From: Nick Kossifidis Date: Thu, 28 Feb 2008 21:20:52 +0000 (-0500) Subject: ath5k: Fixes for PCI-E cards X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=56c9054f16ecb62bd83e9c55032522604d2f626c;p=linux-beck.git ath5k: Fixes for PCI-E cards * Fix nic_wakeup for PCI-E chips (don't set AR5K_RESET_CTL_PCI bit) * Fix dma size setting for PCI-E chips (thanx to Bob Copeland). Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index c0b65961f55f..04efceef95a8 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -171,13 +171,13 @@ struct ath5k_srev_name { #define AR5K_SREV_VER_AR5213A 0x59 #define AR5K_SREV_VER_AR2413 0x78 #define AR5K_SREV_VER_AR2414 0x79 -#define AR5K_SREV_VER_AR2424 0xa0 -#define AR5K_SREV_VER_AR5424 0xa3 +#define AR5K_SREV_VER_AR2424 0xa0 /* PCI-E */ +#define AR5K_SREV_VER_AR5424 0xa3 /* PCI-E */ #define AR5K_SREV_VER_AR5413 0xa4 #define AR5K_SREV_VER_AR5414 0xa5 -#define AR5K_SREV_VER_AR5416 0xc0 /* ? */ -#define AR5K_SREV_VER_AR5418 0xca -#define AR5K_SREV_VER_AR2425 0xe2 +#define AR5K_SREV_VER_AR5416 0xc0 /* PCI-E */ +#define AR5K_SREV_VER_AR5418 0xca /* PCI-E */ +#define AR5K_SREV_VER_AR2425 0xe2 /* PCI-E */ #define AR5K_SREV_RAD_5110 0x00 #define AR5K_SREV_RAD_5111 0x10 diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index bd1513d1460b..b275b1f234a5 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -300,7 +300,8 @@ err: */ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) { - u32 turbo, mode, clock; + struct pci_dev *pdev = ah->ah_sc->pdev; + u32 turbo, mode, clock, bus_flags; int ret; turbo = 0; @@ -377,9 +378,15 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) AR5K_PHY_TURBO); } - /* ...reset chipset and PCI device */ - if (ah->ah_single_chip == false && ath5k_hw_nic_reset(ah, - AR5K_RESET_CTL_CHIP | AR5K_RESET_CTL_PCI)) { + /* reseting PCI on PCI-E cards results card to hang + * and always return 0xffff... so we ingore that flag + * for PCI-E cards */ + bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI; + + /* Reset chipset */ + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + if (ret) { ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip + PCI\n"); return -EIO; } @@ -588,7 +595,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 data, s_seq, s_ant, s_led[3]; + struct pci_dev *pdev = ah->ah_sc->pdev; + u32 data, s_seq, s_ant, s_led[3], dma_size; unsigned int i, mode, freq, ee_mode, ant[2]; int ret; @@ -900,13 +908,24 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, /* * Set Rx/Tx DMA Configuration - *(passing dma size not available on 5210) + * + * Set maximum DMA size (512) except for PCI-E cards since + * it causes rx overruns and tx errors (tested on 5424 but since + * rx overruns also occur on 5416/5418 with madwifi we set 128 + * for all PCI-E cards to be safe). + * + * In dumps this is 128 for allchips. + * + * XXX: need to check 5210 for this + * TODO: Check out tx triger level, it's always 64 on dumps but I + * guess we can tweak it and see how it goes ;-) */ + dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B; if (ah->ah_version != AR5K_AR5210) { - AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, AR5K_TXCFG_SDMAMR, - AR5K_DMASIZE_512B | AR5K_TXCFG_DMASIZE); - AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_SDMAMW, - AR5K_DMASIZE_512B); + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_SDMAMR, dma_size); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, + AR5K_RXCFG_SDMAMW, dma_size); } /*