From: Rafał Miłecki <zajec5@gmail.com>
Date: Wed, 27 Apr 2016 07:05:03 +0000 (+0200)
Subject: ARM: BCM5301X: Enable SPI-NOR on dual flash devices
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5f79985dcfec73d7a09ed99c40c28b64552518fe;p=linux-beck.git

ARM: BCM5301X: Enable SPI-NOR on dual flash devices

Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and
NOR flash") enabled SPI-NOR device on routers using serial flash only.
However there are also devices with two flash memories:
1) Small SPI attached flash used mostly for booting
2) Bigger NAND used mostly for storing firmware
On such devices we still need SPI-NOR e.g. to access NVRAM data.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---

diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 5087aa81efb1..9cb186ea2e97 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -147,3 +147,7 @@
 &usb3 {
 	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 1049ab108b32..8ce39d58eeb8 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -90,3 +90,7 @@
 &usb3 {
 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 3a94606d042b..6229ef283c41 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -82,3 +82,7 @@
 		};
 	};
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index 791d7225c733..0653e7ef248c 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -131,3 +131,7 @@
 &usb2 {
 	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 };
+
+&spi_nor {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index ace38efd2db3..50cf80489cbf 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -113,3 +113,7 @@
 &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
+
+&spi_nor {
+	status = "okay";
+};