From: Matthias Reichl <hias@horus.com>
Date: Mon, 25 Apr 2016 13:39:39 +0000 (+0000)
Subject: ASoC: bcm2835: setup clock only if CPU is clock master
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=60507fe191f524e82986fa737e5b27b4d3ad9289;p=linux-beck.git

ASoC: bcm2835: setup clock only if CPU is clock master

We only need to enable the clock if we are a clock master.

Code ported from bcm2708-i2s driver in Raspberry Pi tree.
Original work by Zoltan Szenczi.

Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---

diff --git a/sound/soc/bcm/bcm2835-i2s.c b/sound/soc/bcm/bcm2835-i2s.c
index d2663e79ece1..a0026e2d2f0a 100644
--- a/sound/soc/bcm/bcm2835-i2s.c
+++ b/sound/soc/bcm/bcm2835-i2s.c
@@ -276,8 +276,15 @@ static int bcm2835_i2s_hw_params(struct snd_pcm_substream *substream,
 		/* otherwise calculate a fitting block ratio */
 		bclk_ratio = 2 * data_length;
 
-	/* set target clock rate*/
-	clk_set_rate(dev->clk, sampling_rate * bclk_ratio);
+	/* Clock should only be set up here if CPU is clock master */
+	switch (dev->fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+	case SND_SOC_DAIFMT_CBS_CFM:
+		clk_set_rate(dev->clk, sampling_rate * bclk_ratio);
+		break;
+	default:
+		break;
+	}
 
 	/* Setup the frame format */
 	format = BCM2835_I2S_CHEN;