From: Mike Frysinger Date: Wed, 23 Apr 2008 00:07:05 +0000 (+0800) Subject: [Blackfin] arch: MEM_ADD_WIDTH only gets used when reprogramming clocks, so dont... X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=618835a0e33a822d18b391a5e9dd821c8fb34b06;p=mv-sheeva.git [Blackfin] arch: MEM_ADD_WIDTH only gets used when reprogramming clocks, so dont bother exposing it in the menu normally Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index a3cf9d0a528..add87a5f64e 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -303,6 +303,18 @@ config BFIN_KERNEL_CLOCK are also not changed, and the Bootloader does 100% of the hardware configuration. +config MEM_ADD_WIDTH + int "Memory Address Width" + depends on BFIN_KERNEL_CLOCK + depends on (!BF54x) + default 9 if BFIN533_EZKIT + default 9 if BFIN561_EZKIT + default 9 if H8606_HVSISTEMAS + default 10 if BFIN527_EZKIT + default 10 if BFIN537_STAMP + default 11 if BFIN533_STAMP + default 10 if PNAV10 + config PLL_BYPASS bool "Bypass PLL" depends on BFIN_KERNEL_CLOCK @@ -448,18 +460,6 @@ config MEM_SIZE default 64 if PNAV10 default 32 if H8606_HVSISTEMAS -config MEM_ADD_WIDTH - int "SDRAM Memory Address Width" - depends on (!BF54x) - default 9 if BFIN533_EZKIT - default 9 if BFIN561_EZKIT - default 9 if H8606_HVSISTEMAS - default 10 if BFIN527_EZKIT - default 10 if BFIN537_STAMP - default 11 if BFIN533_STAMP - default 10 if PNAV10 - - choice prompt "DDR SDRAM Chip Type" depends on BFIN548_EZKIT