From: Ville Syrjälä Date: Fri, 25 Apr 2014 17:14:30 +0000 (+0300) Subject: drm/i915: Drop /** */ comments from i915_reg.h X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=646b4269e4d0513b4c210cdd47384e8607f539fe;p=linux-beck.git drm/i915: Drop /** */ comments from i915_reg.h The comments in i915_reg.h aren't proper kernel-doc comments, so replace the magic /** with just /* Signed-off-by: Ville Syrjälä Reviewed-by: Damien Lespiau Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5bd55e947abd..445e84e2be74 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1680,7 +1680,7 @@ enum punit_power_well { # define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */ # define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5) # define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4) -/** +/* * This bit must be set on the 830 to prevent hangs when turning off the * overlay scaler. */ @@ -1700,12 +1700,12 @@ enum punit_power_well { # define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7) # define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6) # define MAG_CLOCK_GATE_DISABLE (1 << 5) -/** This bit must be unset on 855,865 */ +/* This bit must be unset on 855,865 */ # define MECI_CLOCK_GATE_DISABLE (1 << 4) # define DCMP_CLOCK_GATE_DISABLE (1 << 3) # define MEC_CLOCK_GATE_DISABLE (1 << 2) # define MECO_CLOCK_GATE_DISABLE (1 << 1) -/** This bit must be set on 855,865. */ +/* This bit must be set on 855,865. */ # define SV_CLOCK_GATE_DISABLE (1 << 0) # define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16) # define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15) @@ -1726,14 +1726,14 @@ enum punit_power_well { # define I915_BY_CLOCK_GATE_DISABLE (1 << 0) # define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30) -/** This bit must always be set on 965G/965GM */ +/* This bit must always be set on 965G/965GM */ # define I965_RCC_CLOCK_GATE_DISABLE (1 << 29) # define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28) # define I965_DAP_CLOCK_GATE_DISABLE (1 << 27) # define I965_ROC_CLOCK_GATE_DISABLE (1 << 26) # define I965_GW_CLOCK_GATE_DISABLE (1 << 25) # define I965_TD_CLOCK_GATE_DISABLE (1 << 24) -/** This bit must always be set on 965G */ +/* This bit must always be set on 965G */ # define I965_ISC_CLOCK_GATE_DISABLE (1 << 23) # define I965_IC_CLOCK_GATE_DISABLE (1 << 22) # define I965_EU_CLOCK_GATE_DISABLE (1 << 21) @@ -1800,7 +1800,7 @@ enum punit_power_well { /* Memory controller frequency in MCHBAR for Haswell (possible SNB+) */ #define DCLK (MCHBAR_MIRROR_BASE_SNB + 0x5e04) -/** 915-945 and GM965 MCH register controlling DRAM channel access */ +/* 915-945 and GM965 MCH register controlling DRAM channel access */ #define DCC 0x10200 #define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0) #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0) @@ -1809,15 +1809,15 @@ enum punit_power_well { #define DCC_CHANNEL_XOR_DISABLE (1 << 10) #define DCC_CHANNEL_XOR_BIT_17 (1 << 9) -/** Pineview MCH register contains DDR3 setting */ +/* Pineview MCH register contains DDR3 setting */ #define CSHRDDR3CTL 0x101a8 #define CSHRDDR3CTL_DDR3 (1 << 2) -/** 965 MCH register controlling DRAM channel configuration */ +/* 965 MCH register controlling DRAM channel configuration */ #define C0DRB3 0x10206 #define C1DRB3 0x10606 -/** snb MCH registers for reading the DRAM channel configuration */ +/* snb MCH registers for reading