From: Paulo Zanoni Date: Fri, 5 Oct 2012 15:05:56 +0000 (-0300) Subject: drm/i915: add proper CPU/PCH checks to crtc_mode_set functions X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5dc5298bb3e5;p=linux-beck.git drm/i915: add proper CPU/PCH checks to crtc_mode_set functions On ironlake_crtc_mode_set, WARN if not using IBX or CPT. On haswell_crtc_mode_set, only run IBX/CPT code on IBX/CPT. I am still not sure whether IBX/CPT will be possible with a Haswell CPU, so leave the code there for now and put a WARN in case we spot it. Signed-off-by: Paulo Zanoni Reviewed-by: Damien Lespiau Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ef8913246477..213831f57ef1 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5002,6 +5002,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, num_connectors++; } + WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)), + "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev)); + ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock, &has_reduced_clock, &reduced_clock); if (!ok) { @@ -5027,12 +5030,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); drm_mode_debug_printmodeline(mode); - /* CPU eDP is the only output that doesn't need a PCH PLL of its own on - * pre-Haswell/LPT generation */ - if (HAS_PCH_LPT(dev)) { - DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n", - pipe); - } else if (!is_cpu_edp) { + /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */ + if (!is_cpu_edp) { struct intel_pch_pll *pll; pll = intel_get_pch_pll(intel_crtc, dpll, fp); @@ -5155,7 +5154,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, int plane = intel_crtc->plane; int num_connectors = 0; intel_clock_t clock, reduced_clock; - u32 dpll, fp = 0, fp2 = 0; + u32 dpll = 0, fp = 0, fp2 = 0; bool ok, has_reduced_clock = false; bool is_lvds = false, is_dp = false, is_cpu_edp = false; struct intel_encoder *encoder; @@ -5181,11 +5180,21 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, num_connectors++; } - ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock, - &has_reduced_clock, &reduced_clock); - if (!ok) { - DRM_ERROR("Couldn't find PLL settings for mode!\n"); - return -EINVAL; + /* We are not sure yet this won't happen. */ + WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n", + INTEL_PCH_TYPE(dev)); + + WARN(num_connectors != 1, "%d connectors attached to pipe %c\n", + num_connectors, pipe_name(pipe)); + + if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { + ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock, + &has_reduced_clock, + &reduced_clock); + if (!ok) { + DRM_ERROR("Couldn't find PLL settings for mode!\n"); + return -EINVAL; + } } /* Ensure that the cursor is valid for the new mode before changing... */ @@ -5196,104 +5205,112 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, if (is_lvds && dev_priv->lvds_dither) dither = true; - fp = clock.n << 16 | clock.m1 << 8 | clock.m2; - if (has_reduced_clock) - fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | - reduced_clock.m2; - - dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, fp); - DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); drm_mode_debug_printmodeline(mode); - /* CPU eDP is the only output that doesn't need a PCH PLL of its own on - * pre-Haswell/LPT generation */ - if (HAS_PCH_LPT(dev)) { - DRM_DEBUG_KMS("LPT detected: no PLL for pipe %d necessary\n", - pipe); - } else if (!is_cpu_edp) { - struct intel_pch_pll *pll; + if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { + fp = clock.n << 16 | clock.m1 << 8 | clock.m2; + if (has_reduced_clock) + fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | + reduced_clock.m2; + + dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock, + fp); + + /* CPU eDP is the only output that doesn't need a PCH PLL of its + * own on pre-Haswell/LPT generation */ + if (!is_cpu_edp) { + struct intel_pch_pll *pll; + + pll = intel_get_pch_pll(intel_crtc, dpll, fp); + if (pll == NULL) { + DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n", + pipe); + return -EINVAL; + } + } else + intel_put_pch_pll(intel_crtc); - pll = intel_get_pch_pll(intel_crtc, dpll, fp); - if (pll == NULL) { - DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n", - pipe); - return -EINVAL; - } - } else - intel_put_pch_pll(intel_crtc); + /* The LVDS pin pair needs to be on before the DPLLs are + * enabled. This is an exception to the general rule that + * mode_set doesn't turn things on. + */ + if (is_lvds) { + temp = I915_READ(PCH_LVDS); + temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; + if (HAS_PCH_CPT(dev)) { + temp &= ~PORT_TRANS_SEL_MASK; + temp |= PORT_TRANS_SEL_CPT(pipe); + } else { + if (pipe == 1) + temp |= LVDS_PIPEB_SELECT; + else + temp &= ~LVDS_PIPEB_SELECT; + } - /* The LVDS pin pair needs to be on before the DPLLs are enabled. - * This is an exception to the general rule that mode_set doesn't turn - * things on. - */ - if (is_lvds) { - temp = I915_READ(PCH_LVDS); - temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (HAS_PCH_CPT(dev)) { - temp &= ~PORT_TRANS_SEL_MASK; - temp |= PORT_TRANS_SEL_CPT(pipe); - } else { - if (pipe == 1) - temp |= LVDS_PIPEB_SELECT; + /* set the corresponsding LVDS_BORDER bit */ + temp |= dev_priv->lvds_border_bits; + /* Set the B0-B3 data pairs corresponding to whether + * we're going to set the DPLLs for dual-channel mode or + * not. + */ + if (clock.p2 == 7) + temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else - temp &= ~LVDS_PIPEB_SELECT; + temp &= ~(LVDS_B0B3_POWER_UP | + LVDS_CLKB_POWER_UP); + + /* It would be nice to set 24 vs 18-bit mode + * (LVDS_A3_POWER_UP) appropriately here, but we need to + * look more thoroughly into how panels behave in the + * two modes. + */ + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) + temp |= LVDS_HSYNC_POLARITY; + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) + temp |= LVDS_VSYNC_POLARITY; + I915_WRITE(PCH_LVDS, temp); } - - /* set the corresponsding LVDS_BORDER bit */ - temp |= dev_priv->lvds_border_bits; - /* Set the B0-B3 data pairs corresponding to whether we're going to - * set the DPLLs for dual-channel mode or not. - */ - if (clock.p2 == 7) - temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; - else - temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); - - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) - * appropriately here, but we need to look more thoroughly into how - * panels behave in the two modes. - */ - temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - temp |= LVDS_HSYNC_POLARITY; - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - temp |= LVDS_VSYNC_POLARITY; - I915_WRITE(PCH_LVDS, temp); } if (is_dp && !is_cpu_edp) { intel_dp_set_m_n(crtc, mode, adjusted_mode); } else { - /* For non-DP output, clear any trans DP clock recovery setting.*/ - I915_WRITE(TRANSDATA_M1(pipe), 0); - I915_WRITE(TRANSDATA_N1(pipe), 0); - I915_WRITE(TRANSDPLINK_M1(pipe), 0); - I915_WRITE(TRANSDPLINK_N1(pipe), 0); - } - - if (intel_crtc->pch_pll) { - I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(intel_crtc->pch_pll->pll_reg); - udelay(150); - - /* The pixel multiplier can only be updated once the - * DPLL is enabled and the clocks are stable. - * - * So write it again. - */ - I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); + if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { + /* For non-DP output, clear any trans DP clock recovery + * setting.*/ + I915_WRITE(TRANSDATA_M1(pipe), 0); + I915_WRITE(TRANSDATA_N1(pipe), 0); + I915_WRITE(TRANSDPLINK_M1(pipe), 0); + I915_WRITE(TRANSDPLINK_N1(pipe), 0); + } } intel_crtc->lowfreq_avail = false; - if (intel_crtc->pch_pll) { - if (is_lvds && has_reduced_clock && i915_powersave) { - I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2); - intel_crtc->lowfreq_avail = true; - } else { - I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp); + if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) { + if (intel_crtc->pch_pll) { + I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(intel_crtc->pch_pll->pll_reg); + udelay(150); + + /* The pixel multiplier can only be updated once the + * DPLL is enabled and the clocks are stable. + * + * So write it again. + */ + I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); + } + + if (intel_crtc->pch_pll) { + if (is_lvds && has_reduced_clock && i915_powersave) { + I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2); + intel_crtc->lowfreq_avail = true; + } else { + I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp); + } } } @@ -5301,8 +5318,9 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, ironlake_set_m_n(crtc, mode, adjusted_mode); - if (is_cpu_edp) - ironlake_set_pll_edp(crtc, adjusted_mode->clock); + if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) + if (is_cpu_edp) + ironlake_set_pll_edp(crtc, adjusted_mode->clock); ironlake_set_pipeconf(crtc, adjusted_mode, dither);