From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 17 Jun 2016 20:28:06 +0000 (+0200)
Subject: ARM: dts: add SDCC5 to Qualcomm MSM8660
X-Git-Tag: v4.8-rc1~66^2~19^2~6
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5f7610076e5bbfde4b837c018a674170bcb26a92;p=karo-tx-linux.git

ARM: dts: add SDCC5 to Qualcomm MSM8660

The SDCC5 SD/MMC controller is used for a second uSD slot
on the APQ8060 Dragonboard. On most other systems it is just
dark silicon so define it and leave it as "disabled" in the core
SoC file.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
---

diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 6a62b62ad980..a5a38820554a 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -262,6 +262,22 @@
 				no-1-8-v;
 				vmmc-supply = <&vsdcc_fixed>;
 			};
+
+			sdcc5: sdcc@12200000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12200000 0x8000>;
+				interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <48000000>;
+				vmmc-supply = <&vsdcc_fixed>;
+			};
 		};
 
 		tcsr: syscon@1a400000 {