the DRAM channel configuration */ #define MAD_DIMM_C0 (MCHBAR_MIRROR_BASE_SNB + 0x5004) #define MAD_DIMM_C1 (MCHBAR_MIRROR_BASE_SNB + 0x5008) #define MAD_DIMM_C2 (MCHBAR_MIRROR_BASE_SNB + 0x500C) @@ -1839,7 +1839,7 @@ enum punit_power_well { #define MAD_DIMM_A_SIZE_SHIFT 0 #define MAD_DIMM_A_SIZE_MASK (0xff << MAD_DIMM_A_SIZE_SHIFT) -/** snb MCH registers for priority tuning */ +/* snb MCH registers for priority tuning */ #define MCH_SSKPD (MCHBAR_MIRROR_BASE_SNB + 0x5d10) #define MCH_SSKPD_WM0_MASK 0x3f #define MCH_SSKPD_WM0_VAL 0xc @@ -2513,7 +2513,7 @@ enum punit_power_well { #define SDVO_PIPE_B_SELECT (1 << 30) #define SDVO_STALL_SELECT (1 << 29) #define SDVO_INTERRUPT_ENABLE (1 << 26) -/** +/* * 915G/GM SDVO pixel multiplier. * Programmed value is multiplier - 1, up to 5x. * \sa DPLL_MD_UDI_MULTIPLIER_MASK @@ -2827,65 +2827,65 @@ enum punit_power_well { /* TV port control */ #define TV_CTL 0x68000 -/** Enables the TV encoder */ +/* Enables the TV encoder */ # define TV_ENC_ENABLE (1 << 31) -/** Sources the TV encoder input from pipe B instead of A. */ +/* Sources the TV encoder input from pipe B instead of A. */ # define TV_ENC_PIPEB_SELECT (1 << 30) -/** Outputs composite video (DAC A only) */ +/* Outputs composite video (DAC A only) */ # define TV_ENC_OUTPUT_COMPOSITE (0 << 28) -/** Outputs SVideo video (DAC B/C) */ +/* Outputs SVideo video (DAC B/C) */ # define TV_ENC_OUTPUT_SVIDEO (1 << 28) -/** Outputs Component video (DAC A/B/C) */ +/* Outputs Component video (DAC A/B/C) */ # define TV_ENC_OUTPUT_COMPONENT (2 << 28) -/** Outputs Composite and SVideo (DAC A/B/C) */ +/* Outputs Composite and SVideo (DAC A/B/C) */ # define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28) # define TV_TRILEVEL_SYNC (1 << 21) -/** Enables slow sync generation (945GM only) */ +/* Enables slow sync generation (945GM only) */ # define TV_SLOW_SYNC (1 << 20) -/** Selects 4x oversampling for 480i and 576p */ +/* Selects 4x oversampling for 480i and 576p */ # define TV_OVERSAMPLE_4X (0 << 18) -/** Selects 2x oversampling for 720p and 1080i */ +/* Selects 2x oversampling for 720p and 1080i */ # define TV_OVERSAMPLE_2X (1 << 18) -/** Selects no oversampling for 1080p */ +/* Selects no oversampling for 1080p */ # define TV_OVERSAMPLE_NONE (2 << 18) -/** Selects 8x oversampling */ +/* Selects 8x oversampling */ # define TV_OVERSAMPLE_8X (3 << 18) -/** Selects progressive mode rather than interlaced */ +/* Selects progressive mode rather than interlaced */ # define TV_PROGRESSIVE (1 << 17) -/** Sets the colorburst to PAL mode. Required for non-M PAL modes. */ +/* Sets the colorburst to PAL mode. Required for non-M PAL modes. */ # define TV_PAL_BURST (1 << 16) -/** Field for setting delay of Y compared to C */ +/* Field for setting delay of Y compared to C */ # define TV_YC_SKEW_MASK (7 << 12) -/** Enables a fix for 480p/576p standard definition modes on the 915GM only */ +/* Enables a fix for 480p/576p standard definition modes on the 915GM only */ # define TV_ENC_SDP_FIX (1 << 11) -/** +/* * Enables a fix for the 915GM only. * * Not sure what it does. */ # define TV_ENC_C0_FIX (1 << 10) -/** Bits that must be preserved by software */ +/* Bits that must be preserved by software */ # define TV_CTL_SAVE ((1 << 11) | (3 << 9) | (7 << 6) | 0xf) # define TV_FUSE_STATE_MASK (3 << 4) -/** Read-only state that reports all features enabled */ +/* Read-only state that reports all features enabled */ # define TV_FUSE_STATE_ENABLED (0 << 4) -/** Read-only state that reports that Macrovision is disabled in hardware*/ +/* Read-only state that reports that Macrovision is disabled in hardware*/ # define TV_FUSE_STATE_NO_MACROVISION (1 << 4) -/** Read-only state that reports that TV-out is disabled in hardware. */ +/* Read-only state that reports that TV-out is disabled in hardware. */ # define TV_FUSE_STATE_DISABLED (2 << 4) -/** Normal operation */ +/* Normal operation */ # define TV_TEST_MODE_NORMAL (0 << 0) -/** Encoder test pattern 1 - combo pattern */ +/* Encoder test pattern 1 - combo pattern */ # define TV_TEST_MODE_PATTERN_1 (1 << 0) -/** Encoder test pattern 2 - full screen vertical 75% color bars */ +/* Encoder test pattern 2 - full screen vertical 75% color bars */ # define TV_TEST_MODE_PATTERN_2 (2 << 0) -/** Encoder test pattern 3 - full screen horizontal 75% color bars */ +/* Encoder test pattern 3 - full screen horizontal 75% color bars */ # define TV_TEST_MODE_PATTERN_3 (3 << 0) -/** Encoder test pattern 4 - random noise */ +/* Encoder test pattern 4 - random noise */ # define TV_TEST_MODE_PATTERN_4 (4 << 0) -/** Encoder test pattern 5 - linear color ramps */ +/* Encoder test pattern 5 - linear color ramps */ # define TV_TEST_MODE_PATTERN_5 (5 << 0) -/** +/* * This test mode forces the DACs to 50% of full output. * * This is used for load detection in combination with TVDAC_SENSE_MASK @@ -2895,35 +2895,35 @@ enum punit_power_well { #define TV_DAC 0x68004 # define TV_DAC_SAVE 0x00ffff00 -/** +/* * Reports that DAC state change logic has reported change (RO). * * This gets cleared when TV_DAC_STATE_EN is cleared */ # define TVDAC_STATE_CHG (1 << 31) # define TVDAC_SENSE_MASK (7 << 28) -/** Reports that DAC A voltage is above the detect threshold */ +/* Reports that DAC A voltage is above the detect threshold */ # define TVDAC_A_SENSE (1 << 30) -/** Reports that DAC B voltage is above the detect threshold */ +/* Reports that DAC B voltage is above the detect threshold */ # define TVDAC_B_SENSE (1 << 29) -/** Reports that DAC C voltage is above the detect threshold */ +/* Reports that DAC C voltage is above the detect threshold */ # define TVDAC_C_SENSE (1 << 28) -/** +/* * Enables DAC state detection logic, for load-based TV detection. * * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set * to off, for load detection to work. */ # define TVDAC_STATE_CHG_EN (1 << 27) -/** Sets the DAC A sense value to high */ +/* Sets the DAC A sense value to high */ # define TVDAC_A_SENSE_CTL (1 << 26) -/** Sets the DAC B sense value to high */ +/* Sets the DAC B sense value to high */ # define TVDAC_B_SENSE_CTL (1 << 25) -/** Sets the DAC C sense value to high */ +/* Sets the DAC C sense value to high */ # define TVDAC_C_SENSE_CTL (1 << 24) -/** Overrides the ENC_ENABLE and DAC voltage levels */ +/* Overrides the ENC_ENABLE and DAC voltage levels */ # define DAC_CTL_OVERRIDE (1 << 7) -/** Sets the slew rate. Must be preserved in software */ +/* Sets the slew rate. Must be preserved in software */ # define ENC_TVDAC_SLEW_FAST (1 << 6) # define DAC_A_1_3_V (0 << 4) # define DAC_A_1_1_V (1 << 4) @@ -2938,7 +2938,7 @@ enum punit_power_well { # define DAC_C_0_7_V (2 << 0) # define DAC_C_MASK (3 << 0) -/** +/* * CSC coefficients are stored in a floating point format with 9 bits of * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n, * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with @@ -2953,7 +2953,7 @@ enum punit_power_well { #define TV_CSC_Y2 0x68014 # define TV_BY_MASK 0x07ff0000 # define TV_BY_SHIFT 16 -/** +/* * Y attenuation for component video. * * Stored in 1.9 fixed point. @@ -2970,7 +2970,7 @@ enum punit_power_well { #define TV_CSC_U2 0x6801c # define TV_BU_MASK 0x07ff0000 # define TV_BU_SHIFT 16 -/** +/* * U attenuation for component video. * * Stored in 1.9 fixed point. @@ -2987,7 +2987,7 @@ enum punit_power_well { #define TV_CSC_V2 0x68024 # define TV_BV_MASK 0x07ff0000 # define TV_BV_SHIFT 16 -/** +/* * V attenuation for component video. * * Stored in 1.9 fixed point. @@ -2996,74 +2996,74 @@ enum punit_power_well { # define TV_AV_SHIFT 0 #define TV_CLR_KNOBS 0x68028 -/** 2s-complement brightness adjustment */ +/* 2s-complement brightness adjustment */ # define TV_BRIGHTNESS_MASK 0xff000000 # define TV_BRIGHTNESS_SHIFT 24 -/** Contrast adjustment, as a 2.6 unsigned floating point number */ +/* Contrast adjustment, as a 2.6 unsigned floating point number */ # define TV_CONTRAST_MASK 0x00ff0000 # define TV_CONTRAST_SHIFT 16 -/** Saturation adjustment, as a 2.6 unsigned floating point number */ +/* Saturation adjustment, as a 2.6 unsigned floating point number */ # define TV_SATURATION_MASK 0x0000ff00 # define TV_SATURATION_SHIFT 8 -/** Hue adjustment, as an integer phase angle in degrees */ +/* Hue adjustment, as an integer phase angle in degrees */ # define TV_HUE_MASK 0x000000ff # define TV_HUE_SHIFT 0 #define TV_CLR_LEVEL 0x6802c -/** Controls the DAC level for black */ +/* Controls the DAC level for black */ # define TV_BLACK_LEVEL_MASK 0x01ff0000 # define TV_BLACK_LEVEL_SHIFT 16 -/** Controls the DAC level for blanking */ +/* Controls the DAC level for blanking */ # define TV_BLANK_LEVEL_MASK 0x000001ff # define TV_BLANK_LEVEL_SHIFT 0 #define TV_H_CTL_1 0x68030 -/** Number of pixels in the hsync. */ +/* Number of pixels in the hsync. */ # define TV_HSYNC_END_MASK 0x1fff0000 # define TV_HSYNC_END_SHIFT 16 -/** Total number of pixels minus one in the line (display and blanking). */ +/* Total number of pixels minus one in the line (display and blanking). */ # define TV_HTOTAL_MASK 0x00001fff # define TV_HTOTAL_SHIFT 0 #define TV_H_CTL_2 0x68034 -/** Enables the colorburst (needed for non-component color) */ +/* Enables the colorburst (needed for non-component color) */ # define TV_BURST_ENA (1 << 31) -/** Offset of the colorburst from the start of hsync, in pixels minus one. */ +/* Offset of the colorburst from the start of hsync, in pixels minus one. */ # define TV_HBURST_START_SHIFT 16 # define TV_HBURST_START_MASK 0x1fff0000 -/** Length of the colorburst */ +/* Length of the colorburst */ # define TV_HBURST_LEN_SHIFT 0 # define TV_HBURST_LEN_MASK 0x0001fff #define TV_H_CTL_3 0x68038 -/** End of hblank, measured in pixels minus one from start of hsync */ +/* End of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_END_SHIFT 16 # define TV_HBLANK_END_MASK 0x1fff0000 -/** Start of hblank, measured in pixels minus one from start of hsync */ +/* Start of hblank, measured in pixels minus one from start of hsync */ # define TV_HBLANK_START_SHIFT 0 # define TV_HBLANK_START_MASK 0x0001fff #define TV_V_CTL_1 0x6803c -/** XXX */ +/* XXX */ # define TV_NBR_END_SHIFT 16 # define TV_NBR_END_MASK 0x07ff0000 -/** XXX */ +/* XXX */ # define TV_VI_END_F1_SHIFT 8 # define TV_VI_END_F1_MASK 