From: Lars-Peter Clausen Date: Fri, 10 Aug 2012 16:36:00 +0000 (+0100) Subject: staging:iio:ad7192: Report channel offset X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=58cdff6ee71b4ea00a6b822a52ebf9ceb0b6a7d5;p=linux-beck.git staging:iio:ad7192: Report channel offset In bipolar mode there is a a binary offset of 2**(N-1) (with N being the number of bits) on the reported value. Currently this value is subtracted when doing a manual read. While this works for manual channel readings it does not work for buffered mode. So report the offset in the channels offset property, which will work in both modes. Signed-off-by: Lars-Peter Clausen --- diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 7ba699486326..73483d26a034 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -826,8 +826,6 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, switch (chan->type) { case IIO_VOLTAGE: - if (!unipolar) - *val -= (1 << (chan->scan_type.realbits - 1)); break; case IIO_TEMP: *val -= 0x800000; @@ -853,6 +851,12 @@ static int ad7192_read_raw(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_CHAN_INFO_OFFSET: + if (!unipolar) + *val -= (1 << (chan->scan_type.realbits - 1)); + else + *val = 0; + return IIO_VAL_INT; } return -EINVAL; @@ -942,7 +946,8 @@ static const struct iio_info ad7195_info = { .channel = _chan, \ .channel2 = _chan2, \ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ .scan_type = IIO_ST('u', 24, 32, 0)} @@ -952,7 +957,8 @@ static const struct iio_info ad7195_info = { .indexed = 1, \ .channel = _chan, \ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ - IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + IIO_CHAN_INFO_OFFSET_SHARED_BIT, \ .address = _address, \ .scan_index = _si, \ .scan_type = IIO_ST('u', 24, 32, 0)}