From: Michal Kazior Date: Mon, 9 Feb 2015 14:04:55 +0000 (+0100) Subject: ath10k: workaround corrupted htt rx events X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6383864053cc456aa82847cd910257deaa34eb5a;p=linux-beck.git ath10k: workaround corrupted htt rx events qca6174 WLAN.RM.2.0-00073 firmware uses full rx reordering offload and delivers Rx via a new HTT event. The event however is incorrectly generated in firmware and becomes overly long (with trailing garbage). This was hitting defined CE buffer limit that was programmed to the device and caused device to crash upon busier Rx traffic. Increasing the CE buffer limit for HTT Rx pipe to 2KBytes seems to be enough to workaround this problem. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index e6972b09333e..7681237fe298 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -104,7 +104,7 @@ static const struct ce_attr host_ce_config_wlan[] = { { .flags = CE_ATTR_FLAGS, .src_nentries = 0, - .src_sz_max = 512, + .src_sz_max = 2048, .dest_nentries = 512, }, @@ -174,7 +174,7 @@ static const struct ce_pipe_config target_ce_config_wlan[] = { .pipenum = __cpu_to_le32(1), .pipedir = __cpu_to_le32(PIPEDIR_IN), .nentries = __cpu_to_le32(32), - .nbytes_max = __cpu_to_le32(512), + .nbytes_max = __cpu_to_le32(2048), .flags = __cpu_to_le32(CE_ATTR_FLAGS), .reserved = __cpu_to_le32(0), },