From: Kalle Jokiniemi <kalle.jokiniemi@digia.com>
Date: Thu, 29 Oct 2009 08:30:20 +0000 (+0200)
Subject: OMAP3: RX-51: Pass cpu idle parameters
X-Git-Tag: v2.6.34-rc1~230^2~9^2~2
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5a1b1d3a9efad6bd53d01ff02e86626d1a51d697;p=karo-tx-linux.git

OMAP3: RX-51: Pass cpu idle parameters

Pass cpuidle parameters for RX-51. Numbers based on
measurements made in October 2009 for PM optimized
kernel with CPU freq enabled. Assumes OPP2 (main
idle OPP, and worst case latencies).

Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---

diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 26b70dab28cc..acfb898a3aad 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -31,6 +31,7 @@
 #include <plat/usb.h>
 
 #include "mux.h"
+#include "pm.h"
 
 #define RX51_GPIO_SLEEP_IND 162
 
@@ -56,6 +57,23 @@ static struct platform_device leds_gpio = {
 	},
 };
 
+static struct cpuidle_params rx51_cpuidle_params[] = {
+	/* C1 */
+	{1, 110, 162, 5},
+	/* C2 */
+	{1, 106, 180, 309},
+	/* C3 */
+	{0, 107, 410, 46057},
+	/* C4 */
+	{0, 121, 3374, 46057},
+	/* C5 */
+	{1, 855, 1146, 46057},
+	/* C6 */
+	{0, 7580, 4134, 484329},
+	/* C7 */
+	{1, 7505, 15274, 484329},
+};
+
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
 };
@@ -85,6 +103,7 @@ static void __init rx51_init_irq(void)
 
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
+	omap3_pm_init_cpuidle(rx51_cpuidle_params);
 	sdrc_params = rx51_get_sdram_timings();
 	omap2_init_common_hw(sdrc_params, sdrc_params);
 	omap_init_irq();