From: Alexander Shiyan Date: Tue, 7 Jun 2016 15:59:24 +0000 (+0300) Subject: serial: max310x: Register UART driver at module_init X-Git-Tag: v4.8-rc1~192^2~28 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6286767ad3afc886ec6473409aa02191cb54f97b;p=karo-tx-linux.git serial: max310x: Register UART driver at module_init This patch moves UART registration at module_init initcall, so this should helps to add multiple chip support in the future. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 6e2edbb942d6..66dd3e24f3d6 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1,7 +1,7 @@ /* * Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver * - * Copyright (C) 2012-2014 Alexander Shiyan + * Copyright (C) 2012-2016 Alexander Shiyan * * Based on max3100.c, by Christian Pellegrin * Based on max3110.c, by Feng Tang @@ -32,6 +32,7 @@ #define MAX310X_NAME "max310x" #define MAX310X_MAJOR 204 #define MAX310X_MINOR 209 +#define MAX310X_UART_NR 4 /* MAX310X register definitions */ #define MAX310X_RHR_REG (0x00) /* RX FIFO */ @@ -266,7 +267,6 @@ struct max310x_one { }; struct max310x_port { - struct uart_driver uart; struct max310x_devtype *devtype; struct regmap *regmap; struct mutex mutex; @@ -277,6 +277,15 @@ struct max310x_port { struct max310x_one p[0]; }; +static struct uart_driver max310x_uart = { + .owner = THIS_MODULE, + .driver_name = MAX310X_NAME, + .dev_name = "ttyMAX", + .major = MAX310X_MAJOR, + .minor = MAX310X_MINOR, + .nr = MAX310X_UART_NR, +}; + static u8 max310x_port_read(struct uart_port *port, u8 reg) { struct max310x_port *s = dev_get_drvdata(port->dev); @@ -716,13 +725,13 @@ static irqreturn_t max310x_ist(int irq, void *dev_id) { struct max310x_port *s = (struct max310x_port *)dev_id; - if (s->uart.nr > 1) { + if (s->devtype->nr > 1) { do { unsigned int val = ~0; WARN_ON_ONCE(regmap_read(s->regmap, MAX310X_GLOBALIRQ_REG, &val)); - val = ((1 << s->uart.nr) - 1) & ~val; + val = ((1 << s->devtype->nr) - 1) & ~val; if (!val) break; max310x_port_irq(s, fls(val) - 1); @@ -1019,8 +1028,8 @@ static int __maybe_unused max310x_suspend(struct device *dev) struct max310x_port *s = dev_get_drvdata(dev); int i; - for (i = 0; i < s->uart.nr; i++) { - uart_suspend_port(&s->uart, &s->p[i].port); + for (i = 0; i < s->devtype->nr; i++) { + uart_suspend_port(&max310x_uart, &s->p[i].port); s->devtype->power(&s->p[i].port, 0); } @@ -1032,9 +1041,9 @@ static int __maybe_unused max310x_resume(struct device *dev) struct max310x_port *s = dev_get_drvdata(dev); int i; - for (i = 0; i < s->uart.nr; i++) { + for (i = 0; i < s->devtype->nr; i++) { s->devtype->power(&s->p[i].port, 1); - uart_resume_port(&s->uart, &s->p[i].port); + uart_resume_port(&max310x_uart, &s->p[i].port); } return 0; @@ -1169,18 +1178,6 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, uartclk = max310x_set_ref_clk(s, freq, xtal); dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); - /* Register UART driver */ - s->uart.owner = THIS_MODULE; - s->uart.dev_name = "ttyMAX"; - s->uart.major = MAX310X_MAJOR; - s->uart.minor = MAX310X_MINOR; - s->uart.nr = devtype->nr; - ret = uart_register_driver(&s->uart); - if (ret) { - dev_err(dev, "Registering UART driver failed\n"); - goto out_clk; - } - #ifdef CONFIG_GPIOLIB /* Setup GPIO cotroller */ s->gpio.owner = THIS_MODULE; @@ -1194,10 +1191,8 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, s->gpio.ngpio = devtype->nr * 4; s->gpio.can_sleep = 1; ret = devm_gpiochip_add_data(dev, &s->gpio, s); - if (ret) { - uart_unregister_driver(&s->uart); + if (ret) goto out_clk; - } #endif mutex_init(&s->mutex); @@ -1231,7 +1226,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, /* Initialize queue for changing RS485 mode */ INIT_WORK(&s->p[i].rs_work, max310x_rs_proc); /* Register port */ - uart_add_one_port(&s->uart, &s->p[i].port); + uart_add_one_port(&max310x_uart, &s->p[i].port); /* Go to suspend mode */ devtype->power(&s->p[i].port, 0); } @@ -1246,8 +1241,6 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, mutex_destroy(&s->mutex); - uart_unregister_driver(&s->uart); - out_clk: clk_disable_unprepare(s->clk); @@ -1259,16 +1252,15 @@ static int max310x_remove(struct device *dev) struct max310x_port *s = dev_get_drvdata(dev); int i; - for (i = 0; i < s->uart.nr; i++) { + for (i = 0; i < s->devtype->nr; i++) { cancel_work_sync(&s->p[i].tx_work); cancel_work_sync(&s->p[i].md_work); cancel_work_sync(&s->p[i].rs_work); - uart_remove_one_port(&s->uart, &s->p[i].port); + uart_remove_one_port(&max310x_uart, &s->p[i].port); s->devtype->power(&s->p[i].port, 0); } mutex_destroy(&s->mutex); - uart_unregister_driver(&s->uart); clk_disable_unprepare(s->clk); return 0; @@ -1341,7 +1333,7 @@ static const struct spi_device_id max310x_id_table[] = { }; MODULE_DEVICE_TABLE(spi, max310x_id_table); -static struct spi_driver max310x_uart_driver = { +static struct spi_driver max310x_spi_driver = { .driver = { .name = MAX310X_NAME, .of_match_table = of_match_ptr(max310x_dt_ids), @@ -1351,9 +1343,34 @@ static struct spi_driver max310x_uart_driver = { .remove = max310x_spi_remove, .id_table = max310x_id_table, }; -module_spi_driver(max310x_uart_driver); #endif +static int __init max310x_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&max310x_uart); + if (ret) + return ret; + +#ifdef CONFIG_SPI_MASTER + spi_register_driver(&max310x_spi_driver); +#endif + + return 0; +} +module_init(max310x_uart_init); + +static void __exit max310x_uart_exit(void) +{ +#ifdef CONFIG_SPI_MASTER + spi_unregister_driver(&max310x_spi_driver); +#endif + + uart_unregister_driver(&max310x_uart); +} +module_exit(max310x_uart_exit); + MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alexander Shiyan "); MODULE_DESCRIPTION("MAX310X serial driver");