0x00003f00 -/** XXX */ +/* XXX */ # define TV_VI_END_F2_SHIFT 0 # define TV_VI_END_F2_MASK 0x0000003f #define TV_V_CTL_2 0x68040 -/** Length of vsync, in half lines */ +/* Length of vsync, in half lines */ # define TV_VSYNC_LEN_MASK 0x07ff0000 # define TV_VSYNC_LEN_SHIFT 16 -/** Offset of the start of vsync in field 1, measured in one less than the +/* Offset of the start of vsync in field 1, measured in one less than the * number of half lines. */ # define TV_VSYNC_START_F1_MASK 0x00007f00 # define TV_VSYNC_START_F1_SHIFT 8 -/** +/* * Offset of the start of vsync in field 2, measured in one less than the * number of half lines. */ @@ -3071,17 +3071,17 @@ enum punit_power_well { # define TV_VSYNC_START_F2_SHIFT 0 #define TV_V_CTL_3 0x68044 -/** Enables generation of the equalization signal */ +/* Enables generation of the equalization signal */ # define TV_EQUAL_ENA (1 << 31) -/** Length of vsync, in half lines */ +/* Length of vsync, in half lines */ # define TV_VEQ_LEN_MASK 0x007f0000 # define TV_VEQ_LEN_SHIFT 16 -/** Offset of the start of equalization in field 1, measured in one less than +/* Offset of the start of equalization in field 1, measured in one less than * the number of half lines. */ # define TV_VEQ_START_F1_MASK 0x0007f00 # define TV_VEQ_START_F1_SHIFT 8 -/** +/* * Offset of the start of equalization in field 2, measured in one less than * the number of half lines. */ @@ -3089,13 +3089,13 @@ enum punit_power_well { # define TV_VEQ_START_F2_SHIFT 0 #define TV_V_CTL_4 0x68048 -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F1_MASK 0x003f0000 # define TV_VBURST_START_F1_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ @@ -3103,13 +3103,13 @@ enum punit_power_well { # define TV_VBURST_END_F1_SHIFT 0 #define TV_V_CTL_5 0x6804c -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F2_MASK 0x003f0000 # define TV_VBURST_START_F2_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ @@ -3117,13 +3117,13 @@ enum punit_power_well { # define TV_VBURST_END_F2_SHIFT 0 #define TV_V_CTL_6 0x68050 -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F3_MASK 0x003f0000 # define TV_VBURST_START_F3_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ @@ -3131,13 +3131,13 @@ enum punit_power_well { # define TV_VBURST_END_F3_SHIFT 0 #define TV_V_CTL_7 0x68054 -/** +/* * Offset to start of vertical colorburst, measured in one less than the * number of lines from vertical start. */ # define TV_VBURST_START_F4_MASK 0x003f0000 # define TV_VBURST_START_F4_SHIFT 16 -/** +/* * Offset to the end of vertical colorburst, measured in one less than the * number of lines from the start of NBR. */ @@ -3145,56 +3145,56 @@ enum punit_power_well { # define TV_VBURST_END_F4_SHIFT 0 #define TV_SC_CTL_1 0x68060 -/** Turns on the first subcarrier phase generation DDA */ +/* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA1_EN (1 << 31) -/** Turns on the first subcarrier phase generation DDA */ +/* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA2_EN (1 << 30) -/** Turns on the first subcarrier phase generation DDA */ +/* Turns on the first subcarrier phase generation DDA */ # define TV_SC_DDA3_EN (1 << 29) -/** Sets the subcarrier DDA to reset frequency every other field */ +/* Sets the subcarrier DDA to reset frequency every other field */ # define TV_SC_RESET_EVERY_2 (0 << 24) -/** Sets the subcarrier DDA to reset frequency every fourth field */ +/* Sets the subcarrier DDA to reset frequency every fourth field */ # define TV_SC_RESET_EVERY_4 (1 << 24) -/** Sets the subcarrier DDA to reset frequency every eighth field */ +/* Sets the subcarrier DDA to reset frequency every eighth field */ # define TV_SC_RESET_EVERY_8 (2 << 24) -/** Sets the subcarrier DDA to never reset the frequency */ +/* Sets the subcarrier DDA to never reset the frequency */ # define TV_SC_RESET_NEVER (3 << 24) -/** Sets the peak amplitude of the colorburst.