From: Antti Palosaari Date: Sun, 14 Dec 2014 19:39:37 +0000 (-0300) Subject: [media] rtl2832: remove unneeded software reset from init() X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5e5d52a00fe8b114551a05379ac446497738df7d;p=linux-beck.git [media] rtl2832: remove unneeded software reset from init() There is no need to do software reset on init() as it is done a bit later on end of set_frontend(). Software reset usually means restarting (resetting to starting point) chip internal state machine (FSM). Naturally it is done after all parameters are programmed. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb-frontends/rtl2832.c b/drivers/media/dvb-frontends/rtl2832.c index 66f915dd24a6..db0178717f2d 100644 --- a/drivers/media/dvb-frontends/rtl2832.c +++ b/drivers/media/dvb-frontends/rtl2832.c @@ -434,21 +434,6 @@ static int rtl2832_init(struct dvb_frontend *fe) goto err; } - /* - * r820t NIM code does a software reset here at the demod - - * may not be needed, as there's already a software reset at - * set_params() - */ -#if 1 - /* soft reset */ - ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1); - if (ret) - goto err; - - ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0); - if (ret) - goto err; -#endif /* init stats here in order signal app which stats are supported */ c->strength.len = 1; c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;