From: Amir Vadai Date: Wed, 4 Apr 2012 21:33:26 +0000 (+0000) Subject: net/mlx4_en: DCB QoS support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=564c274c3df07d727fbe23684dc3077a9dd30607;p=linux-beck.git net/mlx4_en: DCB QoS support Set TSA, promised BW and PFC using IEEE 802.1qaz netlink commands. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/mellanox/mlx4/Kconfig b/drivers/net/ethernet/mellanox/mlx4/Kconfig index 1bb93531f1ba..5f027f95cc84 100644 --- a/drivers/net/ethernet/mellanox/mlx4/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig @@ -11,6 +11,18 @@ config MLX4_EN This driver supports Mellanox Technologies ConnectX Ethernet devices. +config MLX4_EN_DCB + bool "Data Center Bridging (DCB) Support" + default y + depends on MLX4_EN && DCB + ---help--- + Say Y here if you want to use Data Center Bridging (DCB) in the + driver. + If set to N, will not be able to configure QoS and ratelimit attributes. + This flag is depended on the kernel's DCB support. + + If unsure, set to Y + config MLX4_CORE tristate depends on PCI diff --git a/drivers/net/ethernet/mellanox/mlx4/Makefile b/drivers/net/ethernet/mellanox/mlx4/Makefile index 4a40ab967eeb..293127d28b33 100644 --- a/drivers/net/ethernet/mellanox/mlx4/Makefile +++ b/drivers/net/ethernet/mellanox/mlx4/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_MLX4_EN) += mlx4_en.o mlx4_en-y := en_main.o en_tx.o en_rx.o en_ethtool.o en_port.o en_cq.o \ en_resources.o en_netdev.o en_selftest.o +mlx4_en-$(CONFIG_MLX4_EN_DCB) += en_dcb_nl.o diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c new file mode 100644 index 000000000000..6892320adaf7 --- /dev/null +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -0,0 +1,209 @@ +/* + * Copyright (c) 2011 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include + +#include "mlx4_en.h" + +static int mlx4_en_dcbnl_ieee_getets(struct net_device *dev, + struct ieee_ets *ets) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct ieee_ets *my_ets = &priv->ets; + + /* No IEEE PFC settings available */ + if (!my_ets) + return -EINVAL; + + ets->ets_cap = IEEE_8021QAZ_MAX_TCS; + ets->cbs = my_ets->cbs; + memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw)); + memcpy(ets->tc_tsa, my_ets->tc_tsa, sizeof(ets->tc_tsa)); + memcpy(ets->prio_tc, my_ets->prio_tc, sizeof(ets->prio_tc)); + + return 0; +} + +static int mlx4_en_ets_validate(struct mlx4_en_priv *priv, struct ieee_ets *ets) +{ + int i; + int total_ets_bw = 0; + int has_ets_tc = 0; + + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + if (ets->prio_tc[i] > MLX4_EN_NUM_UP) { + en_err(priv, "Bad priority in UP <=> TC mapping. TC: %d, UP: %d\n", + i, ets->prio_tc[i]); + return -EINVAL; + } + + switch (ets->tc_tsa[i]) { + case IEEE_8021QAZ_TSA_STRICT: + break; + case IEEE_8021QAZ_TSA_ETS: + has_ets_tc = 1; + total_ets_bw += ets->tc_tx_bw[i]; + break; + default: + en_err(priv, "TC[%d]: Not supported TSA: %d\n", + i, ets->tc_tsa[i]); + return -ENOTSUPP; + } + } + + if (has_ets_tc && total_ets_bw != MLX4_EN_BW_MAX) { + en_err(priv, "Bad ETS BW sum: %d. Should be exactly 100%%\n", + total_ets_bw); + return -EINVAL; + } + + return 0; +} + +static int mlx4_en_config_port_scheduler(struct mlx4_en_priv *priv, + struct ieee_ets *ets, u16 *ratelimit) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int num_strict = 0; + int i; + __u8 tc_tx_bw[IEEE_8021QAZ_MAX_TCS] = { 0 }; + __u8 pg[IEEE_8021QAZ_MAX_TCS] = { 0 }; + + ets = ets ?: &priv->ets; + + /* higher TC means higher priority => lower pg */ + for (i = IEEE_8021QAZ_MAX_TCS - 1; i >= 0; i--) { + switch (ets->tc_tsa[i]) { + case IEEE_8021QAZ_TSA_STRICT: + pg[i] = num_strict++; + tc_tx_bw[i] = MLX4_EN_BW_MAX; + break; + case IEEE_8021QAZ_TSA_ETS: + pg[i] = MLX4_EN_TC_ETS; + tc_tx_bw[i] = ets->tc_tx_bw[i] ?: MLX4_EN_BW_MIN; + break; + } + } + + return mlx4_SET_PORT_SCHEDULER(mdev->dev, priv->port, tc_tx_bw, pg, + ratelimit); +} + +static int +mlx4_en_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + err = mlx4_en_ets_validate(priv, ets); + if (err) + return err; + + err = mlx4_SET_PORT_PRIO2TC(mdev->dev, priv->port, ets->prio_tc); + if (err) + return err; + + err = mlx4_en_config_port_scheduler(priv, ets, NULL); + if (err) + return err; + + memcpy(&priv->ets, ets, sizeof(priv->ets)); + + return 0; +} + +static int mlx4_en_dcbnl_ieee_getpfc(struct net_device *dev, + struct ieee_pfc *pfc) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS; + pfc->pfc_en = priv->prof->tx_ppp; + + return 0; +} + +static int mlx4_en_dcbnl_ieee_setpfc(struct net_device *dev, + struct ieee_pfc *pfc) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + en_dbg(DRV, priv, "cap: 0x%x en: 0x%x mbc: 0x%x delay: %d\n", + pfc->pfc_cap, + pfc->pfc_en, + pfc->mbc, + pfc->delay); + + priv->prof->rx_pause = priv->prof->tx_pause = !!pfc->pfc_en; + priv->prof->rx_ppp = priv->prof->tx_ppp = pfc->pfc_en; + + err = mlx4_SET_PORT_general(mdev->dev, priv->port, + priv->rx_skb_size + ETH_FCS_LEN, + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); + if (err) + en_err(priv, "Failed setting pause params\n"); + + return err; +} + +static u8 mlx4_en_dcbnl_getdcbx(struct net_device *dev) +{ + return DCB_CAP_DCBX_VER_IEEE; +} + +static u8 mlx4_en_dcbnl_setdcbx(struct net_device *dev, u8 mode) +{ + if ((mode & DCB_CAP_DCBX_LLD_MANAGED) || + (mode & DCB_CAP_DCBX_VER_CEE) || + !(mode & DCB_CAP_DCBX_VER_IEEE) || + !(mode & DCB_CAP_DCBX_HOST)) + return 1; + + return 0; +} + +const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops = { + .ieee_getets = mlx4_en_dcbnl_ieee_getets, + .ieee_setets = mlx4_en_dcbnl_ieee_setets, + .ieee_getpfc = mlx4_en_dcbnl_ieee_getpfc, + .ieee_setpfc = mlx4_en_dcbnl_ieee_setpfc, + + .getdcbx = mlx4_en_dcbnl_getdcbx, + .setdcbx = mlx4_en_dcbnl_setdcbx, +}; diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 2322622b6098..107f00553bd3 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -967,6 +967,7 @@ void mlx4_en_destroy_netdev(struct net_device *dev) mutex_unlock(&mdev->state_lock); mlx4_en_free_resources(priv); + free_netdev(dev); } @@ -1080,6 +1081,10 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, INIT_WORK(&priv->watchdog_task, mlx4_en_restart); INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate); INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats); +#ifdef CONFIG_MLX4_EN_DCB + if (!mlx4_is_slave(priv->mdev->dev)) + dev->dcbnl_ops = &mlx4_en_dcbnl_ops; +#endif /* Query for default mac and max mtu */ priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port]; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 5bd7c2a3823e..97d4f3540f6e 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -40,6 +40,9 @@ #include #include #include +#ifdef CONFIG_MLX4_EN_DCB +#include +#endif #include #include @@ -110,6 +113,7 @@ enum { #define MLX4_EN_NUM_TX_RINGS 8 #define MLX4_EN_NUM_PPP_RINGS 8 #define MAX_TX_RINGS (MLX4_EN_NUM_TX_RINGS + MLX4_EN_NUM_PPP_RINGS) +#define MLX4_EN_NUM_UP 8 #define MLX4_EN_DEF_TX_RING_SIZE 512 #define MLX4_EN_DEF_RX_RING_SIZE 1024 @@ -410,6 +414,15 @@ struct mlx4_en_frag_info { }; +#ifdef CONFIG_MLX4_EN_DCB +/* Minimal TC BW - setting to 0 will block traffic */ +#define MLX4_EN_BW_MIN 1 +#define MLX4_EN_BW_MAX 100 /* Utilize 100% of the line */ + +#define MLX4_EN_TC_ETS 7 + +#endif + struct mlx4_en_priv { struct mlx4_en_dev *mdev; struct mlx4_en_port_profile *prof; @@ -483,6 +496,10 @@ struct mlx4_en_priv { int vids[128]; bool wol; struct device *ddev; + +#ifdef CONFIG_MLX4_EN_DCB + struct ieee_ets ets; +#endif }; enum mlx4_en_wol { @@ -557,6 +574,10 @@ int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, struct mlx4_en_priv *priv); int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset); int mlx4_en_QUERY_PORT(struct mlx4_en_dev *mdev, u8 port); +#ifdef CONFIG_MLX4_EN_DCB +extern const struct dcbnl_rtnl_ops mlx4_en_dcbnl_ops; +#endif + #define MLX4_EN_NUM_SELF_TEST 5 void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf); u64 mlx4_en_mac_to_u64(u8 *addr);