From: Charles Spirakis Date: Tue, 4 Sep 2007 20:31:56 +0000 (-0700) Subject: hwmon: (w83791d) new sysfs beep/alarm methodology X-Git-Tag: v2.6.24-rc1~1299^2~28 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=6438312367523b26bd628b60cfd16f25a7a6f7ae;p=karo-tx-linux.git hwmon: (w83791d) new sysfs beep/alarm methodology Add new sysfs alarm methodology to w83791d driver Signed-off-by: Charles Spirakis Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index db9881df88a5..f153b2f6d62c 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -75,46 +75,64 @@ Voltage sensors (also known as IN sensors) report their values in millivolts. An alarm is triggered if the voltage has crossed a programmable minimum or maximum limit. -The bit ordering for the alarm "realtime status register" and the -"beep enable registers" are different. - -in0 (VCORE) : alarms: 0x000001 beep_enable: 0x000001 -in1 (VINR0) : alarms: 0x000002 beep_enable: 0x002000 <== mismatch -in2 (+3.3VIN): alarms: 0x000004 beep_enable: 0x000004 -in3 (5VDD) : alarms: 0x000008 beep_enable: 0x000008 -in4 (+12VIN) : alarms: 0x000100 beep_enable: 0x000100 -in5 (-12VIN) : alarms: 0x000200 beep_enable: 0x000200 -in6 (-5VIN) : alarms: 0x000400 beep_enable: 0x000400 -in7 (VSB) : alarms: 0x080000 beep_enable: 0x010000 <== mismatch -in8 (VBAT) : alarms: 0x100000 beep_enable: 0x020000 <== mismatch -in9 (VINR1) : alarms: 0x004000 beep_enable: 0x004000 -temp1 : alarms: 0x000010 beep_enable: 0x000010 -temp2 : alarms: 0x000020 beep_enable: 0x000020 -temp3 : alarms: 0x002000 beep_enable: 0x000002 <== mismatch -fan1 : alarms: 0x000040 beep_enable: 0x000040 -fan2 : alarms: 0x000080 beep_enable: 0x000080 -fan3 : alarms: 0x000800 beep_enable: 0x000800 -fan4 : alarms: 0x200000 beep_enable: 0x200000 -fan5 : alarms: 0x400000 beep_enable: 0x400000 -tart1 : alarms: 0x010000 beep_enable: 0x040000 <== mismatch -tart2 : alarms: 0x020000 beep_enable: 0x080000 <== mismatch -tart3 : alarms: 0x040000 beep_enable: 0x100000 <== mismatch -case_open : alarms: 0x001000 beep_enable: 0x001000 -user_enable : alarms: -------- beep_enable: 0x800000 - -*** NOTE: It is the responsibility of user-space code to handle the fact -that the beep enable and alarm bits are in different positions when using that -feature of the chip. - -When an alarm goes off, you can be warned by a beeping signal through your -computer speaker. It is possible to enable all beeping globally, or only -the beeping for some alarms. - -The driver only reads the chip values each 3 seconds; reading them more -often will do no harm, but will return 'old' values. +The w83791d has a global bit used to enable beeping from the speaker when an +alarm is triggered as well as a bitmask to enable or disable the beep for +specific alarms. You need both the global beep enable bit and the +corresponding beep bit to be on for a triggered alarm to sound a beep. + +The sysfs interface to the gloabal enable is via the sysfs beep_enable file. +This file is used for both legacy and new code. + +The sysfs interface to the beep bitmask has migrated from the original legacy +method of a single sysfs beep_mask file to a newer method using multiple +*_beep files as described in .../Documentation/hwmon/sysfs-interface. + +A similar change has occured for the bitmap corresponding to the alarms. The +original legacy method used a single sysfs alarms file containing a bitmap +of triggered alarms. The newer method uses multiple sysfs *_alarm files +(again following the pattern described in sysfs-interface). + +Since both methods read and write the underlying hardware, they can be used +interchangeably and changes in one will automatically be reflected by +the other. If you use the legacy bitmask method, your user-space code is +responsible for handling the fact that the alarms and beep_mask bitmaps +are not the same (see the table below). + +NOTE: All new code should be written to use the newer sysfs-interface +specification as that avoids bitmap problems and is the preferred interface +going forward. + +The driver reads the hardware chip values at most once every three seconds. +User mode code requesting values more often will receive cached values. + +Alarms bitmap vs. beep_mask bitmask +------------------------------------ +For legacy code using the alarms and beep_mask files: + +in0 (VCORE) : alarms: 0x000001 beep_mask: 0x000001 +in1 (VINR0) : alarms: 0x000002 beep_mask: 0x002000 <== mismatch +in2 (+3.3VIN): alarms: 0x000004 beep_mask: 0x000004 +in3 (5VDD) : alarms: 0x000008 beep_mask: 0x000008 +in4 (+12VIN) : alarms: 0x000100 beep_mask: 0x000100 +in5 (-12VIN) : alarms: 0x000200 beep_mask: 0x000200 +in6 (-5VIN) : alarms: 0x000400 beep_mask: 0x000400 +in7 (VSB) : alarms: 0x080000 beep_mask: 0x010000 <== mismatch +in8 (VBAT) : alarms: 0x100000 beep_mask: 0x020000 <== mismatch +in9 (VINR1) : alarms: 0x004000 beep_mask: 0x004000 +temp1 : alarms: 0x000010 beep_mask: 0x000010 +temp2 : alarms: 0x000020 beep_mask: 0x000020 +temp3 : alarms: 0x002000 beep_mask: 0x000002 <== mismatch +fan1 : alarms: 0x000040 beep_mask: 0x000040 +fan2 : alarms: 0x000080 beep_mask: 0x000080 +fan3 : alarms: 0x000800 beep_mask: 0x000800 +fan4 : alarms: 0x200000 beep_mask: 0x200000 +fan5 : alarms: 0x400000 beep_mask: 0x400000 +tart1 : alarms: 0x010000 beep_mask: 0x040000 <== mismatch +tart2 : alarms: 0x020000 beep_mask: 0x080000 <== mismatch +tart3 : alarms: 0x040000 beep_mask: 0x100000 <== mismatch +case_open : alarms: 0x001000 beep_mask: 0x001000 +global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable) W83791D TODO: --------------- -Provide a patch for per-file alarms and beep enables as defined in the hwmon - documentation (Documentation/hwmon/sysfs-interface) Provide a patch for smart-fan control (still need appropriate motherboard/fans) diff --git a/MAINTAINERS b/MAINTAINERS index 9a91d9e3f1f2..62931dbb4a75 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4106,7 +4106,7 @@ W83791D HARDWARE MONITORING DRIVER P: Charles Spirakis M: bezaur@gmail.com L: lm-sensors@lm-sensors.org -S: Maintained +S: Odd Fixes W83793 HARDWARE MONITORING DRIVER P: Rudolf Marek diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index a3cb89455ea7..de4eb3e7b271 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -2,7 +2,7 @@ w83791d.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (C) 2006 Charles Spirakis + Copyright (C) 2006-2007 Charles Spirakis This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -384,6 +384,85 @@ static struct sensor_device_attribute sda_in_max[] = { SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9), }; + +static ssize_t show_beep(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = + to_sensor_dev_attr(attr); + struct w83791d_data *data = w83791d_update_device(dev); + int bitnr = sensor_attr->index; + + return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1); +} + +static ssize_t store_beep(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sensor_attr = + to_sensor_dev_attr(attr); + struct i2c_client *client = to_i2c_client(dev); + struct w83791d_data *data = i2c_get_clientdata(client); + int bitnr = sensor_attr->index; + int bytenr = bitnr / 8; + long val = simple_strtol(buf, NULL, 10) ? 1 : 0; + + mutex_lock(&data->update_lock); + + data->beep_mask &= ~(0xff << (bytenr * 8)); + data->beep_mask |= w83791d_read(client, W83791D_REG_BEEP_CTRL[bytenr]) + << (bytenr * 8); + + data->beep_mask &= ~(1 << bitnr); + data->beep_mask |= val << bitnr; + + w83791d_write(client, W83791D_REG_BEEP_CTRL[bytenr], + (data->beep_mask >> (bytenr * 8)) & 0xff); + + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct sensor_device_attribute *sensor_attr = + to_sensor_dev_attr(attr); + struct w83791d_data *data = w83791d_update_device(dev); + int bitnr = sensor_attr->index; + + return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); +} + +/* Note: The bitmask for the beep enable/disable is different than + the bitmask for the alarm. */ +static struct sensor_device_attribute sda_in_beep[] = { + SENSOR_ATTR(in0_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 0), + SENSOR_ATTR(in1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 13), + SENSOR_ATTR(in2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 2), + SENSOR_ATTR(in3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 3), + SENSOR_ATTR(in4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 8), + SENSOR_ATTR(in5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 9), + SENSOR_ATTR(in6_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 10), + SENSOR_ATTR(in7_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 16), + SENSOR_ATTR(in8_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 17), + SENSOR_ATTR(in9_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 14), +}; + +static struct sensor_device_attribute sda_in_alarm[] = { + SENSOR_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0), + SENSOR_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1), + SENSOR_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2), + SENSOR_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3), + SENSOR_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8), + SENSOR_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9), + SENSOR_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10), + SENSOR_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 19), + SENSOR_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 20), + SENSOR_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 14), +}; + #define show_fan_reg(reg) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \ char *buf) \ @@ -536,6 +615,22 @@ static struct sensor_device_attribute sda_fan_div[] = { show_fan_div, store_fan_div, 4), }; +static struct sensor_device_attribute sda_fan_beep[] = { + SENSOR_ATTR(fan1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 6), + SENSOR_ATTR(fan2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 7), + SENSOR_ATTR(fan3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 11), + SENSOR_ATTR(fan4_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 21), + SENSOR_ATTR(fan5_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 22), +}; + +static struct sensor_device_attribute sda_fan_alarm[] = { + SENSOR_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6), + SENSOR_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7), + SENSOR_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11), + SENSOR_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 21), + SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22), +}; + /* read/write the temperature1, includes measured value and limits */ static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr, char *buf) @@ -618,6 +713,19 @@ static struct sensor_device_attribute_2 sda_temp_max_hyst[] = { show_temp23, store_temp23, 1, 2), }; +/* Note: The bitmask for the beep enable/disable is different than + the bitmask for the alarm. */ +static struct sensor_device_attribute sda_temp_beep[] = { + SENSOR_ATTR(temp1_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 4), + SENSOR_ATTR(temp2_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 5), + SENSOR_ATTR(temp3_beep, S_IWUSR | S_IRUGO, show_beep, store_beep, 1), +}; + +static struct sensor_device_attribute sda_temp_alarm[] = { + SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4), + SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5), + SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13), +}; /* get reatime status of all sensors items: voltage, temp, fan */ static ssize_t show_alarms_reg(struct device *dev, @@ -749,17 +857,23 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); #define IN_UNIT_ATTRS(X) \ &sda_in_input[X].dev_attr.attr, \ &sda_in_min[X].dev_attr.attr, \ - &sda_in_max[X].dev_attr.attr + &sda_in_max[X].dev_attr.attr, \ + &sda_in_beep[X].dev_attr.attr, \ + &sda_in_alarm[X].dev_attr.attr #define FAN_UNIT_ATTRS(X) \ &sda_fan_input[X].dev_attr.attr, \ &sda_fan_min[X].dev_attr.attr, \ - &sda_fan_div[X].dev_attr.attr + &sda_fan_div[X].dev_attr.attr, \ + &sda_fan_beep[X].dev_attr.attr, \ + &sda_fan_alarm[X].dev_attr.attr #define TEMP_UNIT_ATTRS(X) \ &sda_temp_input[X].dev_attr.attr, \ &sda_temp_max[X].dev_attr.attr, \ - &sda_temp_max_hyst[X].dev_attr.attr + &sda_temp_max_hyst[X].dev_attr.attr, \ + &sda_temp_beep[X].dev_attr.attr, \ + &sda_temp_alarm[X].dev_attr.attr static struct attribute *w83791d_attributes[] = { IN_UNIT_ATTRS(0),