From: Scott Wood Date: Fri, 11 Jul 2008 22:55:25 +0000 (-0500) Subject: powerpc/mpc8313erdb: Add power management to the device tree. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=574366128db29e7da609ec1f9c01bf9d80adec87;p=linux-beck.git powerpc/mpc8313erdb: Add power management to the device tree. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 3664fb584026..2a94ae0dc8b8 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -109,18 +109,38 @@ reg = <0x200 0x100>; }; - i2c@3000 { + sleep-nexus { #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <14 0x8>; - interrupt-parent = <&ipic>; - dfsrr; - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x03000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x0122003f>; }; }; @@ -188,37 +208,44 @@ interrupt-parent = <&ipic>; interrupts = <38 0x8>; phy_type = "utmi_wide"; + sleep = <&pmc 0x00300000>; }; - mdio@24520 { + enet0: ethernet@24000 { #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x24520 0x20>; - phy1: ethernet-phy@1 { - interrupt-parent = <&ipic>; - interrupts = <19 0x8>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy4: ethernet-phy@4 { - interrupt-parent = <&ipic>; - interrupts = <20 0x8>; - reg = <0x4>; - device_type = "ethernet-phy"; - }; - }; + #size-cells = <1>; + sleep = <&pmc 0x20000000>; + ranges; - enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; model = "eTSEC"; - compatible = "gianfar"; + compatible = "gianfar", "simple-bus"; reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 0x8 36 0x8 35 0x8>; interrupt-parent = <&ipic>; phy-handle = < &phy1 >; + fsl,magic-packet; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x4>; + device_type = "ethernet-phy"; + }; + }; }; enet1: ethernet@25000 { @@ -231,6 +258,8 @@ interrupts = <34 0x8 33 0x8 32 0x8>; interrupt-parent = <&ipic>; phy-handle = < &phy4 >; + sleep = <&pmc 0x10000000>; + fsl,magic-packet; }; serial0: serial@4500 { @@ -253,17 +282,6 @@ interrupt-parent = <&ipic>; }; - crypto@30000 { - compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - fsl,num-channels = <1>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0x4c>; - fsl,descriptor-types-mask = <0x0122003f>; - }; - /* IPIC * interrupts cell = * sense values match linux IORESOURCE_IRQ_* defines: @@ -277,36 +295,119 @@ reg = <0x700 0x100>; device_type = "ipic"; }; + + pmc: power@b00 { + compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 8>; + interrupt-parent = <&ipic>; + fsl,mpc8313-wakeup-timer = <>m1>; + + /* Remove this (or change to "okay") if you have + * a REVA3 or later board, if you apply one of the + * workarounds listed in section 8.5 of the board + * manual, or if you are adapting this device tree + * to a different board. + */ + status = "fail"; + }; + + gtm1: timer@500 { + compatible = "fsl,mpc8313-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + }; + + timer@600 { + compatible = "fsl,mpc8313-gtm", "fsl,gtm"; + reg = <0x600 0x100>; + interrupts = <91 8 79 8 85 8 73 8>; + interrupt-parent = <&ipic>; + }; }; - pci0: pci@e0008500 { - cell-index = <1>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x0E -mini PCI */ - 0x7000 0x0 0x0 0x1 &ipic 18 0x8 - 0x7000 0x0 0x0 0x2 &ipic 18 0x8 - 0x7000 0x0 0x0 0x3 &ipic 18 0x8 - 0x7000 0x0 0x0 0x4 &ipic 18 0x8 - - /* IDSEL 0x0F - PCI slot */ - 0x7800 0x0 0x0 0x1 &ipic 17 0x8 - 0x7800 0x0 0x0 0x2 &ipic 18 0x8 - 0x7800 0x0 0x0 0x3 &ipic 17 0x8 - 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0x0 0x0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00010000>; + ranges; + + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 + + /* IDSEL 0x0F - PCI slot */ + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 18 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8313-dma", "fsl,elo-dma"; + reg = <0xe00082a8 4>; + ranges = <0 0xe0008100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + + dma-channel@0 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + }; + + dma-channel@80 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0x80 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <1>; + }; + + dma-channel@100 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0x100 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <2>; + }; + + dma-channel@180 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <3>; + }; + }; }; };