From: Antoine Tenart Date: Tue, 7 Apr 2015 14:45:06 +0000 (+0200) Subject: Documentation: bindings: update the berlin chip and system ctrl doc X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=576efe38000dc81d8140925d9725a4f4e789514a;p=linux-beck.git Documentation: bindings: update the berlin chip and system ctrl doc Now that the rework to have one sub-node per device in the chip and system controllers is done, their dedicated compatible can be removed. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt index 4a61bd802491..3bab18409b7a 100644 --- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -62,11 +62,7 @@ different functions which are described below. Required properties: - compatible: - * the first value should be one of: - "marvell,berlin2-chip-ctrl" for BG2 - "marvell,berlin2cd-chip-ctrl" for BG2CD - "marvell,berlin2q-chip-ctrl" for BG2Q - * the second and third values must be: + * the first and second values must be: "simple-mfd", "syscon" - reg: address and length of following register sets for BG2/BG2CD: chip control register set @@ -79,25 +75,21 @@ individual registers dealing with pinmux, padmux, and reset. Required properties: - compatible: - * the first value should be one of: - "marvell,berlin2-system-ctrl" for BG2 - "marvell,berlin2cd-system-ctrl" for BG2CD - "marvell,berlin2q-system-ctrl" for BG2Q - * the second and third values must be: + * the first and second values must be: "simple-mfd", "syscon" - reg: address and length of the system control register set Example: chip: chip-control@ea0000 { - compatible = "marvell,berlin2-chip-ctrl", "simple-mfd", "syscon"; + compatible = "simple-mfd", "syscon"; reg = <0xea0000 0x400>; /* sub-device nodes */ }; sysctrl: system-controller@d000 { - compatible = "marvell,berlin2-system-ctrl", "simple-mfd", "syscon"; + compatible = "simple-mfd", "syscon"; reg = <0xd000 0x100>; /* sub-device nodes */