From: Sascha Hauer Date: Tue, 26 Jun 2012 15:26:16 +0000 (+0200) Subject: mtd: gpmi-nand: fix read page when reading to vmalloced area X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6023813a2d5949ba368e7df464f2ccb649719777;p=linux-beck.git mtd: gpmi-nand: fix read page when reading to vmalloced area The gpmi-nand driver uses virt_addr_valid() to check whether a buffer is suitable for dma. If it's not, a driver allocated buffer is used instead. Then after a page read the driver allocated buffer must be copied to the user supplied buffer. This does not happen since commit 7725cc85932bd02dd12c23108e0ef748c551ccba. This patch fixes the issue. The bug is encountered with UBI which uses a vmalloced buffer for the volume table. Signed-off-by: Sascha Hauer Tested-by: snijsure@grid-net.com Acked-by: Huang Shijie Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index a05b7b444d4f..a6cad5caba78 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -920,12 +920,12 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, */ memset(chip->oob_poi, ~0, mtd->oobsize); chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; - - read_page_swap_end(this, buf, mtd->writesize, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - payload_virt, payload_phys); } + + read_page_swap_end(this, buf, mtd->writesize, + this->payload_virt, this->payload_phys, + nfc_geo->payload_size, + payload_virt, payload_phys); exit_nfc: return ret; }