From: Mark Einon Date: Thu, 20 Oct 2011 00:18:37 +0000 (+0100) Subject: staging: et131x: move et1310_rx.h contents into et131x.c X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=562550b02bbe9e376b05c5ff7d7ef12e7c32fc30;p=linux-beck.git staging: et131x: move et1310_rx.h contents into et131x.c Move et1310_rx.h contents into et131x.c and delete et1310_rx.h Signed-off-by: Mark Einon Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/et131x/et1310_rx.h b/drivers/staging/et131x/et1310_rx.h deleted file mode 100644 index b3b1bc959d19..000000000000 --- a/drivers/staging/et131x/et1310_rx.h +++ /dev/null @@ -1,243 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - * Copyright (c) 2011 Mark Einon - * - *------------------------------------------------------------------------------ - * - * et1310_rx.h - Defines, structs, enums, prototypes, etc. pertaining to data - * reception. - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#ifndef __ET1310_RX_H__ -#define __ET1310_RX_H__ - -#define USE_FBR0 true - -#ifdef USE_FBR0 -/* #define FBR0_BUFFER_SIZE 256 */ -#endif - -/* #define FBR1_BUFFER_SIZE 2048 */ - -#define FBR_CHUNKS 32 - -#define MAX_DESC_PER_RING_RX 1024 - -/* number of RFDs - default and min */ -#ifdef USE_FBR0 -#define RFD_LOW_WATER_MARK 40 -#define NIC_MIN_NUM_RFD 64 -#define NIC_DEFAULT_NUM_RFD 1024 -#else -#define RFD_LOW_WATER_MARK 20 -#define NIC_MIN_NUM_RFD 64 -#define NIC_DEFAULT_NUM_RFD 256 -#endif - -#define NUM_PACKETS_HANDLED 256 - -#define ALCATEL_BAD_STATUS 0xe47f0000 -#define ALCATEL_MULTICAST_PKT 0x01000000 -#define ALCATEL_BROADCAST_PKT 0x02000000 - -/* typedefs for Free Buffer Descriptors */ -struct fbr_desc { - u32 addr_lo; - u32 addr_hi; - u32 word2; /* Bits 10-31 reserved, 0-9 descriptor */ -}; - -/* Packet Status Ring Descriptors - * - * Word 0: - * - * top 16 bits are from the Alcatel Status Word as enumerated in - * PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2) - * - * 0: hp hash pass - * 1: ipa IP checksum assist - * 2: ipp IP checksum pass - * 3: tcpa TCP checksum assist - * 4: tcpp TCP checksum pass - * 5: wol WOL Event - * 6: rxmac_error RXMAC Error Indicator - * 7: drop Drop packet - * 8: ft Frame Truncated - * 9: jp Jumbo Packet - * 10: vp VLAN Packet - * 11-15: unused - * 16: asw_prev_pkt_dropped e.g. IFG too small on previous - * 17: asw_RX_DV_event short receive event detected - * 18: asw_false_carrier_event bad carrier since last good packet - * 19: asw_code_err one or more nibbles signalled as errors - * 20: asw_CRC_err CRC error - * 21: asw_len_chk_err frame length field incorrect - * 22: asw_too_long frame length > 1518 bytes - * 23: asw_OK valid CRC + no code error - * 24: asw_multicast has a multicast address - * 25: asw_broadcast has a broadcast address - * 26: asw_dribble_nibble spurious bits after EOP - * 27: asw_control_frame is a control frame - * 28: asw_pause_frame is a pause frame - * 29: asw_unsupported_op unsupported OP code - * 30: asw_VLAN_tag VLAN tag detected - * 31: asw_long_evt Rx long event - * - * Word 1: - * 0-15: length length in bytes - * 16-25: bi Buffer Index - * 26-27: ri Ring Index - * 28-31: reserved - */ - -struct pkt_stat_desc { - u32 word0; - u32 word1; -}; - -/* Typedefs for the RX DMA status word */ - -/* - * rx status word 0 holds part of the status bits of the Rx DMA engine - * that get copied out to memory by the ET-1310. Word 0 is a 32 bit word - * which contains the Free Buffer ring 0 and 1 available offset. - * - * bit 0-9 FBR1 offset - * bit 10 Wrap flag for FBR1 - * bit 16-25 FBR0 offset - * bit 26 Wrap flag for FBR0 - */ - -/* - * RXSTAT_WORD1_t structure holds part of the status bits