bit\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + OSAL_DBG, DBG_LVL_ALL, + "Set the GPIO bit\n"); } else { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to set the %dth GPIO\n", uiBit); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + OSAL_DBG, DBG_LVL_ALL, + "Failed to set the %dth GPIO\n", + uiBit); break; } } else { /* Set the gpio output register */ - Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)(&value), sizeof(UINT)); + Status = wrmaltWithLock(Adapter, + BCM_GPIO_OUTPUT_CLR_REG, + (PUINT)(&value), sizeof(UINT)); if (Status == STATUS_SUCCESS) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO bit\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + OSAL_DBG, DBG_LVL_ALL, + "Set the GPIO bit\n"); } else { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to clear the %dth GPIO\n", uiBit); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + OSAL_DBG, DBG_LVL_ALL, + "Failed to clear the %dth GPIO\n", + uiBit); break; } } - bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, (PUINT)ucResetValue, sizeof(UINT)); + bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, + (PUINT)ucResetValue, sizeof(UINT)); if (bytes < 0) { Status = bytes; BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, @@ -469,9 +502,13 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) (PUINT)ucResetValue, sizeof(UINT)); if (Status == STATUS_SUCCESS) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Set the GPIO to output Mode\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, + DBG_LVL_ALL, + "Set the GPIO to output Mode\n"); } else { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Failed to put GPIO in Output Mode\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, + DBG_LVL_ALL, + "Failed to put GPIO in Output Mode\n"); break; } } @@ -479,13 +516,16 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) case BCM_LED_THREAD_STATE_CHANGE_REQ: { struct bcm_user_thread_req threadReq = {0}; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "User made LED thread InActive"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, + "User made LED thread InActive"); if ((Adapter->IdleMode == TRUE) || (Adapter->bShutStatus == TRUE) || (Adapter->bPreparingForLowPowerMode == TRUE)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "GPIO Can't be set/clear in Low power Mode"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, + DBG_LVL_ALL, + "GPIO Can't be set/clear in Low power Mode"); Status = -EACCES; break; } @@ -502,10 +542,14 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) /* if LED thread is running(Actively or Inactively) set it state to make inactive */ if (Adapter->LEDInfo.led_thread_running) { if (threadReq.ThreadState == LED_THREAD_ACTIVATION_REQ) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Activating thread req"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + OSAL_DBG, DBG_LVL_ALL, + "Activating thread req"); Adapter->DriverState = LED_THREAD_ACTIVE; } else { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "DeActivating Thread req....."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + OSAL_DBG, DBG_LVL_ALL, + "DeActivating Thread req....."); Adapter->DriverState = LED_THREAD_INACTIVE; } @@ -542,7 +586,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) if (bytes < 0) { Status = bytes; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM Failed\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "RDM Failed\n"); return Status; } else { Status = STATUS_SUCCESS; @@ -572,9 +617,11 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) return -EFAULT; if (IsReqGpioIsLedInNVM(Adapter, pgpio_multi_info[WIMAX_IDX].uiGPIOMask) == false) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, + DBG_LVL_ALL, "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!", - pgpio_multi_info[WIMAX_IDX].uiGPIOMask, Adapter->gpioBitMap); + pgpio_multi_info[WIMAX_IDX].uiGPIOMask, + Adapter->gpioBitMap); Status = -EINVAL; break; } @@ -592,7 +639,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) (PUINT)ucResetValue, sizeof(ULONG)); if (Status != STATUS_SUCCESS) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to BCM_GPIO_OUTPUT_SET_REG Failed."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "WRM to BCM_GPIO_OUTPUT_SET_REG Failed."); return Status; } @@ -605,7 +653,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) Status = wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, (PUINT)ucResetValue, sizeof(ULONG)); if (Status != STATUS_SUCCESS) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to BCM_GPIO_OUTPUT_CLR_REG Failed."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "WRM to BCM_GPIO_OUTPUT_CLR_REG Failed."); return Status; } } @@ -615,7 +664,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) if (bytes < 0) { Status = bytes; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM to GPIO_PIN_STATE_REGISTER Failed."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, + "RDM to GPIO_PIN_STATE_REGISTER Failed."); return Status; } else { Status = STATUS_SUCCESS;