From: Alexander Koch Date: Sat, 16 Jan 2016 16:14:36 +0000 (+0100) Subject: iio: light: opt3001: extract int. time constants X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=564cff826fd14b8a2f71e663dec8e53b2243a836;p=linux-beck.git iio: light: opt3001: extract int. time constants Extract integration times as #define constants. This prepares using them for delay/timeout length determination. Signed-off-by: Alexander Koch Signed-off-by: Michael Hornung Tested-by: Andreas Dannenberg Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c index 01e111e72d4b..aefbd7989bda 100644 --- a/drivers/iio/light/opt3001.c +++ b/drivers/iio/light/opt3001.c @@ -65,6 +65,9 @@ #define OPT3001_REG_EXPONENT(n) ((n) >> 12) #define OPT3001_REG_MANTISSA(n) ((n) & 0xfff) +#define OPT3001_INT_TIME_LONG 800000 +#define OPT3001_INT_TIME_SHORT 100000 + /* * Time to wait for conversion result to be ready. The device datasheet * worst-case max value is 880ms. Add some slack to be on the safe side. @@ -325,13 +328,13 @@ static int opt3001_set_int_time(struct opt3001 *opt, int time) reg = ret; switch (time) { - case 100000: + case OPT3001_INT_TIME_SHORT: reg &= ~OPT3001_CONFIGURATION_CT; - opt->int_time = 100000; + opt->int_time = OPT3001_INT_TIME_SHORT; break; - case 800000: + case OPT3001_INT_TIME_LONG: reg |= OPT3001_CONFIGURATION_CT; - opt->int_time = 800000; + opt->int_time = OPT3001_INT_TIME_LONG; break; default: return -EINVAL; @@ -597,9 +600,9 @@ static int opt3001_configure(struct opt3001 *opt) /* Reflect status of the device's integration time setting */ if (reg & OPT3001_CONFIGURATION_CT) - opt->int_time = 800000; + opt->int_time = OPT3001_INT_TIME_LONG; else - opt->int_time = 100000; + opt->int_time = OPT3001_INT_TIME_SHORT; /* Ensure device is in shutdown initially */ opt3001_set_mode(opt, ®, OPT3001_CONFIGURATION_M_SHUTDOWN);