From: H. Peter Anvin Date: Fri, 8 May 2009 22:45:17 +0000 (-0700) Subject: x86, boot: stylistic cleanups for boot/compressed/head_32.S X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5f64ec64e7f9b246c0a94f34cdf7782f98a6e55d;p=mv-sheeva.git x86, boot: stylistic cleanups for boot/compressed/head_32.S Reformat arch/x86/boot/compressed/head_32.S to be closer to currently preferred kernel assembly style, that is: - opcode and operand separated by tab - operands separated by ", " - C-style comments This also makes it more similar to head_64.S. [ Impact: cleanup, no object code change ] Signed-off-by: H. Peter Anvin --- diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index e3398f3d1b3..7bd7766ffab 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -12,16 +12,16 @@ * the page directory. [According to comments etc elsewhere on a compressed * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] * - * Page 0 is deliberately kept safe, since System Management Mode code in + * Page 0 is deliberately kept safe, since System Management Mode code in * laptops may need to access the BIOS data stored there. This is also - * useful for future device drivers that either access the BIOS via VM86 + * useful for future device drivers that either access the BIOS via VM86 * mode. */ /* * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ -.text + .text #include #include @@ -29,75 +29,80 @@ #include #include -.section ".text.head","ax",@progbits + .section ".text.head","ax",@progbits ENTRY(startup_32) cld - /* test KEEP_SEGMENTS flag to see if the bootloader is asking - * us to not reload segments */ - testb $(1<<6), BP_loadflags(%esi) - jnz 1f + /* + * Test KEEP_SEGMENTS flag to see if the bootloader is asking + * us to not reload segments + */ + testb $(1<<6), BP_loadflags(%esi) + jnz 1f cli - movl $(__BOOT_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - movl %eax,%ss + movl $__BOOT_DS, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %fs + movl %eax, %gs + movl %eax, %ss 1: -/* Calculate the delta between where we were compiled to run +/* + * Calculate the delta between where we were compiled to run * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode * data at 0x1e4 (defined as a scratch field) are used as the stack * for this calculation. Only 4 bytes are needed. */ - leal (BP_scratch+4)(%esi), %esp - call 1f -1: popl %ebp - subl $1b, %ebp + leal (BP_scratch+4)(%esi), %esp + call 1f +1: popl %ebp + subl $1b, %ebp -/* %ebp contains the address we are loaded at by the boot loader and %ebx +/* + * %ebp contains the address we are loaded at by the boot loader and %ebx * contains the address where we should move the kernel image temporarily * for safe in-place decompression. */ #ifdef CONFIG_RELOCATABLE - movl %ebp, %ebx + movl %ebp, %ebx addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx #else - movl $LOAD_PHYSICAL_ADDR, %ebx + movl $LOAD_PHYSICAL_ADDR, %ebx #endif /* Replace the compressed data size with the uncompressed size */ - subl input_len(%ebp), %ebx - movl output_len(%ebp), %eax - addl %eax, %ebx + subl input_len(%ebp), %ebx + movl output_len(%ebp), %eax + addl %eax, %ebx /* Add 8 bytes for every 32K input block */ - shrl $12, %eax - addl %eax, %ebx + shrl $12, %eax + addl %eax, %ebx /* Add 32K + 18 bytes of extra slack */ - addl $(32768 + 18), %ebx + addl $(32768 + 18), %ebx /* Align on a 4K boundary */ - addl $4095, %ebx - andl $~4095, %ebx + addl $4095, %ebx + andl $~4095, %ebx -/* Copy the compressed kernel to the end of our buffer +/* + * Copy the compressed kernel to the end of our buffer * where decompression in place becomes safe. */ - pushl %esi - leal _ebss(%ebp), %esi - leal _ebss(%ebx), %edi - movl $(_ebss - startup_32), %ecx + pushl %esi + leal _ebss(%ebp), %esi + leal _ebss(%ebx), %edi + movl $(_ebss - startup_32), %ecx std - rep - movsb + rep movsb cld - popl %esi + popl %esi -/* Compute the kernel start address. +/* + * Compute the kernel start address. */ #ifdef CONFIG_RELOCATABLE addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp @@ -109,81 +114,84 @@ ENTRY(startup_32) /* * Jump to the relocated address. */ - leal relocated(%ebx), %eax - jmp *%eax + leal relocated(%ebx), %eax + jmp *%eax ENDPROC(startup_32) -.section ".text" + .text relocated: /* * Clear BSS */ - xorl %eax,%eax - leal _edata(%ebx),%edi - leal _ebss(%ebx), %ecx - subl %edi,%ecx + xorl %eax, %eax + leal _edata(%ebx), %edi + leal _ebss(%ebx), %ecx + subl %edi, %ecx cld - rep - stosb + rep stosb /* * Setup the stack for the decompressor */ - leal boot_stack_end(%ebx), %esp + leal boot_stack_end(%ebx), %esp /* * Do the decompression, and jump to the new kernel.. */ - movl output_len(%ebx), %eax - pushl %eax - # push arguments for decompress_kernel: - pushl %ebp # output address - movl input_len(%ebx), %eax - pushl %eax # input_len - leal input_data(%ebx), %eax - pushl %eax # input_data - leal boot_heap(%ebx), %eax - pushl %eax # heap area - pushl %esi # real mode pointer - call decompress_kernel - addl $20, %esp - popl %ecx + movl output_len(%ebx), %eax + pushl %eax + /* push arguments for decompress_kernel: */ + pushl %ebp /* output address */ + movl input_len(%ebx), %eax + pushl %eax /* input_len */ + leal input_data(%ebx), %eax + pushl %eax /* input_data */ + leal boot_heap(%ebx), %eax + pushl %eax /* heap area */ + pushl %esi /* real mode pointer */ + call decompress_kernel + addl $20, %esp + popl %ecx #if CONFIG_RELOCATABLE -/* Find the address of the relocations. +/* + * Find the address of the relocations. */ - movl %ebp, %edi - addl %ecx, %edi + movl %ebp, %edi + addl %ecx, %edi -/* Calculate the delta between where vmlinux was compiled to run +/* + * Calculate the delta between where vmlinux was compiled to run * and where it was actually loaded. */ - movl %ebp, %ebx - subl $LOAD_PHYSICAL_ADDR, %ebx - jz 2f /* Nothing to be done if loaded at compiled addr. */ + movl %ebp, %ebx + subl $LOAD_PHYSICAL_ADDR, %ebx + jz 2f /* Nothing to be done if loaded at compiled addr. */ /* * Process relocations. */ -1: subl $4, %edi - movl 0(%edi), %ecx - testl %ecx, %ecx - jz 2f - addl %ebx, -__PAGE_OFFSET(%ebx, %ecx) - jmp 1b +1: subl $4, %edi + movl (%edi), %ecx + testl %ecx, %ecx + jz 2f + addl %ebx, -__PAGE_OFFSET(%ebx, %ecx) + jmp 1b 2: #endif /* * Jump to the decompressed kernel. */ - xorl %ebx,%ebx - jmp *%ebp + xorl %ebx, %ebx + jmp *%ebp -.bss -/* Stack and heap for uncompression */ -.balign 4 +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 boot_heap: .fill BOOT_HEAP_SIZE, 1, 0 boot_stack: