From: Gary Hade Date: Wed, 3 Oct 2007 22:56:51 +0000 (-0700) Subject: PCI: use _CRS for PCI resource allocation X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=62f420f828249f686aaae949ac3439d1304a759a;p=linux-beck.git PCI: use _CRS for PCI resource allocation Use _CRS for PCI resource allocation This patch resolves an issue where incorrect PCI memory and i/o ranges are being assigned to hotplugged PCI devices on some IBM systems. The resource mis-allocation not only makes the PCI device unuseable but often makes the entire system unuseable due to resulting machine checks. The hotplug capable PCI slots on the affected systems are not located under a standard P2P bridge but are instead located under PCI root bridges or subtractive decode P2P bridges. For example, the IBM x3850 contains 2 hotplug capable PCI-X slots and 4 hotplug capable PCIe slots with the PCI-X slots each located under a PCI root bridge and the PCIe slots each located under a subtractive decode P2P bridge. The current i386/x86_64 PCI resource allocation code does not use _CRS returned resource information. No other resource information source is available for slots that are not below a standard P2P bridge so incorrect ranges are being allocated from e820 hole causing the bad result. This patch causes the kernel to use _CRS returned resource info. It is roughly based on a change provided by Matthew Wilcox for the ia64 kernel in 2005. Due to possible buggy BIOS factor and possible yet to be discovered kernel issues the function is disabled by default and can be enabled with pci=use_crs. Signed-off-by: Gary Hade Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 3f0173f45019..e9acd5540d29 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1318,6 +1318,8 @@ and is between 256 and 4096 characters. It is defined in the file IRQ routing is enabled. noacpi [X86-32] Do not use ACPI for IRQ routing or for PCI scanning. + use_crs [X86-32] Use _CRS for PCI resource + allocation. routeirq Do IRQ routing for all PCI devices. This is normally done in pci_enable_device(), so this option is a temporary workaround diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 1dd6f3fc077d..c6fd3a6afa42 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -45,6 +45,142 @@ static struct dmi_system_id acpi_pciprobe_dmi_table[] = { {} }; +struct pci_root_info { + char *name; + unsigned int res_num; + struct resource *res; + struct pci_bus *bus; + int busnum; +}; + +static acpi_status +resource_to_addr(struct acpi_resource *resource, + struct acpi_resource_address64 *addr) +{ + acpi_status status; + + status = acpi_resource_to_address64(resource, addr); + if (ACPI_SUCCESS(status) && + (addr->resource_type == ACPI_MEMORY_RANGE || + addr->resource_type == ACPI_IO_RANGE) && + addr->address_length > 0 && + addr->producer_consumer == ACPI_PRODUCER) { + return AE_OK; + } + return AE_ERROR; +} + +static acpi_status +count_resource(struct acpi_resource *acpi_res, void *data) +{ + struct pci_root_info *info = data; + struct acpi_resource_address64 addr; + acpi_status status; + + status = resource_to_addr(acpi_res, &addr); + if (ACPI_SUCCESS(status)) + info->res_num++; + return AE_OK; +} + +static acpi_status +setup_resource(struct acpi_resource *acpi_res, void *data) +{ + struct pci_root_info *info = data; + struct resource *res; + struct acpi_resource_address64 addr; + acpi_status status; + unsigned long flags; + struct resource *root; + + status = resource_to_addr(acpi_res, &addr); + if (!ACPI_SUCCESS(status)) + return AE_OK; + + if (addr.resource_type == ACPI_MEMORY_RANGE) { + root = &iomem_resource; + flags = IORESOURCE_MEM; + if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY) + flags |= IORESOURCE_PREFETCH; + } else if (addr.resource_type == ACPI_IO_RANGE) { + root = &ioport_resource; + flags = IORESOURCE_IO; + } else + return AE_OK; + + res = &info->res[info->res_num]; + res->name = info->name; + res->flags = flags; + res->start = addr.minimum + addr.translation_offset; + res->end = res->start + addr.address_length - 1; + res->child = NULL; + + if (insert_resource(root, res)) { + printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx " + "from %s for %s\n", (unsigned long) res->start, + (unsigned long) res->end, root->name, info->name); + } else { + info->bus->resource[info->res_num] = res; + info->res_num++; + } + return AE_OK; +} + +static void +adjust_transparent_bridge_resources(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + int i; + u16 class = dev->class >> 8; + + if (class == PCI_CLASS_BRIDGE_PCI && dev->transparent) { + for(i = 3; i < PCI_BUS_NUM_RESOURCES; i++) + dev->subordinate->resource[i] = + dev->bus->resource[i - 3]; + } + } +} + +static void +get_current_resources(struct acpi_device *device, int busnum, + struct pci_bus *bus) +{ + struct pci_root_info info; + size_t size; + + info.bus = bus; + info.res_num = 0; + acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource, + &info); + if (!info.res_num) + return; + + size = sizeof(*info.res) * info.res_num; + info.res = kmalloc(size, GFP_KERNEL); + if (!info.res) + goto res_alloc_fail; + + info.name = kmalloc(12, GFP_KERNEL); + if (!info.name) + goto name_alloc_fail; + sprintf(info.name, "PCI Bus #%02x", busnum); + + info.res_num = 0; + acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource, + &info); + if (info.res_num) + adjust_transparent_bridge_resources(bus); + + return; + +name_alloc_fail: + kfree(info.res); +res_alloc_fail: + return; +} + struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum) { struct pci_bus *bus; @@ -89,6 +225,9 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do } } #endif + + if (bus && (pci_probe & PCI_USE__CRS)) + get_current_resources(device, busnum, bus); return bus; } diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 7c4d75e3c5f3..7d6a9a5aa7cd 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -436,6 +436,9 @@ char * __devinit pcibios_setup(char *str) } else if (!strcmp(str, "assign-busses")) { pci_probe |= PCI_ASSIGN_ALL_BUSSES; return NULL; + } else if (!strcmp(str, "use_crs")) { + pci_probe |= PCI_USE__CRS; + return NULL; } else if (!strcmp(str, "routeirq")) { pci_routeirq = 1; return NULL; diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h index 057f335fa3f6..ac56d3916c50 100644 --- a/arch/x86/pci/pci.h +++ b/arch/x86/pci/pci.h @@ -27,6 +27,7 @@ #define PCI_BIOS_IRQ_SCAN 0x2000 #define PCI_ASSIGN_ALL_BUSSES 0x4000 #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 +#define PCI_USE__CRS 0x10000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr;