From: Bart Van Assche <bart.vanassche@sandisk.com>
Date: Wed, 11 Jan 2017 19:57:17 +0000 (-0800)
Subject: qla2xxx: Move two arrays from header files to .c files
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=61778a1c5a4556da1a1e005d506f89f009031e62;p=linux-beck.git

qla2xxx: Move two arrays from header files to .c files

This patch avoids that building with W=1 triggers compiler
warnings similar to the following:

drivers/scsi/qla2xxx/qla_nx2.h:538:23: warning: ‘qla8044_reg_tbl’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Christoph Hellwig <hch@lst.de>
---

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 54380b434b30..0a1723cc08cf 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -42,6 +42,11 @@ static int qla82xx_crb_table_initialized;
 	(crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \
 	QLA82XX_HW_CRB_HUB_AGT_ADR_##name << 20)
 
+const int MD_MIU_TEST_AGT_RDDATA[] = {
+	0x410000A8, 0x410000AC,
+	0x410000B8, 0x410000BC
+};
+
 static void qla82xx_crb_addr_transform_setup(void)
 {
 	qla82xx_crb_addr_transform(XDMA);
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 6201dce3553b..77624eac95a4 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -1176,8 +1176,7 @@ struct qla82xx_md_entry_queue {
 #define MD_MIU_TEST_AGT_ADDR_LO		0x41000094
 #define MD_MIU_TEST_AGT_ADDR_HI		0x41000098
 
-static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC,
-	0x410000B8, 0x410000BC };
+extern const int MD_MIU_TEST_AGT_RDDATA[4];
 
 #define CRB_NIU_XG_PAUSE_CTL_P0        0x1
 #define CRB_NIU_XG_PAUSE_CTL_P1        0x8
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index 007192d7bad8..dc1ec9b61027 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -15,6 +15,23 @@
 
 #define TIMEOUT_100_MS 100
 
+static const uint32_t qla8044_reg_tbl[] = {
+	QLA8044_PEG_HALT_STATUS1,
+	QLA8044_PEG_HALT_STATUS2,
+	QLA8044_PEG_ALIVE_COUNTER,
+	QLA8044_CRB_DRV_ACTIVE,
+	QLA8044_CRB_DEV_STATE,
+	QLA8044_CRB_DRV_STATE,
+	QLA8044_CRB_DRV_SCRATCH,
+	QLA8044_CRB_DEV_PART_INFO1,
+	QLA8044_CRB_IDC_VER_MAJOR,
+	QLA8044_FW_VER_MAJOR,
+	QLA8044_FW_VER_MINOR,
+	QLA8044_FW_VER_SUB,
+	QLA8044_CMDPEG_STATE,
+	QLA8044_ASIC_TEMP,
+};
+
 /* 8044 Flash Read/Write functions */
 uint32_t
 qla8044_rd_reg(struct qla_hw_data *ha, ulong addr)
diff --git a/drivers/scsi/qla2xxx/qla_nx2.h b/drivers/scsi/qla2xxx/qla_nx2.h
index 02fe3c4cdf55..83c1b7e17c80 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.h
+++ b/drivers/scsi/qla2xxx/qla_nx2.h
@@ -535,23 +535,6 @@ enum qla_regs {
 #define CRB_CMDPEG_CHECK_RETRY_COUNT    60
 #define CRB_CMDPEG_CHECK_DELAY          500
 
-static const uint32_t qla8044_reg_tbl[] = {
-	QLA8044_PEG_HALT_STATUS1,
-	QLA8044_PEG_HALT_STATUS2,
-	QLA8044_PEG_ALIVE_COUNTER,
-	QLA8044_CRB_DRV_ACTIVE,
-	QLA8044_CRB_DEV_STATE,
-	QLA8044_CRB_DRV_STATE,
-	QLA8044_CRB_DRV_SCRATCH,
-	QLA8044_CRB_DEV_PART_INFO1,
-	QLA8044_CRB_IDC_VER_MAJOR,
-	QLA8044_FW_VER_MAJOR,
-	QLA8044_FW_VER_MINOR,
-	QLA8044_FW_VER_SUB,
-	QLA8044_CMDPEG_STATE,
-	QLA8044_ASIC_TEMP,
-};
-
 /* MiniDump Structures */
 
 /* Driver_code is for driver to write some info about the entry