*/ +/* Sets the peak amplitude of the colorburst.*/ # define TV_BURST_LEVEL_MASK 0x00ff0000 # define TV_BURST_LEVEL_SHIFT 16 -/** Sets the increment of the first subcarrier phase generation DDA */ +/* Sets the increment of the first subcarrier phase generation DDA */ # define TV_SCDDA1_INC_MASK 0x00000fff # define TV_SCDDA1_INC_SHIFT 0 #define TV_SC_CTL_2 0x68064 -/** Sets the rollover for the second subcarrier phase generation DDA */ +/* Sets the rollover for the second subcarrier phase generation DDA */ # define TV_SCDDA2_SIZE_MASK 0x7fff0000 # define TV_SCDDA2_SIZE_SHIFT 16 -/** Sets the increent of the second subcarrier phase generation DDA */ +/* Sets the increent of the second subcarrier phase generation DDA */ # define TV_SCDDA2_INC_MASK 0x00007fff # define TV_SCDDA2_INC_SHIFT 0 #define TV_SC_CTL_3 0x68068 -/** Sets the rollover for the third subcarrier phase generation DDA */ +/* Sets the rollover for the third subcarrier phase generation DDA */ # define TV_SCDDA3_SIZE_MASK 0x7fff0000 # define TV_SCDDA3_SIZE_SHIFT 16 -/** Sets the increent of the third subcarrier phase generation DDA */ +/* Sets the increent of the third subcarrier phase generation DDA */ # define TV_SCDDA3_INC_MASK 0x00007fff # define TV_SCDDA3_INC_SHIFT 0 #define TV_WIN_POS 0x68070 -/** X coordinate of the display from the start of horizontal active */ +/* X coordinate of the display from the start of horizontal active */ # define TV_XPOS_MASK 0x1fff0000 # define TV_XPOS_SHIFT 16 -/** Y coordinate of the display from the start of vertical active (NBR) */ +/* Y coordinate of the display from the start of vertical active (NBR) */ # define TV_YPOS_MASK 0x00000fff # define TV_YPOS_SHIFT 0 #define TV_WIN_SIZE 0x68074 -/** Horizontal size of the display window, measured in pixels*/ +/* Horizontal size of the display window, measured in pixels*/ # define TV_XSIZE_MASK 0x1fff0000 # define TV_XSIZE_SHIFT 16 -/** +/* * Vertical size of the display window, measured in pixels. * * Must be even for interlaced modes. @@ -3203,28 +3203,28 @@ enum punit_power_well { # define TV_YSIZE_SHIFT 0 #define TV_FILTER_CTL_1 0x68080 -/** +/* * Enables automatic scaling calculation. * * If set, the rest of the registers are ignored, and the calculated values can * be read back from the register. */ # define TV_AUTO_SCALE (1 << 31) -/** +/* * Disables the vertical filter. * * This is required on modes more than 1024 pixels wide */ # define TV_V_FILTER_BYPASS (1 << 29) -/** Enables adaptive vertical filtering */ +/* Enables adaptive vertical filtering */ # define TV_VADAPT (1 << 28) # define TV_VADAPT_MODE_MASK (3 << 26) -/** Selects the least adaptive vertical filtering mode */ +/* Selects the least adaptive vertical filtering mode */ # define TV_VADAPT_MODE_LEAST (0 << 26) -/** Selects the moderately adaptive vertical filtering mode */ +/* Selects the moderately adaptive vertical filtering mode */ # define TV_VADAPT_MODE_MODERATE (1 << 