From: Heiner Kallweit Date: Fri, 24 Jun 2016 05:39:04 +0000 (-0300) Subject: [media] media: rc: nuvoton: clean up initialization of wakeup registers X-Git-Tag: v4.8-rc1~152^2~131 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=594ccee6f09bc5253dbeddcc7904f0b7509f00f9;p=karo-tx-linux.git [media] media: rc: nuvoton: clean up initialization of wakeup registers The registers defining wakeup sequence handling are set when the wakeup sequence is set via sysfs. There's no need to initialize them otherwise. Signed-off-by: Heiner Kallweit Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index 25f9affd7329..c16515f347b9 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -564,34 +564,15 @@ static void nvt_cir_regs_init(struct nvt_dev *nvt) static void nvt_cir_wake_regs_init(struct nvt_dev *nvt) { - /* set number of bytes needed for wake from s3 (default 65) */ - nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_CMP_BYTES, - CIR_WAKE_FIFO_CMP_DEEP); - - /* set tolerance/variance allowed per byte during wake compare */ - nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE, - CIR_WAKE_FIFO_CMP_TOL); - - /* set sample limit count (PE interrupt raised when reached) */ - nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_WAKE_SLCH); - nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_WAKE_SLCL); - - /* set cir wake fifo rx trigger level (currently 67) */ - nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV, - CIR_WAKE_FIFOCON); - /* - * Enable TX and RX, specific carrier on = low, off = high, and set - * sample period (currently 50us) + * Disable RX, set specific carrier on = low, off = high, + * and sample period (currently 50us) */ - nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN | + nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV | CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL, CIR_WAKE_IRCON); - /* clear cir wake rx fifo */ - nvt_clear_cir_wake_fifo(nvt); - /* clear any and all stray interrupts */ nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);