From: Felix Fietkau Date: Mon, 26 Apr 2010 19:04:40 +0000 (-0400) Subject: ath9k_hw: fix noisefloor timeout handling on AR9003 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5d5d44d914623b6122f050ec900ea4016aa3a993;p=linux-beck.git ath9k_hw: fix noisefloor timeout handling on AR9003 When the noisefloor calibration times out, do not load -50 into the registers, since this might cause rx issues. Instead, leave enough time for the noise floor calibration to complete until the next check. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 806f4a54b620..80431a2f6dc1 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1093,6 +1093,7 @@ static void ar9003_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) ath_print(common, ATH_DBG_ANY, "Timeout while waiting for nf " "to load: AR_PHY_AGC_CONTROL=0x%x\n", REG_READ(ah, AR_PHY_AGC_CONTROL)); + return; } /*