From: Brian Norris <computersforpeace@gmail.com>
Date: Wed, 2 May 2012 17:15:02 +0000 (-0700)
Subject: mtd: gpmi-nand: utilize oob_requested parameter
X-Git-Tag: v3.0.35-fsl~488
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=58a217ccbfb25c905dcc061b971de56724b05abd;p=karo-tx-linux.git

mtd: gpmi-nand: utilize oob_requested parameter

Don't read OOB if the caller didn't request it.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Huang Shijie <b32955@freescale.com>
---

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index b9d16c9bdf74..e9e8d1c09ba5 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -939,22 +939,25 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		mtd->ecc_stats.corrected += corrected;
 	}
 
-	/*
-	 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
-	 * details about our policy for delivering the OOB.
-	 *
-	 * We fill the caller's buffer with set bits, and then copy the block
-	 * mark to th caller's buffer. Note that, if block mark swapping was
-	 * necessary, it has already been done, so we can rely on the first
-	 * byte of the auxiliary buffer to contain the block mark.
-	 */
-	memset(chip->oob_poi, ~0, mtd->oobsize);
-	chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+	if (oob_required) {
+		/*
+		 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()
+		 * for details about our policy for delivering the OOB.
+		 *
+		 * We fill the caller's buffer with set bits, and then copy the
+		 * block mark to th caller's buffer. Note that, if block mark
+		 * swapping was necessary, it has already been done, so we can
+		 * rely on the first byte of the auxiliary buffer to contain
+		 * the block mark.
+		 */
+		memset(chip->oob_poi, ~0, mtd->oobsize);
+		chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
 
-	read_page_swap_end(this, buf, mtd->writesize,
-			this->payload_virt, this->payload_phys,
-			nfc_geo->payload_size,
-			payload_virt, payload_phys);
+		read_page_swap_end(this, buf, mtd->writesize,
+				this->payload_virt, this->payload_phys,
+				nfc_geo->payload_size,
+				payload_virt, payload_phys);
+	}
 exit_nfc:
 	return ret;
 }