26) -/** Selects the most adaptive vertical filtering mode */ +/* Selects the most adaptive vertical filtering mode */ # define TV_VADAPT_MODE_MOST (3 << 26) -/** +/* * Sets the horizontal scaling factor. * * This should be the fractional part of the horizontal scaling factor divided @@ -3236,14 +3236,14 @@ enum punit_power_well { # define TV_HSCALE_FRAC_SHIFT 0 #define TV_FILTER_CTL_2 0x68084 -/** +/* * Sets the integer part of the 3.15 fixed-point vertical scaling factor. * * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1) */ # define TV_VSCALE_INT_MASK 0x00038000 # define TV_VSCALE_INT_SHIFT 15 -/** +/* * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. * * \sa TV_VSCALE_INT_MASK @@ -3252,7 +3252,7 @@ enum punit_power_well { # define TV_VSCALE_FRAC_SHIFT 0 #define TV_FILTER_CTL_3 0x68088 -/** +/* * Sets the integer part of the 3.15 fixed-point vertical scaling factor. * * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1)) @@ -3261,7 +3261,7 @@ enum punit_power_well { */ # define TV_VSCALE_IP_INT_MASK 0x00038000 # define TV_VSCALE_IP_INT_SHIFT 15 -/** +/* * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. * * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. @@ -3273,26 +3273,26 @@ enum punit_power_well { #define TV_CC_CONTROL 0x68090 # define TV_CC_ENABLE (1 << 31) -/** +/* * Specifies which field to send the CC data in. * * CC data is usually sent in field 0. */ # define TV_CC_FID_MASK (1 << 27) # define TV_CC_FID_SHIFT 27 -/** Sets the horizontal position of the CC data. Usually 135. */ +/* Sets the horizontal position of the CC data. Usually 135. */ # define TV_CC_HOFF_MASK 0x03ff0000 # define TV_CC_HOFF_SHIFT 16 -/** Sets the vertical position of the CC data. Usually 21 */ +/* Sets the vertical position of the CC data. Usually 21 */ # define TV_CC_LINE_MASK 0x0000003f # define TV_CC_LINE_SHIFT 0 #define TV_CC_DATA 0x68094 # define TV_CC_RDY (1 << 31) -/** Second word of CC data to be transmitted. */ +/* Second word of CC data to be transmitted. */ # define TV_CC_DATA_2_MASK 0x007f0000 # define TV_CC_DATA_2_SHIFT 16 -/** First word of CC data to be transmitted. */ +/* First word of CC data to be transmitted. */ # define TV_CC_DATA_1_MASK 0x0000007f # define TV_CC_DATA_1_SHIFT 0 @@ -3363,32 +3363,32 @@ enum punit_power_well { #define DP_PLL_FREQ_160MHZ (1 << 16) #define DP_PLL_FREQ_MASK (3 << 16) -/** locked once port is enabled */ +/* locked once port is enabled */ #define DP_PORT_REVERSAL (1 << 15) /* eDP */ #define DP_PLL_ENABLE (1 << 14) -/** sends the clock on lane 15 of the PEG for debug */ +/* sends the clock on lane 15 of the PEG for debug */ #define DP_CLOCK_OUTPUT_ENABLE (1 << 13) #define DP_SCRAMBLING_DISABLE (1 << 12) #define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7) -/** limit RGB values to avoid confusing TVs */ +/* limit RGB values to avoid confusing TVs */ #define DP_COLOR_RANGE_16_235 (1 << 8) -/** Turn on the audio link */ +/* Turn on the audio link */ #define DP_AUDIO_OUTPUT_ENABLE (1 << 6) -/** vs and hs sync polarity */ +/* vs and hs sync polarity */ #define DP_SYNC_VS_HIGH (1 << 4) #define DP_SYNC_HS_HIGH (1 << 3) -/** A fantasy */ +/* A fantasy */ #define DP_DETECTED (1 << 2) -/** The aux channel provides a way to talk to the +/* The aux channel provides a way to talk to the * signal sink for DDC etc. Max packet size supported * is 20 bytes in each direction, hence the 5 fixed * data registers