From: Felix Fietkau Date: Sat, 19 Mar 2011 12:55:42 +0000 (+0100) Subject: ath9k_hw: force rx chainmask to 7 on AR9100 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=598cdd5246ea158310942699e5008ac7f687ad62;p=linux-beck.git ath9k_hw: force rx chainmask to 7 on AR9100 Most AR9100 devices already have a chainmask of 7 (three antennas), however on the ones that don't (rx and tx chainmask set to 5), problems with IQ mismatch calibration have been observed. This shows up as tx queue hangs (and subsequent hardware resets) if traffic is sent during this type of calibration. Forcing the rx chainmask to 7 fixes the calibration issues with no apparent negative side effects on throughput and stability. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 175c36f3fdac..8b8656898dfe 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1869,6 +1869,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) !(AR_SREV_9271(ah))) /* CB71: GPIO 0 is pulled down to indicate 3 rx chains */ pCap->rx_chainmask = ath9k_hw_gpio_get(ah, 0) ? 0x5 : 0x7; + else if (AR_SREV_9100(ah)) + pCap->rx_chainmask = 0x7; else /* Use rx_chainmask from EEPROM. */ pCap->rx_chainmask = ah->eep_ops->get_eeprom(ah, EEP_RX_MASK);