From: Guennadi Liakhovetski Date: Thu, 21 Mar 2013 16:05:40 +0000 (+0100) Subject: ARM: shmobile: sh73a0: add irqpin DT nodes X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=558f874029c904ca694a69e96b4b48c4d54686a3;p=linux-beck.git ARM: shmobile: sh73a0: add irqpin DT nodes Add DT nodes for the 4 irqpin interrupt controllers on sh73a0. We add them to sh73a0.dtsi, which is also used by configurations, doing all their device instantiation from board the .c code. We rely on the fact, that such configurations don't instantiate devices from the device-tree. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Simon Horman --- diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 8a59465d0231..7e71e3a85767 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -38,6 +38,87 @@ <0xf0000100 0x100>; }; + irqpin0: irqpin@e6900000 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900000 4>, + <0xe6900010 4>, + <0xe6900020 1>, + <0xe6900040 1>, + <0xe6900060 1>; + interrupt-parent = <&gic>; + interrupts = <0 1 0x4 + 0 2 0x4 + 0 3 0x4 + 0 4 0x4 + 0 5 0x4 + 0 6 0x4 + 0 7 0x4 + 0 8 0x4>; + }; + + irqpin1: irqpin@e6900004 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupt-parent = <&gic>; + interrupts = <0 9 0x4 + 0 10 0x4 + 0 11 0x4 + 0 12 0x4 + 0 13 0x4 + 0 14 0x4 + 0 15 0x4 + 0 16 0x4>; + control-parent; + }; + + irqpin2: irqpin@e6900008 { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900008 4>, + <0xe6900018 4>, + <0xe6900028 1>, + <0xe6900048 1>, + <0xe6900068 1>; + interrupt-parent = <&gic>; + interrupts = <0 17 0x4 + 0 18 0x4 + 0 19 0x4 + 0 20 0x4 + 0 21 0x4 + 0 22 0x4 + 0 23 0x4 + 0 24 0x4>; + }; + + irqpin3: irqpin@e690000c { + compatible = "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe690000c 4>, + <0xe690001c 4>, + <0xe690002c 1>, + <0xe690004c 1>, + <0xe690006c 1>; + interrupt-parent = <&gic>; + interrupts = <0 25 0x4 + 0 26 0x4 + 0 27 0x4 + 0 28 0x4 + 0 29 0x4 + 0 30 0x4 + 0 31 0x4 + 0 32 0x4>; + }; + i2c0: i2c@0xe6820000 { #address-cells = <1>; #size-cells = <0>;