of the Rx DMA engine - * that get copied out to memory by the ET-1310. Word 3 is a 32 bit word - * which contains the Packet Status Ring available offset. - * - * bit 0-15 reserved - * bit 16-27 PSRoffset - * bit 28 PSRwrap - * bit 29-31 unused - */ - -/* - * struct rx_status_block is a structure representing the status of the Rx - * DMA engine it sits in free memory, and is pointed to by 0x101c / 0x1020 - */ -struct rx_status_block { - u32 word0; - u32 word1; -}; - -/* - * Structure for look-up table holding free buffer ring pointers - */ -struct fbr_lookup { - void *virt[MAX_DESC_PER_RING_RX]; - void *buffer1[MAX_DESC_PER_RING_RX]; - void *buffer2[MAX_DESC_PER_RING_RX]; - u32 bus_high[MAX_DESC_PER_RING_RX]; - u32 bus_low[MAX_DESC_PER_RING_RX]; -}; - -/* - * struct rx_ring is the sructure representing the adaptor's local - * reference(s) to the rings - */ -struct rx_ring { -#ifdef USE_FBR0 - void *fbr0_ring_virtaddr; - dma_addr_t fbr0_ring_physaddr; - void *fbr0_mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - dma_addr_t fbr0_mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - uint64_t fbr0_real_physaddr; - uint64_t fbr0_offset; - u32 local_fbr0_full; - u32 fbr0_num_entries; - u32 fbr0_buffsize; -#endif - void *fbr1_ring_virtaddr; - dma_addr_t fbr1_ring_physaddr; - void *fbr1_mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - dma_addr_t fbr1_mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; - uint64_t fbr1_real_physaddr; - uint64_t fbr1_offset; - struct fbr_lookup *fbr[2]; /* One per ring */ - u32 local_fbr1_full; - u32 fbr1_num_entries; - u32 fbr1_buffsize; - - void *ps_ring_virtaddr; - dma_addr_t ps_ring_physaddr; - u32 local_psr_full; - u32 psr_num_entries; - - struct rx_status_block *rx_status_block; - dma_addr_t rx_status_bus; - - struct list_head recv_buff_pool; - - /* RECV */ - struct list_head recv_list; - u32 num_ready_recv; - - u32 num_rfd; - - bool unfinished_receives; - - struct list_head recv_packet_pool; - - /* lookaside lists */ - struct kmem_cache *recv_lookaside; -}; - -#endif /* __ET1310_RX_H__ */ diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index 402ab7f7ae27..484a626a81fa 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -82,7 +82,6 @@ #include #include "et1310_tx.h" -#include "et1310_rx.h" #include "et131x.h" MODULE_AUTHOR("Victor Soriano "); @@ -186,6 +185,186 @@ MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver " #define PARM_TX_NUM_BUFS_DEF 4 #define PARM_DMA_CACHE_DEF 0 +/* RX defines */ +#define USE_FBR0 true + +#ifdef USE_FBR0 +/* #define FBR0_BUFFER_SIZE 256 */ +#endif + +/* #define FBR1_BUFFER_SIZE 2048 */ + +#define FBR_CHUNKS 32 + +#define MAX_DESC_PER_RING_RX 1024 + +/* number of RFDs - default and min */ +#ifdef USE_FBR0 +#define RFD_LOW_WATER_MARK 40 +#define NIC_MIN_NUM_RFD 64 +#define NIC_DEFAULT_NUM_RFD 1024 +#else +#define RFD_LOW_WATER_MARK 20 +#define NIC_MIN_NUM_RFD 64 +#define NIC_DEFAULT_NUM_RFD 256 +#endif + +#define NUM_PACKETS_HANDLED 256 + +#define ALCATEL_BAD_STATUS 0xe47f0000 +#define ALCATEL_MULTICAST_PKT 0x01000000 +#define ALCATEL_BROADCAST_PKT 0x02000000 + +/* typedefs for Free Buffer Descriptors */ +struct fbr_desc { + u32 addr_lo; + u32 addr_hi; + u32 word2; /* Bits 10-31 reserved, 0-9 descriptor */ +}; + +/* Packet Status Ring Descriptors + * + * Word 0: + * + * top 16 bits are from the Alcatel Status Word as enumerated in + * PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2) + * + * 0: hp hash pass + * 1: ipa IP checksum assist + * 2: ipp IP checksum pass + * 3: tcpa TCP checksum assist + * 4: tcpp TCP checksum pass + * 5: wol WOL Event + * 6: rxmac_error RXMAC Error Indicator + * 7: drop Drop packet + * 8: ft Frame Truncated + * 9: jp Jumbo Packet + * 10: vp VLAN Packet + * 11-15: unused + * 16: asw_prev_pkt_dropped e.g. IFG too small on previous + * 17: asw_RX_DV_event short receive event detected + * 18: asw_false_carrier_event bad carrier since last good packet + * 19: asw_code_err one or more nibbles signalled as errors + * 20: asw_CRC_err CRC error + * 21: asw_len_chk_err frame length field incorrect + * 22: asw_too_long frame length > 1518 bytes + * 23: asw_OK valid CRC + no code error + * 24: asw_multicast has a multicast address + * 25: asw_broadcast has a broadcast address + * 26: asw_dribble_nibble spurious bits after EOP + * 27: asw_control_frame is a control frame + * 28: asw_pause_frame is a pause frame + * 29: asw_unsupported_op unsupported OP code + * 30: asw_VLAN_tag VLAN tag detected + * 31: asw_long_evt Rx long event + * + * Word 1: + * 0-15: length length in bytes + * 16-25: bi Buffer Index + * 26-27: ri Ring Index + * 28-31: reserved + */ + +struct pkt_stat_desc { + u32 word0; + u32 word1; +}; + +/* Typedefs for the RX DMA status word */ + +/* + * rx status word 0 holds part of the status bits of the Rx DMA engine + * that get copied out to memory by the ET-1310. Word 0 is a 32 bit word + * which contains the Free Buffer ring 0 and 1 available offset. + * + * bit 0-9 FBR1 offset + * bit 10 Wrap flag for FBR1 + * bit 16-25 FBR0 offset + * bit 26 Wrap flag for FBR0 + */ + +/* + * RXSTAT_WORD1_t structure holds part of the status bits of the Rx DMA engine + * that get copied out to memory by the ET-1310. Word 3 is a 32 bit word + * which contains the Packet Status Ring available offset. + * + * bit 0-15 reserved + * bit 16-27 PSRoffset + * bit 28 PSRwrap + * bit 29-31 unused + */ + +/* + * struct rx_status_block is a structure representing the status of the Rx + * DMA engine it sits in free memory, and is pointed to by 0x101c / 0x1020 + */ +struct rx_status_block { + u32 word0; + u32 word1; +}; + +/* + * Structure for look-up table holding free buffer ring pointers + */ +struct fbr_lookup { + void *virt[MAX_DESC_PER_RING_RX]; + void *buffer1[MAX_DESC_PER_RING_RX]; + void *buffer2[MAX_DESC_PER_RING_RX]; + u32 bus_high[MAX_DESC_PER_RING_RX]; + u32 bus_low[MAX_DESC_PER_RING_RX]; +}; + +/* + * struct rx_ring is the sructure representing the adaptor's local + * reference(s) to the rings + */ +struct rx_ring { +#ifdef USE_FBR0 + void *fbr0_ring_virtaddr; + dma_addr_t fbr0_ring_physaddr; + void *fbr0_mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + dma_addr_t fbr0_mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + uint64_t fbr0_real_physaddr; + uint64_t fbr0_offset; + u32 local_fbr0_full; + u32 fbr0_num_entries; + u32 fbr0_buffsize; +#endif + void *fbr1_ring_virtaddr; + dma_addr_t fbr1_ring_physaddr; + void *fbr1_mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + dma_addr_t fbr1_mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS]; + uint64_t fbr1_real_physaddr; + uint64_t fbr1_offset; + struct fbr_lookup *fbr[2]; /* One per ring */ + u32 local_fbr1_full; + u32 fbr1_num_entries; + u32 fbr1_buffsize; + + void *ps_ring_virtaddr; + dma_addr_t ps_ring_physaddr; + u32 local_psr_full; + u32 psr_num_entries; + + struct rx_status_block *rx_status_block; + dma_addr_t rx_status_bus; + + struct list_head recv_buff_pool; + + /* RECV */ + struct list_head recv_list; + u32 num_ready_recv; + + u32 num_rfd; + + bool unfinished_receives; + + struct list_head recv_packet_pool; + + /* lookaside lists */ + struct kmem_cache *recv_lookaside; +}; + /* ADAPTER defines */ /* * Do not change these values: if changed, then change also in respective