From: Li Yang Date: Mon, 7 Jan 2008 12:03:18 +0000 (+0800) Subject: [POWERPC] 83xx: add device trees for MPC837x MDS board X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5761bc5dae656b96e4bb22fd05480e5beddab24c;p=linux-beck.git [POWERPC] 83xx: add device trees for MPC837x MDS board Signed-off-by: Li Yang Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts new file mode 100644 index 000000000000..98b46065f45a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -0,0 +1,279 @@ +/* + * MPC8377E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8377emds"; + compatible = "fsl,mpc8377emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; + i-cache-line-size = <0x20>; + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0xe 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0xf 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + spi@7000 { + compatible = "fsl_spi"; + reg = <0x7000 0x1000>; + interrupts = <0x10 0x8>; + interrupt-parent = < &ipic >; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <0x26 0x8>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = < &ipic >; + interrupts = <0x11 0x8>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = < &ipic >; + interrupts = <0x12 0x8>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy2 >; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy3 >; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x9 0x8>; + interrupt-parent = < &ipic >; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0xa 0x8>; + interrupt-parent = < &ipic >; + }; + + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <0xb 0x8>; + interrupt-parent = < &ipic >; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <0x18>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <0x2a 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x18000 0x1000>; + interrupts = <0x2c 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x19000 0x1000>; + interrupts = <0x2d 0x8>; + interrupt-parent = < &ipic >; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 0x16 0x8 + 0x9000 0x0 0x0 0x2 &ipic 0x17 0x8 + 0x9000 0x0 0x0 0x3 &ipic 0x14 0x8 + 0x9000 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 0x17 0x8 + 0x9800 0x0 0x0 0x2 &ipic 0x14 0x8 + 0x9800 0x0 0x0 0x3 &ipic 0x15 0x8 + 0x9800 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0xa800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0xa800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0xa800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 0x17 0x8 + 0xb000 0x0 0x0 0x2 &ipic 0x14 0x8 + 0xb000 0x0 0x0 0x3 &ipic 0x15 0x8 + 0xb000 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 0x16 0x8 + 0xb800 0x0 0x0 0x2 &ipic 0x17 0x8 + 0xb800 0x0 0x0 0x3 &ipic 0x14 0x8 + 0xb800 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 0x15 0x8 + 0xc000 0x0 0x0 0x2 &ipic 0x16 0x8 + 0xc000 0x0 0x0 0x3 &ipic 0x17 0x8 + 0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>; + interrupt-parent = < &ipic >; + interrupts = <0x42 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts new file mode 100644 index 000000000000..c117a6a3a8e6 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -0,0 +1,265 @@ +/* + * MPC8378E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8378emds"; + compatible = "fsl,mpc8378emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8378@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; + i-cache-line-size = <0x20>; + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0xe 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0xf 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + spi@7000 { + compatible = "fsl_spi"; + reg = <0x7000 0x1000>; + interrupts = <0x10 0x8>; + interrupt-parent = < &ipic >; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <0x26 0x8>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = < &ipic >; + interrupts = <0x11 0x8>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = < &ipic >; + interrupts = <0x12 0x8>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy2 >; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy3 >; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x9 0x8>; + interrupt-parent = < &ipic >; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0xa 0x8>; + interrupt-parent = < &ipic >; + }; + + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <0xb 0x8>; + interrupt-parent = < &ipic >; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <0x18>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <0x2a 0x8>; + interrupt-parent = < &ipic >; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 0x16 0x8 + 0x9000 0x0 0x0 0x2 &ipic 0x17 0x8 + 0x9000 0x0 0x0 0x3 &ipic 0x14 0x8 + 0x9000 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 0x17 0x8 + 0x9800 0x0 0x0 0x2 &ipic 0x14 0x8 + 0x9800 0x0 0x0 0x3 &ipic 0x15 0x8 + 0x9800 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0xa800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0xa800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0xa800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 0x17 0x8 + 0xb000 0x0 0x0 0x2 &ipic 0x14 0x8 + 0xb000 0x0 0x0 0x3 &ipic 0x15 0x8 + 0xb000 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 0x16 0x8 + 0xb800 0x0 0x0 0x2 &ipic 0x17 0x8 + 0xb800 0x0 0x0 0x3 &ipic 0x14 0x8 + 0xb800 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 0x15 0x8 + 0xc000 0x0 0x0 0x2 &ipic 0x16 0x8 + 0xc000 0x0 0x0 0x3 &ipic 0x17 0x8 + 0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>; + interrupt-parent = < &ipic >; + interrupts = <0x42 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts new file mode 100644 index 000000000000..fc3ba79fb684 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -0,0 +1,293 @@ +/* + * MPC8379E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8379emds"; + compatible = "fsl,mpc8379emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8379@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; + i-cache-line-size = <0x20>; + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0xe 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0xf 0x8>; + interrupt-parent = < &ipic >; + dfsrr; + }; + + spi@7000 { + compatible = "fsl_spi"; + reg = <0x7000 0x1000>; + interrupts = <0x10 0x8>; + interrupt-parent = < &ipic >; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <0x26 0x8>; + phy_type = "utmi_wide"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = < &ipic >; + interrupts = <0x11 0x8>; + reg = <2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupt-parent = < &ipic >; + interrupts = <0x12 0x8>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy2 >; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>; + phy-connection-type = "mii"; + interrupt-parent = < &ipic >; + phy-handle = < &phy3 >; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x9 0x8>; + interrupt-parent = < &ipic >; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0xa 0x8>; + interrupt-parent = < &ipic >; + }; + + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <0xb 0x8>; + interrupt-parent = < &ipic >; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <0x18>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <0x2a 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x18000 0x1000>; + interrupts = <0x2c 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x19000 0x1000>; + interrupts = <0x2d 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@1a000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x1a000 0x1000>; + interrupts = <0x2e 0x8>; + interrupt-parent = < &ipic >; + }; + + sata@1b000 { + compatible = "fsl,mpc8379-sata"; + reg = <0x1b000 0x1000>; + interrupts = <0x2f 0x8>; + interrupt-parent = < &ipic >; + }; + + /* IPIC + * interrupts cell = + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + }; + + pci0: pci@e0008500 { + cell-index = <0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0x8800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0x8800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0x8800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 0x16 0x8 + 0x9000 0x0 0x0 0x2 &ipic 0x17 0x8 + 0x9000 0x0 0x0 0x3 &ipic 0x14 0x8 + 0x9000 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 0x17 0x8 + 0x9800 0x0 0x0 0x2 &ipic 0x14 0x8 + 0x9800 0x0 0x0 0x3 &ipic 0x15 0x8 + 0x9800 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 0x14 0x8 + 0xa800 0x0 0x0 0x2 &ipic 0x15 0x8 + 0xa800 0x0 0x0 0x3 &ipic 0x16 0x8 + 0xa800 0x0 0x0 0x4 &ipic 0x17 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 0x17 0x8 + 0xb000 0x0 0x0 0x2 &ipic 0x14 0x8 + 0xb000 0x0 0x0 0x3 &ipic 0x15 0x8 + 0xb000 0x0 0x0 0x4 &ipic 0x16 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 0x16 0x8 + 0xb800 0x0 0x0 0x2 &ipic 0x17 0x8 + 0xb800 0x0 0x0 0x3 &ipic 0x14 0x8 + 0xb800 0x0 0x0 0x4 &ipic 0x15 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 0x15 0x8 + 0xc000 0x0 0x0 0x2 &ipic 0x16 0x8 + 0xc000 0x0 0x0 0x3 &ipic 0x17 0x8 + 0xc000 0x0 0x0 0x4 &ipic 0x14 0x8>; + interrupt-parent = < &ipic >; + interrupts = <0x42 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +};