From: Javier Martinez Canillas Date: Fri, 30 Sep 2011 23:33:50 +0000 (-0300) Subject: [media] tvp5150: Add video format registers configuration values X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=64933337e3cb61ca555969a35ab68b477db34ee2;p=linux-beck.git [media] tvp5150: Add video format registers configuration values The tvp5150 video decoder has two operation modes to configure the video standard used. If auto-switch mode is enable, the device can sense the signal and detect which video standard the device is operating. Also the device can be forced to use a user defined video standard. Each operation mode uses a different register and the bitmask values to represent each standard is different. So we add video standard constants for both autoswitch and no-autoswitch mode. Signed-off-by: Javier Martinez Canillas Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/tvp5150_reg.h b/drivers/media/video/tvp5150_reg.h index 4240043c0b2a..25a994944918 100644 --- a/drivers/media/video/tvp5150_reg.h +++ b/drivers/media/video/tvp5150_reg.h @@ -45,7 +45,22 @@ /* Reserved 1Fh-27h */ -#define TVP5150_VIDEO_STD 0x28 /* Video standard */ +#define VIDEO_STD_MASK (0x07 >> 1) +#define TVP5150_VIDEO_STD 0x28 /* Video standard */ +#define VIDEO_STD_AUTO_SWITCH_BIT 0x00 +#define VIDEO_STD_NTSC_MJ_BIT 0x02 +#define VIDEO_STD_PAL_BDGHIN_BIT 0x04 +#define VIDEO_STD_PAL_M_BIT 0x06 +#define VIDEO_STD_PAL_COMBINATION_N_BIT 0x08 +#define VIDEO_STD_NTSC_4_43_BIT 0x0a +#define VIDEO_STD_SECAM_BIT 0x0c + +#define VIDEO_STD_NTSC_MJ_BIT_AS 0x01 +#define VIDEO_STD_PAL_BDGHIN_BIT_AS 0x03 +#define VIDEO_STD_PAL_M_BIT_AS 0x05 +#define VIDEO_STD_PAL_COMBINATION_N_BIT_AS 0x07 +#define VIDEO_STD_NTSC_4_43_BIT_AS 0x09 +#define VIDEO_STD_SECAM_BIT_AS 0x0b /* Reserved 29h-2bh */