From: John Stultz Date: Wed, 24 Mar 2010 00:22:36 +0000 (+0000) Subject: ARM: convert arm to arch_gettimeoffset() X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5cfc8ee0bb51;p=linux-beck.git ARM: convert arm to arch_gettimeoffset() Convert arm to use GENERIC_TIME via the arch_getoffset() infrastructure, reducing the amount of arch specific code we need to maintain. The arm architecture is the last arch that need to be converted. Signed-off-by: John Stultz Signed-off-by: Russell King Cc: Andrew Morton --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bcaa8c83e522..bf856f492eb5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -42,6 +42,11 @@ config GENERIC_GPIO config GENERIC_TIME bool + default y + +config ARCH_USES_GETTIMEOFFSET + bool + default n config GENERIC_CLOCKEVENTS bool @@ -231,6 +236,7 @@ config ARCH_AAEC2000 select CPU_ARM920T select ARM_AMBA select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Agilent AAEC-2000 @@ -271,6 +277,7 @@ config ARCH_AT91 select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -290,6 +297,7 @@ config ARCH_BCMRING config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x-based" select CPU_ARM720T + select ARCH_USES_GETTIMEOFFSET help Support for Cirrus Logic 711x/721x based boards. @@ -298,6 +306,7 @@ config ARCH_GEMINI select CPU_FA526 select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET help Support for the Cortina Systems Gemini family SoCs @@ -306,6 +315,7 @@ config ARCH_EBSA110 select CPU_SA110 select ISA select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -321,6 +331,7 @@ config ARCH_EP93XX select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_USES_GETTIMEOFFSET help This enables support for the Cirrus EP93xx series of CPUs. @@ -328,6 +339,7 @@ config ARCH_FOOTBRIDGE bool "FootBridge" select CPU_SA110 select FOOTBRIDGE + select ARCH_USES_GETTIMEOFFSET help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -366,6 +378,7 @@ config ARCH_H720X bool "Hynix HMS720x-based" select CPU_ARM720T select ISA_DMA_API + select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Hynix HMS720x @@ -408,6 +421,7 @@ config ARCH_IXP23XX depends on MMU select CPU_XSC3 select PCI + select ARCH_USES_GETTIMEOFFSET help Support for Intel's IXP23xx (XScale) family of processors. @@ -416,6 +430,7 @@ config ARCH_IXP2000 depends on MMU select CPU_XSCALE select PCI + select ARCH_USES_GETTIMEOFFSET help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -434,6 +449,7 @@ config ARCH_L7200 bool "LinkUp-L7200" select CPU_ARM720T select FIQ + select ARCH_USES_GETTIMEOFFSET help Say Y here if you intend to run this kernel on a LinkUp Systems L7200 Software Development Board which uses an ARM720T processor. @@ -523,6 +539,7 @@ config ARCH_KS8695 select CPU_ARM922T select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -569,6 +586,7 @@ config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T select COMMON_CLKDEV + select ARCH_USES_GETTIMEOFFSET help This enables support for Philips PNX4008 mobile platform. @@ -613,6 +631,7 @@ config ARCH_RPC select ISA_DMA_API select NO_IOPORT select ARCH_SPARSEMEM_ENABLE + select ARCH_USES_GETTIMEOFFSET help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -639,6 +658,7 @@ config ARCH_S3C2410 select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (), the IPAQ 1940 or @@ -652,6 +672,7 @@ config ARCH_S3C64XX select ARM_VIC select HAVE_CLK select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select SAMSUNG_CLKSRC @@ -708,6 +729,7 @@ config ARCH_SHARK select ISA_DMA select ZONE_DMA select PCI + select ARCH_USES_GETTIMEOFFSET help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (). @@ -717,6 +739,7 @@ config ARCH_LH7A40X select CPU_ARM922T select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM + select ARCH_USES_GETTIMEOFFSET help Say Y here for systems based on one of the Sharp LH7A40X System on a Chip processors. These CPUs include an ARM922T diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h index 8bffc3ff3acf..35d408f6dccf 100644 --- a/arch/arm/include/asm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -38,7 +38,7 @@ struct sys_timer { void (*init)(void); void (*suspend)(void); void (*resume)(void); -#ifndef CONFIG_GENERIC_TIME +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET unsigned long (*offset)(void); #endif }; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 28753805d2d1..38c261f9951c 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -72,12 +72,15 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); #endif -#ifndef CONFIG_GENERIC_TIME -static unsigned long dummy_gettimeoffset(void) +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET +u32 arch_gettimeoffset(void) { + if (system_timer->offset != NULL) + return system_timer->offset() * 1000; + return 0; } -#endif +#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ #ifdef CONFIG_LEDS_TIMER static inline void do_leds(void) @@ -93,63 +96,6 @@ static inline void do_leds(void) #define do_leds() #endif -#ifndef CONFIG_GENERIC_TIME -void do_gettimeofday(struct timeval *tv) -{ - unsigned long flags; - unsigned long seq; - unsigned long usec, sec; - - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = system_timer->offset(); - sec = xtime.tv_sec; - usec += xtime.tv_nsec / 1000; - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - - /* usec may have gone up a lot: be safe */ - while (usec >= 1000000) { - usec -= 1000000; - sec++; - } - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -EXPORT_SYMBOL(do_gettimeofday); - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, sec = tv->tv_sec; - long wtm_nsec, nsec = tv->tv_nsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irq(&xtime_lock); - /* - * This is revolting. We need to set "xtime" correctly. However, the - * value in this location is the value at the most recent update of - * wall time. Discover what correction gettimeofday() would have - * done, and then undo it! - */ - nsec -= system_timer->offset() * NSEC_PER_USEC; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); - - set_normalized_timespec(&xtime, sec, nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); -#endif /* !CONFIG_GENERIC_TIME */ #ifndef CONFIG_GENERIC_CLOCKEVENTS /* @@ -214,10 +160,6 @@ device_initcall(timer_init_sysfs); void __init time_init(void) { -#ifndef CONFIG_GENERIC_TIME - if (system_timer->offset == NULL) - system_timer->offset = dummy_gettimeoffset; -#endif system_timer->init(); } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2db43a5ddd9b..8a5e8e9fe448 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -97,6 +97,7 @@ config ARCH_AT572D940HF config ARCH_AT91X40 bool "AT91x40" + select ARCH_USES_GETTIMEOFFSET endchoice