From: Samuel Thibault Date: Thu, 26 Jun 2014 00:42:20 +0000 (+1000) Subject: input: route kbd LEDs through the generic LEDs layer X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=58810ca005b900313db77717210279dd67d92bdb;p=karo-tx-linux.git input: route kbd LEDs through the generic LEDs layer This permits to reassign keyboard LEDs to something else than keyboard "leds" state, by adding keyboard led and modifier triggers connected to a series of VT input LEDs, themselves connected to VT input triggers, which per-input device LEDs use by default. Userland can thus easily change the LED behavior of (a priori) all input devices, or of particular input devices. This also permits to fix #7063 from userland by using a modifier to implement proper CapsLock behavior and have the keyboard caps lock led show that modifier state. [ebroder@mokafive.com: Rebased to 3.2-rc1 or so, cleaned up some includes, and fixed some constants] [blogic@openwrt.org: CONFIG_INPUT_LEDS stubs should be static inline] [akpm@linux-foundation.org: remove unneeded `extern', fix comment layout] Signed-off-by: Samuel Thibault Signed-off-by: Evan Broder Reviewed-by: David Herrmann Tested-by: Pavel Machek Acked-by: Peter Korsgaard Cc: Pavel Machek Cc: Dmitry Torokhov Cc: Bryan Wu Cc: Arnaud Patard Cc: Sascha Hauer Cc: Matt Sealey Cc: Rob Clark Cc: Niels de Vos Cc: Steev Klimaszewski Signed-off-by: John Crispin Signed-off-by: Andrew Morton --- diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt index 79699c200766..62261c04060a 100644 --- a/Documentation/leds/leds-class.txt +++ b/Documentation/leds/leds-class.txt @@ -2,9 +2,6 @@ LED handling under Linux ======================== -If you're reading this and thinking about keyboard leds, these are -handled by the input subsystem and the led class is *not* needed. - In its simplest form, the LED class just allows control of LEDs from userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the LED is defined in max_brightness file. The brightness file will set the brightness diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index a11ff74a5127..9eac8de9e8b7 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -178,6 +178,15 @@ comment "Input Device Drivers" source "drivers/input/keyboard/Kconfig" +config INPUT_LEDS + bool "LED Support" + depends on LEDS_CLASS = INPUT || LEDS_CLASS = y + select LEDS_TRIGGERS + default y + help + This option enables support for LEDs on keyboards managed + by the input layer. + source "drivers/input/mouse/Kconfig" source "drivers/input/joystick/Kconfig" diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 5ca3f631497f..2ab5f3336da5 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -6,6 +6,9 @@ obj-$(CONFIG_INPUT) += input-core.o input-core-y := input.o input-compat.o input-mt.o ff-core.o +ifeq ($(CONFIG_INPUT_LEDS),y) +input-core-y += leds.o +endif obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o diff --git a/drivers/input/input.c b/drivers/input/input.c index 1c4c0db05550..3b9284b18e70 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -708,6 +708,9 @@ static void input_disconnect_device(struct input_dev *dev) handle->open = 0; spin_unlock_irq(&dev->event_lock); + + if (is_event_supported(EV_LED, dev->evbit, EV_MAX)) + input_led_disconnect(dev); } /** @@ -2134,6 +2137,9 @@ int input_register_device(struct input_dev *dev) list_add_tail(&dev->node, &input_dev_list); + if (is_event_supported(EV_LED, dev->evbit, EV_MAX)) + input_led_connect(dev); + list_for_each_entry(handler, &input_handler_list, node) input_attach_handler(dev, handler); diff --git a/drivers/input/leds.c b/drivers/input/leds.c new file mode 100644 index 000000000000..1d8a980719ab --- /dev/null +++ b/drivers/input/leds.c @@ -0,0 +1,249 @@ +/* + * LED support for the input layer + * + * Copyright 2010-2013 Samuel Thibault + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +/* + * Keyboard LEDs are propagated by default like the following example: + * + * VT keyboard numlock trigger + * -> vt::numl VT LED + * -> vt-numl VT trigger + * -> per-device inputX::numl LED + * + * Userland can however choose the trigger for the vt::numl LED, or + * independently choose the trigger for any inputx::numl LED. + * + * + * VT LED classes and triggers are registered on-demand according to + * existing LED devices + */ + +/* Handler for VT LEDs, just triggers the corresponding VT trigger. */ +static void vt_led_set(struct led_classdev *cdev, + enum led_brightness brightness); +static struct led_classdev vt_leds[LED_CNT] = { +#define DEFINE_INPUT_LED(vt_led, nam, deftrig) \ + [vt_led] = { \ + .name = "vt::"nam, \ + .max_brightness = 1, \ + .brightness_set = vt_led_set, \ + .default_trigger = deftrig, \ + } +/* Default triggers for the VT LEDs just correspond to the legacy + * usage. */ + DEFINE_INPUT_LED(LED_NUML, "numl", "kbd-numlock"), + DEFINE_INPUT_LED(LED_CAPSL, "capsl", "kbd-capslock"), + DEFINE_INPUT_LED(LED_SCROLLL, "scrolll", "kbd-scrollock"), + DEFINE_INPUT_LED(LED_COMPOSE, "compose", NULL), + DEFINE_INPUT_LED(LED_KANA, "kana", "kbd-kanalock"), + DEFINE_INPUT_LED(LED_SLEEP, "sleep", NULL), + DEFINE_INPUT_LED(LED_SUSPEND, "suspend", NULL), + DEFINE_INPUT_LED(LED_MUTE, "mute", NULL), + DEFINE_INPUT_LED(LED_MISC, "misc", NULL), + DEFINE_INPUT_LED(LED_MAIL, "mail", NULL), + DEFINE_INPUT_LED(LED_CHARGING, "charging", NULL), +}; +static const char *const vt_led_names[LED_CNT] = { + [LED_NUML] = "numl", + [LED_CAPSL] = "capsl", + [LED_SCROLLL] = "scrolll", + [LED_COMPOSE] = "compose", + [LED_KANA] = "kana", + [LED_SLEEP] = "sleep", + [LED_SUSPEND] = "suspend", + [LED_MUTE] = "mute", + [LED_MISC] = "misc", + [LED_MAIL] = "mail", + [LED_CHARGING] = "charging", +}; +/* Handler for hotplug initialization */ +static void vt_led_trigger_activate(struct led_classdev *cdev); +/* VT triggers */ +static struct led_trigger vt_led_triggers[LED_CNT] = { +#define DEFINE_INPUT_LED_TRIGGER(vt_led, nam) \ + [vt_led] = { \ + .name = "vt-"nam, \ + .activate = vt_led_trigger_activate, \ + } + DEFINE_INPUT_LED_TRIGGER(LED_NUML, "numl"), + DEFINE_INPUT_LED_TRIGGER(LED_CAPSL, "capsl"), + DEFINE_INPUT_LED_TRIGGER(LED_SCROLLL, "scrolll"), + DEFINE_INPUT_LED_TRIGGER(LED_COMPOSE, "compose"), + DEFINE_INPUT_LED_TRIGGER(LED_KANA, "kana"), + DEFINE_INPUT_LED_TRIGGER(LED_SLEEP, "sleep"), + DEFINE_INPUT_LED_TRIGGER(LED_SUSPEND, "suspend"), + DEFINE_INPUT_LED_TRIGGER(LED_MUTE, "mute"), + DEFINE_INPUT_LED_TRIGGER(LED_MISC, "misc"), + DEFINE_INPUT_LED_TRIGGER(LED_MAIL, "mail"), + DEFINE_INPUT_LED_TRIGGER(LED_CHARGING, "charging"), +}; + +/* Lock for registration coherency */ +static DEFINE_MUTEX(vt_led_registered_lock); + +/* Which VT LED classes and triggers are registered */ +static unsigned long vt_led_registered[BITS_TO_LONGS(LED_CNT)]; + +/* Number of input devices having each LED */ +static int vt_led_references[LED_CNT]; + +/* VT LED state change, tell the VT trigger. */ +static void vt_led_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + int led = cdev - vt_leds; + + led_trigger_event(&vt_led_triggers[led], !!brightness); +} + +/* LED state change for some keyboard, notify that keyboard. */ +static void perdevice_input_led_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct input_dev *dev; + struct led_classdev *leds; + int led; + + dev = cdev->dev->platform_data; + if (!dev) + /* Still initializing */ + return; + leds = dev->leds; + led = cdev - leds; + + input_event(dev, EV_LED, led, !!brightness); + input_event(dev, EV_SYN, SYN_REPORT, 0); +} + +/* Keyboard hotplug, initialize its LED status */ +static void vt_led_trigger_activate(struct led_classdev *cdev) +{ + struct led_trigger *trigger = cdev->trigger; + int led = trigger - vt_led_triggers; + + if (cdev->brightness_set) + cdev->brightness_set(cdev, vt_leds[led].brightness); +} + +/* Free led stuff from input device, used at abortion and disconnection. */ +static void input_led_delete(struct input_dev *dev) +{ + if (dev) { + struct led_classdev *leds = dev->leds; + if (leds) { + int i; + for (i = 0; i < LED_CNT; i++) + kfree(leds[i].name); + kfree(leds); + dev->leds = NULL; + } + } +} + +/* A new input device with potential LEDs to connect. */ +int input_led_connect(struct input_dev *dev) +{ + int i, error = 0; + struct led_classdev *leds; + + dev->leds = leds = kzalloc(sizeof(*leds) * LED_CNT, GFP_KERNEL); + if (!dev->leds) + return -ENOMEM; + + /* lazily register missing VT LEDs */ + mutex_lock(&vt_led_registered_lock); + for (i = 0; i < LED_CNT; i++) + if (vt_leds[i].name && test_bit(i, dev->ledbit)) { + if (!vt_led_references[i]) { + led_trigger_register(&vt_led_triggers[i]); + /* This keyboard is first to have led i, + * try to register it */ + if (!led_classdev_register(NULL, &vt_leds[i])) + vt_led_references[i] = 1; + else + led_trigger_unregister(&vt_led_triggers[i]); + } else + vt_led_references[i]++; + } + mutex_unlock(&vt_led_registered_lock); + + /* and register this device's LEDs */ + for (i = 0; i < LED_CNT; i++) + if (vt_leds[i].name && test_bit(i, dev->ledbit)) { + leds[i].name = kasprintf(GFP_KERNEL, "%s::%s", + dev_name(&dev->dev), + vt_led_names[i]); + if (!leds[i].name) { + error = -ENOMEM; + goto err; + } + leds[i].max_brightness = 1; + leds[i].brightness_set = perdevice_input_led_set; + leds[i].default_trigger = vt_led_triggers[i].name; + } + + /* No issue so far, we can register for real. */ + for (i = 0; i < LED_CNT; i++) + if (leds[i].name) { + led_classdev_register(&dev->dev, &leds[i]); + leds[i].dev->platform_data = dev; + perdevice_input_led_set(&leds[i], + vt_leds[i].brightness); + } + + return 0; + +err: + input_led_delete(dev); + return error; +} + +/* + * Disconnected input device. Clean it, and deregister now-useless VT LEDs and + * triggers. + */ +void input_led_disconnect(struct input_dev *dev) +{ + int i; + struct led_classdev *leds = dev->leds; + + for (i = 0; i < LED_CNT; i++) + if (leds[i].name) + led_classdev_unregister(&leds[i]); + + input_led_delete(dev); + + mutex_lock(&vt_led_registered_lock); + for (i = 0; i < LED_CNT; i++) { + if (!vt_leds[i].name || !test_bit(i, dev->ledbit)) + continue; + + vt_led_references[i]--; + if (vt_led_references[i]) { + /* Still some devices needing it */ + continue; + } + + led_classdev_unregister(&vt_leds[i]); + led_trigger_unregister(&vt_led_triggers[i]); + clear_bit(i, vt_led_registered); + } + mutex_unlock(&vt_led_registered_lock); +} + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("User LED support for input layer"); +MODULE_AUTHOR("Samuel Thibault "); diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index a1b044e7eaad..6784c177eed1 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -11,9 +11,6 @@ menuconfig NEW_LEDS Say Y to enable Linux LED support. This allows control of supported LEDs from both userspace and optionally, by kernel events (triggers). - This is not related to standard keyboard LEDs which are controlled - via the input system. - if NEW_LEDS config LEDS_CLASS diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index b24aa010f68c..65cd80bf9aec 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -13,6 +13,10 @@ config VT bool "Virtual terminal" if EXPERT depends on !S390 && !UML select INPUT + select NEW_LEDS + select LEDS_CLASS + select LEDS_TRIGGERS + select INPUT_LEDS default y ---help--- If you say Y here, you will get support for terminal devices with diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index d0e3a4497707..d6ecfc9e734f 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -130,6 +131,7 @@ static char rep; /* flag telling character repeat */ static int shift_state = 0; static unsigned char ledstate = 0xff; /* undefined */ +static unsigned char lockstate = 0xff; /* undefined */ static unsigned char ledioctl; /* @@ -961,6 +963,41 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag) } } +/* We route VT keyboard "leds" through triggers */ +static void kbd_ledstate_trigger_activate(struct led_classdev *cdev); + +static struct led_trigger ledtrig_ledstate[] = { +#define DEFINE_LEDSTATE_TRIGGER(kbd_led, nam) \ + [kbd_led] = { \ + .name = nam, \ + .activate = kbd_ledstate_trigger_activate, \ + } + DEFINE_LEDSTATE_TRIGGER(VC_SCROLLOCK, "kbd-scrollock"), + DEFINE_LEDSTATE_TRIGGER(VC_NUMLOCK, "kbd-numlock"), + DEFINE_LEDSTATE_TRIGGER(VC_CAPSLOCK, "kbd-capslock"), + DEFINE_LEDSTATE_TRIGGER(VC_KANALOCK, "kbd-kanalock"), +#undef DEFINE_LEDSTATE_TRIGGER +}; + +static void kbd_lockstate_trigger_activate(struct led_classdev *cdev); + +static struct led_trigger ledtrig_lockstate[] = { +#define DEFINE_LOCKSTATE_TRIGGER(kbd_led, nam) \ + [kbd_led] = { \ + .name = nam, \ + .activate = kbd_lockstate_trigger_activate, \ + } + DEFINE_LOCKSTATE_TRIGGER(VC_SHIFTLOCK, "kbd-shiftlock"), + DEFINE_LOCKSTATE_TRIGGER(VC_ALTGRLOCK, "kbd-altgrlock"), + DEFINE_LOCKSTATE_TRIGGER(VC_CTRLLOCK, "kbd-ctrllock"), + DEFINE_LOCKSTATE_TRIGGER(VC_ALTLOCK, "kbd-altlock"), + DEFINE_LOCKSTATE_TRIGGER(VC_SHIFTLLOCK, "kbd-shiftllock"), + DEFINE_LOCKSTATE_TRIGGER(VC_SHIFTRLOCK, "kbd-shiftrlock"), + DEFINE_LOCKSTATE_TRIGGER(VC_CTRLLLOCK, "kbd-ctrlllock"), + DEFINE_LOCKSTATE_TRIGGER(VC_CTRLRLOCK, "kbd-ctrlrlock"), +#undef DEFINE_LOCKSTATE_TRIGGER +}; + /* * The leds display either (i) the status of NumLock, CapsLock, ScrollLock, * or (ii) whatever pattern of lights people want to show using KDSETLED, @@ -995,18 +1032,25 @@ static inline unsigned char getleds(void) return kbd->ledflagstate; } -static int kbd_update_leds_helper(struct input_handle *handle, void *data) +/* Called on trigger connection, to set initial state */ +static void kbd_ledstate_trigger_activate(struct led_classdev *cdev) { - unsigned char leds = *(unsigned char *)data; + struct led_trigger *trigger = cdev->trigger; + int led = trigger - ledtrig_ledstate; - if (test_bit(EV_LED, handle->dev->evbit)) { - input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01)); - input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02)); - input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04)); - input_inject_event(handle, EV_SYN, SYN_REPORT, 0); - } + tasklet_disable(&keyboard_tasklet); + led_trigger_event(trigger, ledstate & (1 << led) ? LED_FULL : LED_OFF); + tasklet_enable(&keyboard_tasklet); +} - return 0; +static void kbd_lockstate_trigger_activate(struct led_classdev *cdev) +{ + struct led_trigger *trigger = cdev->trigger; + int led = trigger - ledtrig_lockstate; + + tasklet_disable(&keyboard_tasklet); + led_trigger_event(trigger, lockstate & (1 << led) ? LED_FULL : LED_OFF); + tasklet_enable(&keyboard_tasklet); } /** @@ -1095,16 +1139,29 @@ static void kbd_bh(unsigned long dummy) { unsigned char leds; unsigned long flags; - + int i; + spin_lock_irqsave(&led_lock, flags); leds = getleds(); spin_unlock_irqrestore(&led_lock, flags); if (leds != ledstate) { - input_handler_for_each_handle(&kbd_handler, &leds, - kbd_update_leds_helper); + for (i = 0; i < ARRAY_SIZE(ledtrig_ledstate); i++) + if ((leds ^ ledstate) & (1 << i)) + led_trigger_event(&ledtrig_ledstate[i], + leds & (1 << i) + ? LED_FULL : LED_OFF); ledstate = leds; } + + if (kbd->lockstate != lockstate) { + for (i = 0; i < ARRAY_SIZE(ledtrig_lockstate); i++) + if ((kbd->lockstate ^ lockstate) & (1 << i)) + led_trigger_event(&ledtrig_lockstate[i], + kbd->lockstate & (1 << i) + ? LED_FULL : LED_OFF); + lockstate = kbd->lockstate; + } } DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0); @@ -1442,20 +1499,6 @@ static void kbd_disconnect(struct input_handle *handle) kfree(handle); } -/* - * Start keyboard handler on the new keyboard by refreshing LED state to - * match the rest of the system. - */ -static void kbd_start(struct input_handle *handle) -{ - tasklet_disable(&keyboard_tasklet); - - if (ledstate != 0xff) - kbd_update_leds_helper(handle, &ledstate); - - tasklet_enable(&keyboard_tasklet); -} - static const struct input_device_id kbd_ids[] = { { .flags = INPUT_DEVICE_ID_MATCH_EVBIT, @@ -1477,7 +1520,6 @@ static struct input_handler kbd_handler = { .match = kbd_match, .connect = kbd_connect, .disconnect = kbd_disconnect, - .start = kbd_start, .name = "kbd", .id_table = kbd_ids, }; @@ -1501,6 +1543,20 @@ int __init kbd_init(void) if (error) return error; + for (i = 0; i < ARRAY_SIZE(ledtrig_ledstate); i++) { + error = led_trigger_register(&ledtrig_ledstate[i]); + if (error) + pr_err("error %d while registering trigger %s\n", + error, ledtrig_ledstate[i].name); + } + + for (i = 0; i < ARRAY_SIZE(ledtrig_lockstate); i++) { + error = led_trigger_register(&ledtrig_lockstate[i]); + if (error) + pr_err("error %d while registering trigger %s\n", + error, ledtrig_lockstate[i].name); + } + tasklet_enable(&keyboard_tasklet); tasklet_schedule(&keyboard_tasklet); diff --git a/include/linux/input.h b/include/linux/input.h index 82ce323b9986..6453b22372ac 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -79,6 +79,7 @@ struct input_value { * @led: reflects current state of device's LEDs * @snd: reflects current state of sound effects * @sw: reflects current state of device's switches + * @leds: leds objects for the device's LEDs * @open: this method is called when the very first user calls * input_open_device(). The driver must prepare the device * to start generating events (start polling thread, @@ -164,6 +165,8 @@ struct input_dev { unsigned long snd[BITS_TO_LONGS(SND_CNT)]; unsigned long sw[BITS_TO_LONGS(SW_CNT)]; + struct led_classdev *leds; + int (*open)(struct input_dev *dev); void (*close)(struct input_dev *dev); int (*flush)(struct input_dev *dev, struct file *file); @@ -531,4 +534,22 @@ int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file); int input_ff_create_memless(struct input_dev *dev, void *data, int (*play_effect)(struct input_dev *, void *, struct ff_effect *)); +#ifdef CONFIG_INPUT_LEDS + +int input_led_connect(struct input_dev *dev); +void input_led_disconnect(struct input_dev *dev); + +#else + +static inline int input_led_connect(struct input_dev *dev) +{ + return 0; +} + +static inline void input_led_disconnect(struct input_dev *dev) +{ +} + +#endif + #endif