From: Gerard CAUVY Date: Thu, 24 May 2012 09:47:36 +0000 (+0300) Subject: usb: dwc3: gadget: move AcceptU1Ena and AcceptU2Ena to Reset IRQ X-Git-Tag: next-20120724~22^2~53^2~27^2~28 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5cbe8c220c1e126dd0855ad57fe4491b267132b9;p=karo-tx-linux.git usb: dwc3: gadget: move AcceptU1Ena and AcceptU2Ena to Reset IRQ According to the databook, the DWC3 Core will reset those bits to 0 on USB Bus Reset. This means we must re-enable those bits on every reset interrupt. Because we will always get a Reset interrupt after loading a gadget driver, we can, instead of re-enabling something that was just lost, move the handling of those bits to the Reset Interrupt. This patch fixes USB30CV U1/U2 Test. Signed-off-by: Gerard CAUVY Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 054ee5ec5c13..a9fc7c4a5a20 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2006,6 +2006,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_TSTCTRL_MASK; reg &= ~(DWC3_DCTL_INITU1ENA | DWC3_DCTL_INITU2ENA); + reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA); dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc->test_mode = false; @@ -2410,10 +2411,6 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc) reg |= DWC3_DCFG_LPM_CAP; dwc3_writel(dwc->regs, DWC3_DCFG, reg); - reg = dwc3_readl(dwc->regs, DWC3_DCTL); - reg |= DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA; - dwc3_writel(dwc->regs, DWC3_DCTL, reg); - /* Enable all but Start and End of Frame IRQs */ reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN | DWC3_DEVTEN_EVNTOVERFLOWEN |