From: Istvan Varga Date: Fri, 3 Jun 2011 15:23:33 +0000 (-0300) Subject: [media] xc4000: added mutex X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5614942bb06f5620d0d6eb67bc0268c76c5dd921;p=mv-sheeva.git [media] xc4000: added mutex This patch adds a mutex to xc4000_priv, to protect the driver from being accessed by multiple processes at the same time. Signed-off-by: Istvan Varga Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/common/tuners/xc4000.c b/drivers/media/common/tuners/xc4000.c index 307a8745e06..be43a6dfac6 100644 --- a/drivers/media/common/tuners/xc4000.c +++ b/drivers/media/common/tuners/xc4000.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include "dvb_frontend.h" @@ -90,6 +91,7 @@ struct xc4000_priv { struct firmware_properties cur_fw; __u16 hwmodel; __u16 hwvers; + struct mutex lock; }; /* Misc Defines */ @@ -1145,10 +1147,12 @@ static int xc4000_set_params(struct dvb_frontend *fe, { struct xc4000_priv *priv = fe->tuner_priv; unsigned int type; - int ret; + int ret = -EREMOTEIO; dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency); + mutex_lock(&priv->lock); + if (fe->ops.info.type == FE_ATSC) { dprintk(1, "%s() ATSC\n", __func__); switch (params->u.vsb.modulation) { @@ -1172,7 +1176,8 @@ static int xc4000_set_params(struct dvb_frontend *fe, type = DTV6; break; default: - return -EINVAL; + ret = -EINVAL; + goto fail; } } else if (fe->ops.info.type == FE_OFDM) { dprintk(1, "%s() OFDM\n", __func__); @@ -1208,28 +1213,29 @@ static int xc4000_set_params(struct dvb_frontend *fe, break; default: printk(KERN_ERR "xc4000 bandwidth not set!\n"); - return -EINVAL; + ret = -EINVAL; + goto fail; } priv->rf_mode = XC_RF_MODE_AIR; } else { printk(KERN_ERR "xc4000 modulation type not supported!\n"); - return -EINVAL; + ret = -EINVAL; + goto fail; } dprintk(1, "%s() frequency=%d (compensated)\n", __func__, priv->freq_hz); /* Make sure the correct firmware type is loaded */ - if (check_firmware(fe, type, 0, priv->if_khz) != XC_RESULT_SUCCESS) { - return -EREMOTEIO; - } + if (check_firmware(fe, type, 0, priv->if_khz) != XC_RESULT_SUCCESS) + goto fail; ret = xc_SetSignalSource(priv, priv->rf_mode); if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR - "xc4000: xc_SetSignalSource(%d) failed\n", - priv->rf_mode); - return -EREMOTEIO; + "xc4000: xc_SetSignalSource(%d) failed\n", + priv->rf_mode); + goto fail; } ret = xc_SetTVStandard(priv, @@ -1237,33 +1243,32 @@ static int xc4000_set_params(struct dvb_frontend *fe, XC4000_Standard[priv->video_standard].AudioMode); if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc4000: xc_SetTVStandard failed\n"); - return -EREMOTEIO; - } -#ifdef DJH_DEBUG - ret = xc_set_IF_frequency(priv, priv->if_khz); - if (ret != XC_RESULT_SUCCESS) { - printk(KERN_ERR "xc4000: xc_Set_IF_frequency(%d) failed\n", - priv->if_khz); - return -EIO; + goto fail; } -#endif xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL); if (debug) xc_debug_dump(priv); - return 0; + ret = 0; + +fail: + mutex_unlock(&priv->lock); + + return ret; } static int xc4000_set_analog_params(struct dvb_frontend *fe, struct analog_parameters *params) { struct xc4000_priv *priv = fe->tuner_priv; - int ret; + int ret = -EREMOTEIO; dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", __func__, params->frequency); + mutex_lock(&priv->lock); + /* Fix me: it could be air. */ priv->rf_mode = params->mode; if (params->mode > XC_RF_MODE_CABLE) @@ -1318,16 +1323,15 @@ static int xc4000_set_analog_params(struct dvb_frontend *fe, tune_channel: /* FIXME - firmware type not being set properly */ - if (check_firmware(fe, DTV8, 0, priv->if_khz) != XC_RESULT_SUCCESS) { - return -EREMOTEIO; - } + if (check_firmware(fe, DTV8, 0, priv->if_khz) != XC_RESULT_SUCCESS) + goto fail; ret = xc_SetSignalSource(priv, priv->rf_mode); if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR - "xc4000: xc_SetSignalSource(%d) failed\n", - priv->rf_mode); - return -EREMOTEIO; + "xc4000: xc_SetSignalSource(%d) failed\n", + priv->rf_mode); + goto fail; } ret = xc_SetTVStandard(priv, @@ -1335,7 +1339,7 @@ tune_channel: XC4000_Standard[priv->video_standard].AudioMode); if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc4000: xc_SetTVStandard failed\n"); - return -EREMOTEIO; + goto fail; } xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG); @@ -1343,7 +1347,12 @@ tune_channel: if (debug) xc_debug_dump(priv); - return 0; + ret = 0; + +fail: + mutex_unlock(&priv->lock); + + return ret; } static int xc4000_get_frequency(struct dvb_frontend *fe, u32 *freq) @@ -1368,8 +1377,12 @@ static int xc4000_get_status(struct dvb_frontend *fe, u32 *status) struct xc4000_priv *priv = fe->tuner_priv; u16 lock_status = 0; + mutex_lock(&priv->lock); + xc_get_lock_status(priv, &lock_status); + mutex_unlock(&priv->lock); + dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status); *status = lock_status; @@ -1386,9 +1399,13 @@ static int xc4000_sleep(struct dvb_frontend *fe) static int xc4000_init(struct dvb_frontend *fe) { struct xc4000_priv *priv = fe->tuner_priv; + int ret; dprintk(1, "%s()\n", __func__); - if (check_firmware(fe, DTV8, 0, priv->if_khz) != XC_RESULT_SUCCESS) { + mutex_lock(&priv->lock); + ret = check_firmware(fe, DTV8, 0, priv->if_khz); + mutex_unlock(&priv->lock); + if (ret != XC_RESULT_SUCCESS) { printk(KERN_ERR "xc4000: Unable to initialise tuner\n"); return -EREMOTEIO; } @@ -1460,6 +1477,7 @@ struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe, case 1: /* new tuner instance */ priv->bandwidth = BANDWIDTH_6_MHZ; + mutex_init(&priv->lock); fe->tuner_priv = priv; break; default: @@ -1511,7 +1529,9 @@ struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe, /* FIXME: For now, load the firmware at startup. We will remove this before the code goes to production... */ + mutex_lock(&priv->lock); check_firmware(fe, DTV8, 0, priv->if_khz); + mutex_unlock(&priv->lock); return fe; fail: