From: Nicholas Piggin Date: Wed, 28 Sep 2016 01:31:48 +0000 (+1000) Subject: powerpc: Use gas sections for arranging exception vectors X-Git-Tag: v4.9-rc1~84^2~81 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=57f266497d81;p=karo-tx-linux.git powerpc: Use gas sections for arranging exception vectors Use assembler sections of fixed size and location to arrange the 64-bit Book3S exception vector code (64-bit Book3E also uses it in head_64.S for 0x0..0x100). This allows better flexibility in arranging exception code and hiding unimportant details behind macros. Gas sections can be a bit painful to use this way, mainly because the assembler does not know where they will be finally linked. Taking absolute addresses requires a bit of trickery for example, but it can be hidden behind macros for the most part. Generated code is mostly the same except locations, offsets, alignments. The "+ 0x2" is only required for the trap number / kvm exit number, which gets loaded as a constant into a register. Previously, code also used + 0x2 for label names, but we changed to using "H" to distinguish HV case for that. Remove the last vestiges of that. __after_prom_start is taking absolute address of a label in another fixed section. Newer toolchains seemed to compile this okay, but older ones do not. FIXED_SYMBOL_ABS_ADDR is more foolproof, it just takes an additional line to define. Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman --- diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 72f2b1e3f343..2e4e7d878c8e 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -91,7 +91,7 @@ */ #define LOAD_HANDLER(reg, label) \ ld reg,PACAKBASE(r13); /* get high part of &label */ \ - ori reg,reg,((label)-_stext)@l; /* virt addr of handler ... */ + ori reg,reg,(FIXED_SYMBOL_ABS_ADDR(label))@l; /* Exception register prefixes */ #define EXC_HV H diff --git a/arch/powerpc/include/asm/head-64.h b/arch/powerpc/include/asm/head-64.h index 613f743e91aa..ab90c2fa1ea6 100644 --- a/arch/powerpc/include/asm/head-64.h +++ b/arch/powerpc/include/asm/head-64.h @@ -3,28 +3,218 @@ #include +/* + * We can't do CPP stringification and concatination directly into the section + * name for some reason, so these macros can do it for us. + */ +.macro define_ftsec name + .section ".head.text.\name\()","ax",@progbits +.endm +.macro define_data_ftsec name + .section ".head.data.\name\()","a",@progbits +.endm +.macro use_ftsec name + .section ".head.text.\name\()" +.endm + +/* + * Fixed (location) sections are used by opening fixed sections and emitting + * fixed section entries into them before closing them. Multiple fixed sections + * can be open at any time. + * + * Each fixed section created in a .S file must have corresponding linkage + * directives including location, added to arch/powerpc/kernel/vmlinux.lds.S + * + * For each fixed section, code is generated into it in the order which it + * appears in the source. Fixed section entries can be placed at a fixed + * location within the section using _LOCATION postifx variants. These must + * be ordered according to their relative placements within the section. + * + * OPEN_FIXED_SECTION(section_name, start_address, end_address) + * FIXED_SECTION_ENTRY_BEGIN(section_name, label1) + * + * USE_FIXED_SECTION(section_name) + * label3: + * li r10,128 + * mv r11,r10 + + * FIXED_SECTION_ENTRY_BEGIN_LOCATION(section_name, label2, start_address) + * FIXED_SECTION_ENTRY_END_LOCATION(section_name, label2, end_address) + * CLOSE_FIXED_SECTION(section_name) + * + * ZERO_FIXED_SECTION can be used to emit zeroed data. + * + * Troubleshooting: + * - If the build dies with "Error: attempt to move .org backwards" at + * CLOSE_FIXED_SECTION() or elsewhere, there may be something + * unexpected being added there. Remove the '. = x_len' line, rebuild, and + * check what is pushing the section down. + * - If the build dies in linking, check arch/powerpc/kernel/vmlinux.lds.S + * for instructions. + * - If the kernel crashes or hangs in very early boot, it could be linker + * stubs at the start of the main text. + */ + +#define OPEN_FIXED_SECTION(sname, start, end) \ + sname##_start = (start); \ + sname##_end = (end); \ + sname##_len = (end) - (start); \ + define_ftsec sname; \ + . = 0x0; \ +start_##sname: + +#define OPEN_TEXT_SECTION(start) \ + text_start = (start); \ + .section ".text","ax",@progbits; \ + . = 0x0; \ +start_text: + +#define ZERO_FIXED_SECTION(sname, start, end) \ + sname##_start = (start); \ + sname##_end = (end); \ + sname##_len = (end) - (start); \ + define_data_ftsec sname; \ + . = 0x0; \ + . = sname##_len; + +#define USE_FIXED_SECTION(sname) \ + fs_label = start_##sname; \ + fs_start = sname##_start; \ + use_ftsec sname; + +#define USE_TEXT_SECTION() \ + fs_label = start_text; \ + fs_start = text_start; \ + .text + +#define CLOSE_FIXED_SECTION(sname) \ + USE_FIXED_SECTION(sname); \ + . = sname##_len; \ +end_##sname: + + +#define __FIXED_SECTION_ENTRY_BEGIN(sname, name, __align) \ + USE_FIXED_SECTION(sname); \ + .align __align; \ + .global name; \ +name: + +#define FIXED_SECTION_ENTRY_BEGIN(sname, name) \ + __FIXED_SECTION_ENTRY_BEGIN(sname, name, 0) + +#define FIXED_SECTION_ENTRY_BEGIN_LOCATION(sname, name, start) \ + USE_FIXED_SECTION(sname); \ + name##_start = (start); \ + .if (start) < sname##_start; \ + .error "Fixed section underflow"; \ + .abort; \ + .endif; \ + . = (start) - sname##_start; \ + .global name; \ +name: + +#define FIXED_SECTION_ENTRY_END_LOCATION(sname, name, end) \ + .if (end) > sname##_end; \ + .error "Fixed section overflow"; \ + .abort; \ + .endif; \ + .if (. - name > end - name##_start); \ + .error "Fixed entry overflow"; \ + .abort; \ + .endif; \ + . = ((end) - sname##_start); \ + + +/* + * These macros are used to change symbols in other fixed sections to be + * absolute or related to our current fixed section. + * + * - DEFINE_FIXED_SYMBOL / FIXED_SYMBOL_ABS_ADDR is used to find the + * absolute address of a symbol within a fixed section, from any section. + * + * - ABS_ADDR is used to find the absolute address of any symbol, from within + * a fixed section. + */ +#define DEFINE_FIXED_SYMBOL(label) \ + label##_absolute = (label - fs_label + fs_start) + +#define FIXED_SYMBOL_ABS_ADDR(label) \ + (label##_absolute) + +#define ABS_ADDR(label) (label - fs_label + fs_start) + +/* + * Following are the BOOK3S exception handler helper macros. + * Handlers come in a number of types, and each type has a number of varieties. + * + * EXC_REAL_* - real, unrelocated exception vectors + * EXC_VIRT_* - virt (AIL), unrelocated exception vectors + * TRAMP_REAL_* - real, unrelocated helpers (virt can call these) + * TRAMP_VIRT_* - virt, unreloc helpers (in practice, real can use) + * TRAMP_KVM - KVM handlers that get put into real, unrelocated + * EXC_COMMON_* - virt, relocated common handlers + * + * The EXC handlers are given a name, and branch to name_common, or the + * appropriate KVM or masking function. Vector handler verieties are as + * follows: + * + * EXC_{REAL|VIRT}_BEGIN/END - used to open-code the exception + * + * EXC_{REAL|VIRT} - standard exception + * + * EXC_{REAL|VIRT}_suffix + * where _suffix is: + * - _MASKABLE - maskable exception + * - _OOL - out of line with trampoline to common handler + * - _HV - HV exception + * + * There can be combinations, e.g., EXC_VIRT_OOL_MASKABLE_HV + * + * The one unusual case is __EXC_REAL_OOL_HV_DIRECT, which is + * an OOL vector that branches to a specified handler rather than the usual + * trampoline that goes to common. It, and other underscore macros, should + * be used with care. + * + * KVM handlers come in the following verieties: + * TRAMP_KVM + * TRAMP_KVM_SKIP + * TRAMP_KVM_HV + * TRAMP_KVM_HV_SKIP + * + * COMMON handlers come in the following verieties: + * EXC_COMMON_BEGIN/END - used to open-code the handler + * EXC_COMMON + * EXC_COMMON_ASYNC + * EXC_COMMON_HV + * + * TRAMP_REAL and TRAMP_VIRT can be used with BEGIN/END. KVM + * and OOL handlers are implemented as types of TRAMP and TRAMP_VIRT handlers. + */ + #define EXC_REAL_BEGIN(name, start, end) \ - . = start ; \ - .global exc_real_##start##_##name ; \ -exc_real_##start##_##name: + FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##name, start) -#define EXC_REAL_END(name, start, end) +#define EXC_REAL_END(name, start, end) \ + FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##name, end) #define EXC_VIRT_BEGIN(name, start, end) \ - . = start ; \ - .global exc_virt_##start##_##name ; \ -exc_virt_##start##_##name: + FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##name, start) -#define EXC_VIRT_END(name, start, end) +#define EXC_VIRT_END(name, start, end) \ + FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##name, end) #define EXC_COMMON_BEGIN(name) \ + USE_TEXT_SECTION(); \ .align 7; \ .global name; \ + DEFINE_FIXED_SYMBOL(name); \ name: #define TRAMP_REAL_BEGIN(name) \ - .global name ; \ -name: + FIXED_SECTION_ENTRY_BEGIN(real_trampolines, name) + +#define TRAMP_VIRT_BEGIN(name) \ + FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name) #ifdef CONFIG_KVM_BOOK3S_64_HANDLER #define TRAMP_KVM_BEGIN(name) \ @@ -33,9 +223,13 @@ name: #define TRAMP_KVM_BEGIN(name) #endif -#define EXC_REAL_NONE(start, end) +#define EXC_REAL_NONE(start, end) \ + FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start); \ + FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, end) -#define EXC_VIRT_NONE(start, end) +#define EXC_VIRT_NONE(start, end) \ + FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##unused, start); \ + FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##unused, end); #define EXC_REAL(name, start, end) \ @@ -77,6 +271,10 @@ name: TRAMP_REAL_BEGIN(tramp_real_##name); \ STD_EXCEPTION_PSERIES_OOL(vec, name##_common); \ +#define EXC_REAL_OOL(name, start, end) \ + __EXC_REAL_OOL(name, start, end); \ + __TRAMP_REAL_REAL_OOL(name, start); + #define __EXC_REAL_OOL_MASKABLE(name, start, end) \ __EXC_REAL_OOL(name, start, end); @@ -84,6 +282,10 @@ name: TRAMP_REAL_BEGIN(tramp_real_##name); \ MASKABLE_EXCEPTION_PSERIES_OOL(vec, name##_common); \ +#define EXC_REAL_OOL_MASKABLE(name, start, end) \ + __EXC_REAL_OOL_MASKABLE(name, start, end); \ + __TRAMP_REAL_REAL_OOL_MASKABLE(name, start); + #define __EXC_REAL_OOL_HV_DIRECT(name, start, end, handler) \ EXC_REAL_BEGIN(name, start, end); \ __OOL_EXCEPTION(start, label, handler); \ @@ -96,6 +298,10 @@ name: TRAMP_REAL_BEGIN(tramp_real_##name); \ STD_EXCEPTION_HV_OOL(vec, name##_common); \ +#define EXC_REAL_OOL_HV(name, start, end) \ + __EXC_REAL_OOL_HV(name, start, end); \ + __TRAMP_REAL_REAL_OOL_HV(name, start); + #define __EXC_REAL_OOL_MASKABLE_HV(name, start, end) \ __EXC_REAL_OOL(name, start, end); @@ -103,36 +309,56 @@ name: TRAMP_REAL_BEGIN(tramp_real_##name); \ MASKABLE_EXCEPTION_HV_OOL(vec, name##_common); \ +#define EXC_REAL_OOL_MASKABLE_HV(name, start, end) \ + __EXC_REAL_OOL_MASKABLE_HV(name, start, end); \ + __TRAMP_REAL_REAL_OOL_MASKABLE_HV(name, start); + #define __EXC_VIRT_OOL(name, start, end) \ EXC_VIRT_BEGIN(name, start, end); \ __OOL_EXCEPTION(start, label, tramp_virt_##name); \ EXC_VIRT_END(name, start, end); #define __TRAMP_REAL_VIRT_OOL(name, realvec) \ - TRAMP_REAL_BEGIN(tramp_virt_##name); \ + TRAMP_VIRT_BEGIN(tramp_virt_##name); \ STD_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common); \ +#define EXC_VIRT_OOL(name, start, end, realvec) \ + __EXC_VIRT_OOL(name, start, end); \ + __TRAMP_REAL_VIRT_OOL(name, realvec); + #define __EXC_VIRT_OOL_MASKABLE(name, start, end) \ __EXC_VIRT_OOL(name, start, end); #define __TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec) \ - TRAMP_REAL_BEGIN(tramp_virt_##name); \ + TRAMP_VIRT_BEGIN(tramp_virt_##name); \ MASKABLE_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common); \ +#define EXC_VIRT_OOL_MASKABLE(name, start, end, realvec) \ + __EXC_VIRT_OOL_MASKABLE(name, start, end); \ + __TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec); + #define __EXC_VIRT_OOL_HV(name, start, end) \ __EXC_VIRT_OOL(name, start, end); #define __TRAMP_REAL_VIRT_OOL_HV(name, realvec) \ - TRAMP_REAL_BEGIN(tramp_virt_##name); \ + TRAMP_VIRT_BEGIN(tramp_virt_##name); \ STD_RELON_EXCEPTION_HV_OOL(realvec, name##_common); \ +#define EXC_VIRT_OOL_HV(name, start, end, realvec) \ + __EXC_VIRT_OOL_HV(name, start, end); \ + __TRAMP_REAL_VIRT_OOL_HV(name, realvec); + #define __EXC_VIRT_OOL_MASKABLE_HV(name, start, end) \ __EXC_VIRT_OOL(name, start, end); #define __TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec) \ - TRAMP_REAL_BEGIN(tramp_virt_##name); \ + TRAMP_VIRT_BEGIN(tramp_virt_##name); \ MASKABLE_RELON_EXCEPTION_HV_OOL(realvec, name##_common); \ +#define EXC_VIRT_OOL_MASKABLE_HV(name, start, end, realvec) \ + __EXC_VIRT_OOL_MASKABLE_HV(name, start, end); \ + __TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec); + #define TRAMP_KVM(area, n) \ TRAMP_KVM_BEGIN(do_kvm_##n); \ KVM_HANDLER(area, EXC_STD, n); \ @@ -141,6 +367,9 @@ name: TRAMP_KVM_BEGIN(do_kvm_##n); \ KVM_HANDLER_SKIP(area, EXC_STD, n); \ +/* + * HV variant exceptions get the 0x2 bit added to their trap number. + */ #define TRAMP_KVM_HV(area, n) \ TRAMP_KVM_BEGIN(do_kvm_H##n); \ KVM_HANDLER(area, EXC_HV, n + 0x2); \ diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index d398e8716ef8..6ea330a3c51a 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -19,16 +19,68 @@ #include /* + * There are a few constraints to be concerned with. + * - Real mode exceptions code/data must be located at their physical location. + * - Virtual mode exceptions must be mapped at their 0xc000... location. + * - Fixed location code must not call directly beyond the __end_interrupts + * area when built with CONFIG_RELOCATABLE. LOAD_HANDLER / bctr sequence + * must be used. + * - LOAD_HANDLER targets must be within first 64K of physical 0 / + * virtual 0xc00... + * - Conditional branch targets must be within +/-32K of caller. + * + * "Virtual exceptions" run with relocation on (MSR_IR=1, MSR_DR=1), and + * therefore don't have to run in physically located code or rfid to + * virtual mode kernel code. However on relocatable kernels they do have + * to branch to KERNELBASE offset because the rest of the kernel (outside + * the exception vectors) may be located elsewhere. + * + * Virtual exceptions correspond with physical, except their entry points + * are offset by 0xc000000000000000 and also tend to get an added 0x4000 + * offset applied. Virtual exceptions are enabled with the Alternate + * Interrupt Location (AIL) bit set in the LPCR. However this does not + * guarantee they will be delivered virtually. Some conditions (see the ISA) + * cause exceptions to be delivered in real mode. + * + * It's impossible to receive interrupts below 0x300 via AIL. + * + * KVM: None of the virtual exceptions are from the guest. Anything that + * escalated to HV=1 from HV=0 is delivered via real mode handlers. + * + * * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code - * 0x0100 - 0x17ff : pSeries Interrupt prologs - * 0x1800 - 0x4000 : interrupt support common interrupt prologs - * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1 - * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1 + * 0x0100 - 0x18ff : Real mode pSeries interrupt vectors + * 0x1900 - 0x3fff : Real mode trampolines + * 0x4000 - 0x58ff : Relon (IR=1,DR=1) mode pSeries interrupt vectors + * 0x5900 - 0x6fff : Relon mode trampolines * 0x7000 - 0x7fff : FWNMI data area - * 0x8000 - 0x8fff : Initial (CPU0) segment table - * 0x9000 - : Early init and support code + * 0x8000 - .... : Common interrupt handlers, remaining early + * setup code, rest of kernel. + */ +OPEN_FIXED_SECTION(real_vectors, 0x0100, 0x1900) +OPEN_FIXED_SECTION(real_trampolines, 0x1900, 0x4000) +OPEN_FIXED_SECTION(virt_vectors, 0x4000, 0x5900) +OPEN_FIXED_SECTION(virt_trampolines, 0x5900, 0x7000) +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) +/* + * Data area reserved for FWNMI option. + * This address (0x7000) is fixed by the RPA. + * pseries and powernv need to keep the whole page from + * 0x7000 to 0x8000 free for use by the firmware */ +ZERO_FIXED_SECTION(fwnmi_page, 0x7000, 0x8000) +OPEN_TEXT_SECTION(0x8000) +#else +OPEN_TEXT_SECTION(0x7000) +#endif + +USE_FIXED_SECTION(real_vectors) + +#define LOAD_SYSCALL_HANDLER(reg) \ + ld reg,PACAKBASE(r13); \ + ori reg,reg,(ABS_ADDR(system_call_common))@l; + /* Syscall routine is used twice, in reloc-off and reloc-on paths */ #define SYSCALL_PSERIES_1 \ BEGIN_FTR_SECTION \ @@ -42,7 +94,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \ #define SYSCALL_PSERIES_2_RFID \ mfspr r12,SPRN_SRR1 ; \ - LOAD_HANDLER(r10, system_call_common) ; \ + LOAD_SYSCALL_HANDLER(r10) ; \ mtspr SPRN_SRR0,r10 ; \ ld r10,PACAKMSR(r13) ; \ mtspr SPRN_SRR1,r10 ; \ @@ -63,7 +115,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \ * is volatile across system calls. */ #define SYSCALL_PSERIES_2_DIRECT \ - LOAD_HANDLER(r12, system_call_common) ; \ + LOAD_SYSCALL_HANDLER(r12) ; \ mtctr r12 ; \ mfspr r12,SPRN_SRR1 ; \ li r10,MSR_RI ; \ @@ -86,7 +138,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \ * Therefore any relative branches in this section must only * branch to labels in this section. */ - . = 0x100 .globl __start_interrupts __start_interrupts: @@ -200,9 +251,6 @@ EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x500) #endif EXC_REAL_END(instruction_access_slb, 0x480, 0x500) - /* We open code these as we can't have a ". = x" (even with - * x = "." within a feature section - */ EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x600) .globl hardware_interrupt_hv; hardware_interrupt_hv: @@ -306,7 +354,6 @@ __EXC_REAL_OOL_HV(h_facility_unavailable, 0xf80, 0xfa0) EXC_REAL_NONE(0xfa0, 0x1200) - #ifdef CONFIG_CBE_RAS EXC_REAL_HV(cbe_system_error, 0x1200, 0x1300) @@ -359,7 +406,6 @@ TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1800) #else /* CONFIG_CBE_RAS */ EXC_REAL_NONE(0x1800, 0x1900) - . = 0x1800 #endif @@ -606,7 +652,13 @@ masked_##_H##interrupt: \ GET_SCRATCH0(r13); \ ##_H##rfid; \ b . - + +/* + * Real mode exceptions actually use this too, but alternate + * instruction code patches (which end up in the common .text area) + * cannot reach these if they are put there. + */ +USE_FIXED_SECTION(virt_trampolines) MASKED_INTERRUPT() MASKED_INTERRUPT(H) @@ -620,6 +672,7 @@ masked_##_H##interrupt: \ * in the generated frame has EE set to 1 or the exception * handler will not properly re-enable them. */ +USE_TEXT_SECTION() _GLOBAL(__replay_interrupt) /* We are going to jump to the exception common code which * will retrieve various register values from the PACA which @@ -862,7 +915,7 @@ EXC_VIRT(altivec_assist, 0x5700, 0x5800, 0x1700) EXC_VIRT_NONE(0x5800, 0x5900) -TRAMP_REAL_BEGIN(ppc64_runlatch_on_trampoline) +EXC_COMMON_BEGIN(ppc64_runlatch_on_trampoline) b __ppc64_runlatch_on /* @@ -1070,6 +1123,7 @@ __TRAMP_REAL_VIRT_OOL(vsx_unavailable, 0xf40) __TRAMP_REAL_VIRT_OOL(facility_unavailable, 0xf60) __TRAMP_REAL_VIRT_OOL_HV(h_facility_unavailable, 0xf80) +USE_FIXED_SECTION(virt_trampolines) /* * The __end_interrupts marker must be past the out-of-line (OOL) * handlers, so that they are copied to real address 0x100 when running @@ -1080,21 +1134,7 @@ __TRAMP_REAL_VIRT_OOL_HV(h_facility_unavailable, 0xf80) .align 7 .globl __end_interrupts __end_interrupts: - -#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) -/* - * Data area reserved for FWNMI option. - * This address (0x7000) is fixed by the RPA. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - - /* pseries and powernv need to keep the whole page from - * 0x7000 to 0x8000 free for use by the firmware - */ - . = 0x8000 -#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ +DEFINE_FIXED_SYMBOL(__end_interrupts) EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception) EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception) @@ -1106,7 +1146,7 @@ EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception) #endif /* CONFIG_CBE_RAS */ -EXC_COMMON_BEGIN(hmi_exception_early) +TRAMP_REAL_BEGIN(hmi_exception_early) EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, 0xe60) mr r10,r1 /* Save r1 */ ld r1,PACAEMERGSP(r13) /* Use emergency stack */ @@ -1430,6 +1470,13 @@ TRAMP_REAL_BEGIN(power4_fixup_nap) blr #endif +CLOSE_FIXED_SECTION(real_vectors); +CLOSE_FIXED_SECTION(real_trampolines); +CLOSE_FIXED_SECTION(virt_vectors); +CLOSE_FIXED_SECTION(virt_trampolines); + +USE_TEXT_SECTION() + /* * Hash table stuff */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 6e21812ee672..79da0641bae2 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -65,9 +66,14 @@ * 2. The kernel is entered at __start */ - .text - .globl _stext -_stext: +OPEN_FIXED_SECTION(first_256B, 0x0, 0x100) +USE_FIXED_SECTION(first_256B) + /* + * Offsets are relative from the start of fixed section, and + * first_256B starts at 0. Offsets are a bit easier to use here + * than the fixed section entry macros. + */ + . = 0x0 _GLOBAL(__start) /* NOP this out unconditionally */ BEGIN_FTR_SECTION @@ -104,6 +110,7 @@ __secondary_hold_acknowledge: . = 0x5c .globl __run_at_load __run_at_load: +DEFINE_FIXED_SYMBOL(__run_at_load) .long 0x72756e30 /* "run0" -- relocate to 0 by default */ #endif @@ -133,7 +140,7 @@ __secondary_hold: /* Tell the master cpu we're here */ /* Relocation is off & we are located at an address less */ /* than 0x100, so only need to grab low order offset. */ - std r24,__secondary_hold_acknowledge-_stext(0) + std r24,(ABS_ADDR(__secondary_hold_acknowledge))(0) sync li r26,0 @@ -141,7 +148,7 @@ __secondary_hold: tovirt(r26,r26) #endif /* All secondary cpus wait here until told to start. */ -100: ld r12,__secondary_hold_spinloop-_stext(r26) +100: ld r12,(ABS_ADDR(__secondary_hold_spinloop))(r26) cmpdi 0,r12,0 beq 100b @@ -166,12 +173,13 @@ __secondary_hold: #else BUG_OPCODE #endif +CLOSE_FIXED_SECTION(first_256B) /* This value is used to mark exception frames on the stack. */ .section ".toc","aw" exception_marker: .tc ID_72656773_68657265[TC],0x7265677368657265 - .text + .previous /* * On server, we include the exception vectors code here as it @@ -180,8 +188,12 @@ exception_marker: */ #ifdef CONFIG_PPC_BOOK3S #include "exceptions-64s.S" +#else +OPEN_TEXT_SECTION(0x100) #endif +USE_TEXT_SECTION() + #ifdef CONFIG_PPC_BOOK3E /* * The booting_thread_hwid holds the thread id we want to boot in cpu @@ -558,7 +570,7 @@ __after_prom_start: #if defined(CONFIG_PPC_BOOK3E) tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */ #endif - lwz r7,__run_at_load-_stext(r26) + lwz r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26) #if defined(CONFIG_PPC_BOOK3E) tophys(r26,r26) #endif @@ -601,7 +613,7 @@ __after_prom_start: #if defined(CONFIG_PPC_BOOK3E) tovirt(r26,r26) /* on booke, we already run at PAGE_OFFSET */ #endif - lwz r7,__run_at_load-_stext(r26) + lwz r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26) cmplwi cr0,r7,1 bne 3f @@ -611,19 +623,21 @@ __after_prom_start: sub r5,r5,r11 #else /* just copy interrupts */ - LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext) + LOAD_REG_IMMEDIATE(r5, FIXED_SYMBOL_ABS_ADDR(__end_interrupts)) #endif b 5f 3: #endif - lis r5,(copy_to_here - _stext)@ha - addi r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */ + /* # bytes of memory to copy */ + lis r5,(ABS_ADDR(copy_to_here))@ha + addi r5,r5,(ABS_ADDR(copy_to_here))@l bl copy_and_flush /* copy the first n bytes */ /* this includes the code being */ /* executed here. */ - addis r8,r3,(4f - _stext)@ha /* Jump to the copy of this code */ - addi r12,r8,(4f - _stext)@l /* that we just made */ + /* Jump to the copy of this code that we just made */ + addis r8,r3,(ABS_ADDR(4f))@ha + addi r12,r8,(ABS_ADDR(4f))@l mtctr r12 bctr @@ -635,8 +649,8 @@ p_end: .llong _end - copy_to_here * Now copy the rest of the kernel up to _end, add * _end - copy_to_here to the copy limit and run again. */ - addis r8,r26,(p_end - _stext)@ha - ld r8,(p_end - _stext)@l(r8) + addis r8,r26,(ABS_ADDR(p_end))@ha + ld r8,(ABS_ADDR(p_end))@l(r8) add r5,r5,r8 5: bl copy_and_flush /* copy the rest */ diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index b59d75e194a5..2d1cfafd1404 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -44,11 +44,58 @@ SECTIONS * Text, read only data and other permanent read-only sections */ - /* Text and gots */ + _text = .; + _stext = .; + + /* + * Head text. + * This needs to be in its own output section to avoid ld placing + * branch trampoline stubs randomly throughout the fixed sections, + * which it will do (even if the branch comes from another section) + * in order to optimize stub generation. + */ + .head.text : AT(ADDR(.head.text) - LOAD_OFFSET) { +#ifdef CONFIG_PPC64 + KEEP(*(.head.text.first_256B)); +#ifdef CONFIG_PPC_BOOK3E +# define END_FIXED 0x100 +#else + KEEP(*(.head.text.real_vectors)); + *(.head.text.real_trampolines); + KEEP(*(.head.text.virt_vectors)); + *(.head.text.virt_trampolines); +# if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) + KEEP(*(.head.data.fwnmi_page)); +# define END_FIXED 0x8000 +# else +# define END_FIXED 0x7000 +# endif +#endif + ASSERT((. == END_FIXED), "vmlinux.lds.S: fixed section overflow error"); +#else /* !CONFIG_PPC64 */ + HEAD_TEXT +#endif + } :kernel + + /* + * If the build dies here, it's likely code in head_64.S is referencing + * labels it can't reach, and the linker inserting stubs without the + * assembler's knowledge. To debug, remove the above assert and + * rebuild. Look for branch stubs in the fixed section region. + * + * Linker stub generation could be allowed in "trampoline" + * sections if absolutely necessary, but this would require + * some rework of the fixed sections. Before resorting to this, + * consider references that have sufficient addressing range, + * (e.g., hand coded trampolines) so the linker does not have + * to add stubs. + * + * Linker stubs at the top of the main text section are currently not + * detected, and will result in a crash at boot due to offsets being + * wrong. + */ .text : AT(ADDR(.text) - LOAD_OFFSET) { ALIGN_FUNCTION(); - HEAD_TEXT - _text = .; /* careful! __ftr_alt_* sections need to be close to .text */ *(.text .fixup __ftr_alt_* .ref.text) SCHED_TEXT