From: Paul Burton Date: Sun, 24 May 2015 15:11:20 +0000 (+0100) Subject: devicetree: document Ingenic SoC interrupt controller binding X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5f408ebfd2f3fa791449c0d641254f795747c081;p=linux-beck.git devicetree: document Ingenic SoC interrupt controller binding Add binding documentation for Ingenic SoC interrupt controllers. Signed-off-by: Paul Burton Acked-by: Rob Herring Cc: Ian Campbell Cc: Jason Cooper Cc: Kumar Gala Cc: Lars-Peter Clausen Cc: Mark Rutland Cc: Pawel Moll Cc: Thomas Gleixner Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10134/ Signed-off-by: Ralf Baechle --- diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt new file mode 100644 index 000000000000..5f89fb635a1b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt @@ -0,0 +1,28 @@ +Ingenic SoC Interrupt Controller + +Required properties: + +- compatible : should be "ingenic,-intc". Valid strings are: + ingenic,jz4740-intc + ingenic,jz4770-intc + ingenic,jz4775-intc + ingenic,jz4780-intc +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. +- interrupt-parent : phandle of the CPU interrupt controller. +- interrupts : Specifies the CPU interrupt the controller is connected to. + +Example: + +intc: interrupt-controller@10001000 { + compatible = "ingenic,jz4740-intc"; + reg = <0x10001000 0x14>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; +};