From: Masahiro Yamada Date: Thu, 3 Dec 2015 06:33:56 +0000 (+0900) Subject: ARM: dts: uniphier: change IRQ number of UART3 of PH1-Pro4 SoC X-Git-Tag: v4.5-rc1~43^2~40 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=618a43eaea14cb4f6526a4e93c6b791778d160b0;p=karo-tx-linux.git ARM: dts: uniphier: change IRQ number of UART3 of PH1-Pro4 SoC The UART3 is assigned with IRQ 29 for old SoCs, IRQ 177 for new ones, and PH1-Pro4 is on the boundary. PH1-sLD3: UART3 is unavailable PH1-LD4, PH1-sLD8: only IRQ 29 is supported PH1-Pro4: both IRQ 29 and 177 are supported PH1-Pro5, ProXstream2, PH1-LD6b: only IRQ 177 is supported This SoC can choose either IRQ 29 or IRQ 177, but the former is shared with another hardware (low speed serial0). The latter is dedicated for this hardware and more recommended. Signed-off-by: Masahiro Yamada Signed-off-by: Arnd Bergmann --- diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index 254642fe0e71..bbf37273bb73 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -151,7 +151,7 @@ reg = <0x54006b00 0x40>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - interrupts = <0 29 4>; + interrupts = <0 177 4>; clocks = <&uart_clk>; fifo-size = <64>; };