From: Matthijs Kooijman Date: Fri, 17 May 2013 08:52:55 +0000 (+0200) Subject: staging: dwc2: Fix dma-enabled platform devices using a default dma_mask X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=642f2ec;p=linux-beck.git staging: dwc2: Fix dma-enabled platform devices using a default dma_mask Platform devices added through OF usually do not have any dma_mask pointer set. If the hardware advertises DMA support, the driver will expect DMA buffers to be passed in, but the USB core will not do this due to lack of a dma mask, breaking all connectiviy. To fix this, set a default dma_mask by pointing it at the coherent_dma_mask and set their value to a 32 bit mask. This still allows any platform code to set any more specific mask if needed, but makes the driver work for most dma-enabled hardware. It would be great if this patch could be included in 3.10, since it is needed to make the dwc2 driver work on the ralink rt3052 target. Before, the plan was to set up the dma mask in MIPS platform code, but because of a similar change in ehci and the uglyness of the code for that, the plan for that infrastructure was dropped. This patch makes the setting of the dma_mask happen in the same way as the patch Stephen Warren (set device dma_mask without reference to global data). Signed-off-by: Matthijs Kooijman Acked-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/dwc2/platform.c b/drivers/staging/dwc2/platform.c index 1f3d581a1078..afc515bd8233 100644 --- a/drivers/staging/dwc2/platform.c +++ b/drivers/staging/dwc2/platform.c @@ -95,6 +95,14 @@ static int dwc2_driver_probe(struct platform_device *dev) hsotg->dev = &dev->dev; + /* + * Use reasonable defaults so platforms don't have to provide these. + */ + if (!dev->dev.dma_mask) + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + if (!dev->dev.coherent_dma_mask) + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "missing IRQ resource\n");